Localization via ultra-wideband radios: a look at positioning aspects for future sensor networks

UWB technology provides an excellent means for wireless positioning due to its high resolution capability in the time domain. Its ability to resolve multipath components makes it possible to obtain accurate location estimates without the need for complex estimation algorithms. In this article, theoretical limits for TOA estimation and TOA-based location estimation for UWB systems have been considered. Due to the complexity of the optimal schemes, suboptimal but practical alternatives have been emphasized. Performance limits for hybrid TOA/SS and TDOA/SS schemes have also been considered. Although the fundamental mechanisms for localization, including AOA-, TOA-, TDOA-, and SS-based methods, apply to all radio air interface, some positioning techniques are favored by UWB-based systems using ultrawide bandwidths.     

黄金矿山综合经济效益的灰色评估

本文偿试性地应用灰色系统理论中的灰色聚类评估模型,对山东省七个黄金矿山的综合经济效益进行了评价,得出了山东省黄金矿山的综合经济效益较好的合理结论。     

Traffic grooming on WDM rings using optical burst transport

A sublambda traffic-grooming scheme on wavelength-division-multiplexed (WDM) rings, which is called optical burst transport (OBT), is proposed. The network protocol and architecture allow increased flexibility to tailor the transport network behavior for efficient delivery of bursty data traffic. Using different network parameters, its performance is analyzed via simulation, and the implementation issues including the media-access-control (MAC) protocol, tunable-filter controller, and burst-mode receiver are addressed. Finally, the feasibility of the OBT with an experimental testbed built by the authors is demonstrated and a streaming-video application is used to present its overall functionality.     

D1100-11型造气鼓风机技术改造

针对国内采用煤制气工艺的部分中氮肥生产厂发生的造气鼓风机出力不足的现象，根据不同的系统工作状况对原风机的叶轮进行重新设计施工，不改变机组其余部分，以起到增压扩容的效果，从而实现增产降耗的目的。     

短纤维增强透气性莫来石/铁(A3S2/Fe)复合材料烧结特性的研究

本文研究了A₃S₂/Fe复合材料的烧结特性、透气性和纤维增强效果,分析了烧结过程中材料宏观结构和微观组织的形成机理.实验结果表明:纤维增强A₃S₂/Fe复合材料在900～1000℃具有良好的烧结性能,烧成后表层存在一定厚度的硬化层;纤维增强效果显着.材料抗压强度达17～23MPa,相对透气系数为4.30～9.69cm3/(cm2·s·atm).已能满足实际应用的需要.     

Tearing, folding and deformation of a carbon-carbon sp-bonded network

A monolayer and a few layers of carbon sp²-bonded networks were torn and folded by the tip of an atomic force microscope at the steps on newly cleaved highly oriented pyrolytic graphite. It was found that the preferential breaking directions and folding axes are along the symmetry directions of the graphite hexagonal structure. Depending on the force exerted by the tip, breaking may occur along other directions. The torn part of the graphene sheet can even be stretched and deformed, and does not resume its original shape after release from the tip.     

光纤Bragg光栅监测钢筋混凝土结构应变的实验研究

研究了光纤Bragg光栅在钢筋混凝土结构应变监测中的应用。对其应变、温度灵敏系数进行标定,将其埋设在钢筋混凝土梁内,实现对结构内部应变的监测,并对其工作状态做出评价。实验结果与理论值、传统监测手段监测结果一致。研制出一种钢管封装Bragg光栅温度传感器监测温度,对光纤Bragg光栅的应变与温度的同时测量进行了研究。     

悬浮床加氢裂化油溶性催化剂与沥青质的作用

在高压釜反应器中对添加了油溶性 Ni 催化剂(UPC-O)和水溶性 Ni 催化剂(UPC-W)的辽河稠油常压渣油(LHAR)进行了悬浮床加氢裂化实验。通过元素分析和傅里叶变换红外光谱(FTIR)分析对抑制反应生焦效果好的 UPC-O 与 LHAR 沥青质的作用进行了研究。元素分析结果显示,在 LHAR 中加入 UPC-O1000μg/g,沥青质和脱沥青质油中 Ni 含量分别出476μg/g和110μg/g 增加到7 559μg/g 和1 024μg/g,表明 UPC-O 在沥青质中有富集的趋势。FTIR 表征结果显示,UPC-O 和沥青质发生了相互作用。UPC-O 可在沥青质原位硫化为活性组分,对沥青质在悬浮床加氢裂化反应中的缩合起到好的抑制作用。