Synthesis,extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymer

Novel calix[4]arene‐poly(ethylene glycol) crosslinked polymer (CCP) has been synthesized by the polycondensation reaction between a p‐tert‐butylcalix[4]arene derivative and dihydroxyl capped poly(ethylene glycol) (DHPEG, M_n = 1000) catalyzed by neodymium tosylate. The hydrogel, consisted of 66.9% water and 33.1% CCP, can selectively extract aromatic organic molecules from aqueous solution according to the diameter of the guest molecules, which infers that the diameter of the calix[4]arene cavity is about 5.4 Å and the conformation of calix[4]arene units altered from cone conformation to 1,3‐alternate conformation during the polycondensation reaction. Furthermore, CCP can also adsorb naphthalene from gas phase, showing much higher capacity than active carbon does, which may have some potential applications in the field of separation and environment protection. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dispersion characterization in layered double hydroxide/Nylon 66 nanocomposites using FIB imaging

Layered double hydroxides (LDHs), a newly emerging 2D host material, consist of cationic brucite-like layers and exchangeable interlayer anions. In this work, the morphology and dispersion of LDH particles in LDH/Nylon 66 (salt) nanocomposites has been investigated using focused ion beam (FIB) techniques, transmission electron microscopy (TEM) and X-ray diffraction (XRD). The FIB images show that LDHs are present in the polymer phase dispersed to different degrees, with partial intercalation, exfoliation, and aggregation all being observed. The most even dispersion was achieved in nanocomposites with the lowest loading (0.5 wt % LDH). Residual tactoids and agglomerates were most common in the samples made with the highest concentration of LDHs studied here (5 wt %). The dispersion observed using FIB was consistent with TEM and XRD analysis, yet this technique had significant benefits in terms of time and simplicity over these “conventional” technologies. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polymer transcrystallinity induced by carbon nanotubes

In this work, we provide the evidence of polymer transcrystallinity in the presence of carbon nanotubes (CNTs). The interfacial morphology of carbon nanotube fiber-polypropylene matrix is investigated by means of polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The supramolecular microstructures of polypropylene transcrystals induced by the nanotube fiber are observed in the range of isothermal crystallization temperatures from 118 °C to 132 °C. The dynamic process of transcrystallization is analyzed by using the theory of heterogeneous nucleation. Microstructure analysis shows that the nanotubes can nucleate the growth of both α- and γ-transcrystal, and α-transcrystals dominate the overall interfacial morphology. Close to the nanotube fiber surface, a cross-hatched lamellar microstructure composed of mother lamellae and daughter lamellae is observed.     

完善管理机制提高校长队伍整体水平

校长是一所学校的指挥者,一名好的校长,可以带出一批训练有素的教师队伍,可以推进学校教育改革的不断发展.抓好校长队伍建设是贯彻党的教育方针,全面推进素质教育,办好学校的头等大事.那么,如何加强校长队伍建设就显得尤为重要了.     

用αβ谱仪测量人工αβ放射性气溶胶体积活度的试验研究

本文介绍了用αβ谱仪系统同时测量αβ谱、实现Ｒｎ／Ｔｈ子体补偿、确定超铀α核素气溶胶体积活度及人工放射性气溶胶总β体积活度的技术途径。利用ＲａＡ、ＲａＣ′ａ峰的二段时间计数可确定空气中ＲａＡ、ＲａＢ、ＲａＣ的气溶胶体积活度，相应的，也能给出ＲａＢ、ＲａＣ对总β计数的贡献。根据一般环境条件下的平衡比，用ＴｈＣ′的。计数修正Ｔｈ子体对αβ测量的影响。￣［２３９］ｐｕ或／和￣［２４１］Ａｍ人工核素的α计数，可通过两段时间分别扣除ＲａＡ、ＲａＣ′拖尾的方法确定；β计数分别扣除Ｒｎ／Ｔｈ子体β贡献即可确定。在本文规定的测量条件下，对室内天然Ｒｎ子体水平在１５Ｂｑ／ｍ￣３以下，超铀α核素气溶胶体积活度的测量下限可达到０．１Ｂｑ／ｍ￣３；即使在７５Ｂｑ／ｍ￣３环境下，人工核素总β的测量下限也可达ｌＢｑ／ｍ￣３以下。     

北京谱仪Ⅱ（BESⅡ）顶点探测器数据获取系统

北京谱仪（ＢＥＳⅡ）顶点探测器数据获取系统是北京谱仪数据获取系统的一部分，该子系统电子学采用快总线标准，本文描述了该系统的硬件结构和软件系统，软件包括快总线系统的微码软件和上层控制软件，该系统的死时间为１．５ｎｓ，对ＢＥＳⅡ系统总死时间的贡献小于０．５ｍｓ。     

Development of temperature compensated high elongation resistance strain gauges for use up to 250°C

The paper describes the development and evaluation of temperature compensated high elongation resistance strain gauges for use from room temperature to 250°C. These gauges could be temperature-compensated on steels with coefficient of thermal expansion α = 11 ppm/°C. Thermal output within 250°C was about 1 μm/m/°C and maximum standard deviation of 5 gauges was 34 μm/m. Strain limit was > 4% at room temperature and at 250°C. Gauge factors of different strain ranges at R.T. and at 250°C are tabulated. Some applications are stated.     

Electron microscopic observations and DNA chain fragmentation studies on apoptosis in bone tumor cells induced by ~(153)Sm-EDTMP

ＥｌｅｃｔｒｏｎｍｉｃｒｏｓｃｏｐｉｃｏｂｓｅｒｖａｔｉｏｎｓａｎｄＤＮＡｃｈａｉｎｆｒａｇｍｅｎｔａｔｉｏｎｓｔｕｄｉｅｓｏｎａｐｏｐｔｏｓｉｓｉｎｂｏｎｅｔｕｍｏｒｃｅｌｓｉｎｄｕｃｅｄｂｙ１５３ＳｍＥＤＴＭＰＺｈｕＳｈｏｕＰｅｎｇ，Ｘｉａ...