传感器可靠性技术—传感器可靠性特征量

介绍已知试验数据如何计算可靠性特征量的点估计和区间估计     

中和室脉冲进气的蒙特卡罗模拟及实验验证

对于中和室内的脉冲气体，用蒙特卡罗方法模拟了气体压力沿轴向的分布。并用模拟进气系统和气压瞬时测量系统，对模拟结果进行了验证。得到与模拟结果较为一致的曲线，从而为注入器真空系统的设计提供了可靠的依据。并通过实验结果，给出了气体靶厚的建立时间约为６０ｍｓ。     

MIM隧道结的电子输运特性和发光研究

论述作为一种新型发光器件的ＭＩＭ隧道结的发光机理，报告了该器件的发光现象和Ｉ－Ｖ特性曲线中负阻现象的实验观察。数据显示，结中表面等离极化激元（ＳＰＰ）与粗糙度的耦合是引起光发射的主要方面，ＳＰＰ对隧穿电子的阻塞作用导致了电子输运中的负阻现象。此外，还观察到了直接辐射的紫外峰。     

几种火焰喷焊自熔性合金层的耐磨性能

研究了不同自熔性合金粉末火焰喷焊层的显微组织与抗磨粒磨损性能，并对其磨面形貌进行了ＳＥＭ观察分析。结果表明，在Ｎｉ６０自熔性合金中加入适量的镍包ＷＣ粉末可明显提高其喷焊层的抗磨粒磨损性能。当ＷＣ的加入量为３５％（ｗｔ）左右时，该喷焊层与６０Ｓｉ２Ｍｎ调质钢相比，相对的耐磨性可提高６倍以上。     

A study of stacking faults in deformed austenitic stainless steel by X-ray diffraction

Making use of the data obtained already in our laboratory on elongated, quenched samples of austenitic steel lCrl8Ni9, such as the effective domain size D_eff, the average dislocation density-ρ, the average dislocation configuration parameter, -M, the range of strain field -R_e, the elastic energy density 〈E/V〉,etc., some exact and clear expressions for the relation of intrinsic stack-ing fault (SF) density α′, extrinsic SF density α″, twin fault density β, SF energy γ, true particle size D₀, minimum value of the fault width T_min, and maximum particle size D_max are given.     

二流量试井工艺及资料解释分析方法

描述了二流量试井工艺的实现，从常规分析和双对数曲线拟合两上方面，给出了二流量试井的资料解释分析方法，分析认为二流量试井同样可以计算出正常关井测压力恢复（或压力降落）资料所解释的油藏及流体参数。这种试井方法不但可以减少因正常关井测压对产油量和注水量的影响，而且可以减缓因突然关、开井造成的套管变形或损坏。实践证明，该试井技术方法具有较好的经济效益和应用前景。     

The 3DP: a processor architecture for three-dimensionalapplications

The 3DP (3-Dimensional Processor), a parallel-computing architecture that targets problems that have a 3-D numerical structure and require numerous calculations on 3-D vectors, is described. The 3DP architecture differs from traditional scalar architectures in that it operates directly on vectors. It differs from general parallel architectures in that it can solve problems that predict the behavior of highly coupled systems, and it differs from vector architectures in that it runs efficiently on length-3 vectors. Object-oriented programming on the 3DP and programming the 3DP in C++ are discussed. 3DP performance is reviewed, and the current implementation of the 3DP architecture, as an attached processor that plugs directly into Sun host VMEbus, is described     

An isolated ZVS/ZCS flyback converter using the leakage inductanceof the coupled inductor

This paper describes a simple and effective way to modify an existing hard-switched flyback power converter into a circuit with zero-voltage switching (ZVS) and zero-current switching (ZCS). The key improvement is to turn the unattractive features of the coupled inductor leakage inductance and snubber capacitor into attractive ones. The coupled inductor leakage inductance and snubber are used to form a quasi-resonant circuit to facilitate ZVS/ZCS of all power devices. The operating principles of the power converter and experimental results are presented     

计算机轧辊管理软件

使用计算机管理轧辊可以非常方便地查询每一条轧辊的材质、产地、车削情况使用情况及该辊的轧制产量等数据，并可根据要求打印表格或轧辊消耗报表。