污泥中总磷测定方法的探讨

污泥样品与氢氧化钠熔融,使污泥中含磷有机化合物全部转化为可溶性的正磷酸盐,然后测定污泥中的总磷含量.此方法方便易行,平行性好,准确度高,可作为测定污泥中总磷的标准方法.     

发酵工厂中空气净化工艺的合理选择

从节能、降低成本、优化工艺的角度，对无菌空气制备过程中，空气预处理流程的选择、空气净化设备、过滤介质以及设备的遴选进行探讨，以实现工艺和工程设计的优化结合。     

Obtaining high-alumina cement at the semiluksk refractories factory

Conclusions We demonstrate that it is, in principle, possible to obtain refractory high-alumina cement on industrial equipment at the Semiluksk refractories factory. Technological parameters were developed for preparing raw mixtures, pressing the green articles and firing in a tunnel kiln. It was established that the mass percentage of SiO₂ in the raw mixture should not exceed 1.5%. For industrial production of high-alumina cement in department No. 1 it is necessary to implement measures on the mechanization of the production process.Translated from Ogneupory, No. 5, pp. 26–28, May, 1986.     

基于排列熵和支持向量机的癫痫发作预测研究

针对癫痫发作给病人带来的巨大伤害,为临床治疗留下足够空余时间,提出一个可以预测癫痫发作的系统模型。对21名癫痫病人进行研究,提取具有较低算法复杂度的排列熵构成特征向量,将其输入支持向量机（support vector machine,SVM）训练出学习模型,用来识别发作期样本,利用投票机制充分考虑病人差异来判断所处状态,最终实现癫痫的实时预测。结果表明,其中81%的发作可以提前平均50多分钟预测到,且具有较低的误报率。为癫痫发作预测系统的理论研究打下坚实基础。     

A203型低温氨合成催化剂使用小结

对Ａ２０３型低温氨合成催化剂的使用进行总结，介绍了该催化剂的装填，升温还原情况及使用效果。     

Irradiation of poly(vinyl chloride) with H2 plasma. II

Poly(vinyl chloride) films blended with plasticizers, stabilizers, and fillers are irradiated with a beam of H₂ plasma. The polymer partially loses its solubility in cyclohexanone. The viscosity of the soluble part decreases in the initial stages and then increases on further irradiation. Crosslinking was followed by dehydrochlorination and discoloration of the polymer. The electrical conductivity was measured as a function of the irradiation dose and time. The plasticizers enhanced the action of plasma while the stabilizers and fillers reduced it.     

农作物秸秆增强氟石膏复合材料的微观结构研究

将玉米秸秆加入改性后的氟石膏中，研究改性剂、玉米秸秆对氟石膏复合材料结构性能的影响；并用苯丙乳液对玉米秸秆纤维进行表面处理，用以改善基体材料和增强材料的界面结合状况，由此显著提高制品性能。     

The manufacture of lightweight,heat-insulating refractory goods with an operating temperature up to 1750°C

Conclusions The possibility is shown of obtaining lightweight refractories with an operational temperature of 1750°C and having a wide range of properties. The use of these refractories depends on the particular requirements and the conditions of service.Translated from Ogneupory, No. 3, pp. 24–28, March, 1986.     

Infrared spectroscopic investigation of tannins

Infrared spectroscopy is suggested as a diagnostic method for the characterisation and qualitative estimation of the two classes of tannins. Gallic acid, tannic acid and chebulinic acid have been taken as model compounds for the hydrolysable and catechin for the condensed tannins. The former class is marked by the presence of strong absorption maxima at 1710 – 35 cm^?1. The two classes have characteristic pattern of absorption, from which it is possible to characterise the particular type of tannin.     

Metal recovery in a pilot-scale rotating cylindrical wiper-blade electrode system

The performance of an experimental pilot-scale electrochemical reactor using a rotating cylindrical electrode equipped with wiper blades is described. Data obtained from monopolar depositing and bipolar stripping—depositing of copper from dilute aqueous electrolytes are presented and certain economic aspects of metal recovery are discussed.