Decode‐and‐forward with full‐duplex relaying

This paper addresses the full‐duplex relaying. Some expressions for outage and average capacity of a two‐hop cooperative system with a full‐duplex relay are derived under an independent but not identically distributed Rayleigh fading environment. Using these expressions, we provide the performance analysis without Monte Carlo simulations. The impact of interference between the relay output and input is investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

VoIP电话的安全问题及防护措施

VoIP电话是综合了传统电信技术与计算机网络技术的一种新型应用。VoIP电话在传输时将信号压缩后封装成IP包，在IP网络上传输，这种传输方式存在着各种安全隐患。讨论了VoIP电话多种可能存在的安全问题，并就这些安全问题作了详细的分析，同时提出了防护措施，以最大限度地保障VoIP电话的安全。     

Electrolyte/Structure?Dependent Cocktail Mediation Enabling High?Rate/Low?Plateau Metal Sulfide Anodes for Sodium Storage

As promising anodes for sodium-ion batteries, metal sulfides ubiquitously suffer from low-rate and high-plateau issues, greatly hindering their application in f...     

基于LC谐振电路的智能配送无人机设计

针对传统配送机器人在配送过程中出现的路径偏差,与顾客发生碰撞等问题,设计了一种基于电磁循迹的配送无人机.使用四轴飞行器作为主体,利用LC谐振电路作为传感器检测电磁信号,进行路径跟踪,避免了周围环境对配送无人机循迹过程的影响.无人机采用基于四元数的姿态解算算法进行姿态解算,并通过改进的串级模糊PID控制算法控制无人机的飞行速度和方向,提高了配送无人机的响应速度和稳定性,无人机能够更好的完成配送任务,具有应用和推广价值.     

基于GPRS的风电并网稳定控制系统

研究了风电场并网存在的稳定问题,针对风电场通信通道的特殊性,研制了基于GPRS的风电场并网稳定控制系统,实现了风电并网的有功潮流和无功电压的综合自动控制.系统应用GPRS实现了如下通信功能:数据缓冲功能、心跳报文功能、自动重拨功能、数据标识功能、软硬件看门狗功能.该系统的主要功能包括:过载切机;低压切机;高频切机;系统运行状态接近稳定极限时,若风机出力波动幅度持续较大,切除风电机组;根据系统关键断面潮流的情况实时调整风机出力的上限;依据风电场并网节点母线电压水平,控制风电场无功补偿设备的投切.最后,介绍了风电场并网稳定控制系统在阜新电网的应用.     

600MW机组QMA型油枪着火不稳定改进

针对2093t/h上海锅炉配置的FORNEY公司QMA型油枪,在神华国华锦界电厂生产运行阶段暴露出的冷态点不着、热态不稳定等问题,查明原因并进行合理改造,运行效果良好。     

Synthesis and characterization of La2Ti2O7 employed for photocatalytic degradation of reactive red 22 dyestuff in aqueous solution

Perovskite structured La₂Ti₂O₇ catalyst prepared by polymerized complex method was characterized and examined the photocatalytic activity by decomposing an azo dyestuff, Reactive Red 22, in aqueous solutions under UV irradiation. La₂Ti₂O₇ powders prepared by polymerized complex method exhibit higher surface areas, better homogeneity and are more sensitive to solution than those prepared by solid-state method. The first derivatives of UV–vis DRS patterns confirmed the complete crystallization of La₂Ti₂O₇ sintered at temperatures higher than 900 °C. The effects of sintering temperature of catalyst and solution pH of photocatalytic reaction were studied. The photocatalytic decomposition of Reactive Red 22 per unit surface area was found to be higher for experiments using La₂Ti₂O₇ than using TiO₂. However, the electron–hole recombination was found to be more obvious for La₂Ti₂O₇ than for TiO₂ because the network of metal cations constructed within La₂Ti₂O₇ enhances the mobility of photogenerated electrons and holes.     

Study on Microstructure and Mechanical Properties of Hot Rolled Low Silicon Containing Phosphorus TRIP Steel

The effects of final air cooling temperature on the microstructure and mechanical properties of hot rolled 0.2C-1.9Mn-0.5Si-0.08P TRIP steel were studied by utilizing OM, SEM, TEM and tensile tests. Experimental results showed that in the multiphase microstructure of the investigated steel when the finish rolling temperature was about 820 ℃ and the final air cooling temperature was in the range of 630-700 ℃, the grain size of most of ferrite was finer (about 4 μm) and which had higher dislocation density, t...     

Progress in Thermal Contact Resistance

The developments of aeronautics and astronautics require engines of higher quality. The temperature distribution in combustion engine is highly influenced by the thermal conduct resistance. To predict the temperature field of the hot-end assemblies of combustion engine, the thermal contact resistance must be considered. The object of the study is to propose a model of high application including in conditions of high temperature and high pressure. Up to date, many models and empirical or semi-empirical corre...