基于运动的摄像机定标方法的综述

该文从运动方式角度将摄像机定标方式分为非限定运动方式和限定运动方式两大类,分别对摄像机各种运动方式对定标技术的影响进行了系统的研究,在应用中应该根据具体情况选择合适的摄像机的运动方式,以满足实际问题的需要。     

Estimation for the number of components in a mixture model using stepwise split-and-merge EM algorithm

The main difficulty with EM algorithm for mixture model concerns the number of components, say g. This is the question of model selection, and the EM algorithm itself could not estimate g. On the contrary, the algorithm requires g to be specified before the remaining parameters can be estimated. To solve this problem, a new algorithm, which is called stepwise split-and-merge EM (SSMEM) algorithm, is proposed. The SSMEM algorithm alternately splits and merges components, estimating g and other parameters of components simultaneously. Also, two novel criteria are introduced to efficiently select the components for split or merge. Experimental results on simulated and real data demonstrate the effectivity of the proposed algorithm.     

不同锌钛比对纳米钛酸锌（ZnO—TiO2）体系成分的影响

以工业偏钛酸、硫酸锌、氨水为主要原料，用直接沉淀法并进行热处理得到钛酸锌粉体，并用XRD对产物成分进行了检测。结果表明，不同的锌钛比对钛酸锌（ZnO-TiO2）体系的成分有较大影响。     

岩土体斜(边)坡滑坡发生的机理

根据滑坡发生的初始条件、滑坡成因及方式表象,对常见的蠕变倾覆滑坡、卸荷滑坡、震动液化平推滑坡、潜蚀塌陷滑坡、溶蚀下陷滑坡、孔隙水压浮动滑坡和人工切蚀或冲(浪)蚀—加载滑坡等机理进行了分析.     

电子束、离子束与蓝宝石相互作用的研究

研究了电子束、离子束作用于Al2O3表面时成分的变化，表明无论电子束或离子束都能使Al2O3发生分解，产生导电的元素Al。实验在PHI610·SAM上进行，电子束轰击下（3keV，O．5μA，入射角60°）10s就有元素Al分解出来，2min以后就达到饱和，分解析出量随时间成a（1－e－bt）的关系。离子束轰击下同样发生元素Al的分解，但当Ei＞3keV时，由于剥离速率加大，溅射5min时表面Al峰反而比1min时要弱。这时表面Al含量处于分解析出与溅射剥离的动态平衡中。实验还发现了Al2O3的解析与表面成分有关（如碳的含量）。最后讨论电子束与离子束的解析机理。     

基于知识的可重用构件查询系统KCQ

本文提出了一个基于知识的、支持面向对象程序设计方法的软件重用构件查询系统，本系统采用了语义网络知识表示模型，提供了构件知识表示语言ＣＫＲＬ，来描述可重用构件的特征和用于检索的知识．提供了语义网络联想式查询、条件查询和构件评价．     

Performance of advanced resuscitation skills by pediatric housestaff

OBJECTIVE: To describe pediatric housestaff resuscitation experience and their ability to perform key resuscitation skills. DESIGN: Cohort study of 63 pediatric residents in a university-based training program. PARTICIPANTS AND METHODS: Investigators observed, scored, and timed resident performance on 4 key resuscitation skills. Cognitive ability was tested with 4 written scenarios. Housestaff provided self-reports of the number of months since their last American Heart Association Pediatric Advanced Life Support course, number of mock and actual codes attended, number of times skills were performed, and self-confidence with respect to resuscitation. RESULTS: A total of 45 pediatric residents (71%) participated. Median cognitive score was 5 (range, 1-5). Of all residents, 44 (97%) successfully bag mask-ventilated the mannequin; 24 (53%) and 36 (80%) used the correct bag and mask size, respectively. Thirty-nine residents (87%) placed a tube in the mannequin trachea, 12 (27%) checked that suction was working prior to intubation, and 30 (67%) chose the correct endotracheal tube size. Forty residents (89%) discharged the defibrillator, and 25 (56%) and 32 (71%) correctly chose asynchronous mode and infant paddles, respectively. Thirty-eight residents (84%) inserted an intraosseous line; 35 (78%) had correct placement. Median times for successful skill completion were 83 seconds for bag mask ventilation, 136 seconds for intubation, 149 seconds for defibrillation, and 68 seconds for intraosseous line placement. CONCLUSION: Pediatric housestaff previously trained in pediatric advanced life support were generally able to reach the end point of 4 key resuscitation skills but less frequently performed the specific subcomponents of each skill. This poor performance and the prolonged time to skill completion suggest the need for greater attention to detail during training.     

无线随钻测量技术的应用现状与发展趋势

目前,无线随钻测量技术是石油工程技术发展的一个主要方向。详细介绍了无线随钻测量仪器的传输方式、国内外无线随钻测量技术的主要进展和应用现状,指出了国内外无线随钻测量仪器的优缺点和应用范围,分析了无线随钻测量技术的发展趋势,并提出我国应在借鉴国外先进的无线随钻测量技术的基础上,研制具有自主知识产权的无线随钻测量仪器,以加快我国无线随钻测量技术的发展,缩短与国际先进水平的差距。     

长庆油田苏平1井固井技术研究与应用

苏平l井完井方式运用了技术套管一次上返、悬挂尾管和筛管技术。该井技术套管段井眼大、裸眼段长，加上大斜度、小间隙的尾管段．对水泥浆体系的性能要求较高。总结分析了长庆天然气水平井苏平l井的固井技术问题，介绍了苏平l井的井身结构与地层性质。通过研究．确定采用低失水GSJ水泥浆体系。该体系成功地应用在三次工程建井过程中，解决了长裸眼、大灰量、大斜度、尾管小间隙等固井技术问题。固井质量达到工程要求。     

合成2,4-二叔丁基苯酚工业试验

以离子交换树脂为催化剂，苯酚和甲基叔丁基醚为原料合成2，4-二叔丁基苯酚(简称2，4酚)，合成产物经过滤再经间歇真空精馏精制提纯，得到高纯度的2，4酚成品。成品精馏后釜中残液在酸性白土催化剂的作用下通过歧化反应生成对叔丁基苯酚，再经精馏提纯得到成品对叔丁基苯酚。通过工艺优化，使2，4酚、对叔丁基苯酚形成联产生产工艺，降低了生产原料消耗和成本。