Single phase three-level power factor correction circuit with passive lossless snubber

Multilevel conversion techniques, power factor correction (PFC) techniques and soft switching techniques are the three research hot points of power electronics. The paper proposes a single phase three-level PFC circuit with passive lossless snubbers which embodies these trends. Firstly, the three-level buck and boost topologies are derived from one bridge leg of the traditional diode clamped three-level inverters. Then, a single phase three-level PFC circuit is presented based on the three-level boost topology, and the principle and implementation approaches of the three-level PFC circuit are described. To realize the soft switching of the main switches and freewheeling diodes, two passive lossless snubber cells are added to the circuit. The operating principle and design considerations of the new circuit are discussed in detail. Finally, a 2 kW prototype of the single phase three-level PFC with the passive lossless snubber is built and tested. The simulated and experimental results indicate that the proposed circuit can realize the function of three-level PFC, increase system efficiency and have no over-voltage stresses on main power switches. Moreover, the power factor of the proposed circuit with the passive lossless snubber is higher than that of the circuit without the snubber.     

主动偏差算法在电路容差设计中的应用

电路元器件的参数漂移是影响系统稳定性的主要原因之一,因此电子系统的容差设计显得尤为重要,本文研究了运用进化的方法进行电路的容差设计。传统方法所设计的容差电路因容差范围小而影响电路的容差性能。本文将遗传规划与主动偏差思想相结合,提出基于主动偏差的混合GP算法--AD-Based HGP,使用该方法进行电路容差设计可以有效提高电路的容差范围。实验结果表明运用本文方法设计出的电路与传统方法的设计结果相比,本文方法所进化出的电路具有更强的容差性能,体现了该算法在容差设计上的优势与潜能。     

红外遥控倒计时器的设计与实现

简要介绍了红外遥控的原理以及红外信号编/解码方法,设计并实现了一种可通过红外信号遥控的倒计时器.该设计以8位单片机AT89C2051为核心,利用普通家电遥控器和红外接收头HS0038实现红外信号的发送和接收,一次性可编程语音芯片API840N用于产生提示语音,完成的倒计时器具有设计简洁、计时精度高、操作方便等优点.     

医用电气设备的安全设计

根据GB9706.1-1995要求,提出医疗电气设备设计中经常出现的一些问题,包括电击危险的防护、剩余电压和电磁兼容、机械危险防护、超温和其他安全方面危险的防护、工作数据的准确性和对不正确输出的防止、不正常的运行和故障状态等方面,并提供了一些相关的方法和建议。     

图像垃圾邮件的发展和防范

垃圾邮件一直困扰着人们,图像垃圾邮件是垃圾邮件的变种,其危害远远大于传统的文本类垃圾邮件.本文首先给出了图像垃圾邮件的定义,介绍了图像垃圾邮件的类型和特点,然后分析了图像垃圾邮件的演进过程,总结了图像垃圾邮件的构造方法,最后探讨了图像垃圾邮件的防范措施.     

基于激光散射的高速微粒测速系统

高速微粒速度测量技术是空间高速粒子地基模拟系统中的一项关键技术。设计并实现了一种利用激光光幕对高速运动微粒的非接触式速度测量系统,分析了测量误差以及进一步提高测量精度的方法。该系统以高功率半导体激光器作为光源,同时采用PIN光电二极管作为光电探测器,利用接收侧向散射光脉冲作为起始和结束信号以测量微粒的平均速度。实验结果表明,该系统可对速度范围为1~10 km/s,直径大于100μm的高速微粒进行测速,精度优于1.8%。     

钒氮合金对激光熔覆钴基合金涂层组织和耐磨性的影响

利用5 kW CO2连续激光,在低碳钢表面熔覆钴基合金和添加钒氮合金的钴基合金涂层.采用光学显微镜(OP)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和X射线衍射仪(XRD)研究了熔覆层的显微组织和相结构;利用显微硬度计及滑动磨损试验机测试了熔覆层的硬度和抗磨损性能.结果表明,Co基合金涂层主要组成相为γ-Co与碳化物Cr23C6;加入钒氮合金后,出现了σ-FeV和VN等相,涂层凝固组织明显细化,熔覆层硬度提高,凡界面处硬度均比表层高;熔覆层的耐磨性随钒氮合金的加入及激光扫描速度的增加而提高,同时对熔覆层的磨损机制进行了分析.     

Dilation-run wavelet image coding

The run-length coding and the morphological representation are two classical schemes for wavelet image coding. The run-length coders have the advantage of simplicity by recording the lengths of zero-runs between significant wavelet coefficients but at the expense of yielding an inferior rate-distortion performance. The morphology-based coders, on the other hand, utilize the morphological dilation operation to delineate the clusters of significant coefficients for improving coding performance. In this paper, a novel dilation-run image coding algorithm is developed by taking the advantages of both schemes, in which the clustered significant coefficients are extracted by using the morphological dilation operation and the insignificant coefficients between the extracted clusters are coded by using the run-length coding method. The proposed dilation-run image coder is implemented in the framework of bitplane coding for producing embedded bitstreams. Compared with several state-of-the-art wavelet image coding methods, the proposed dilation-run image coding method achieves comparable rate-distortion coding performance, especially more attractive for fingerprint type of imageries.     

一种具有750mA输出电流,双模式PWM/PFM控制的高效率直流-直流降压转换器

提出了一种输出电流可达750mA,脉宽调制（PWM）和变频调制（PFM）双模式控制的,高效率、高稳定性直流-直流降压转换器.该转换器在负载电流大于80mA时,采用开关频率为1MHz的PWM工作模式;在负载电流小于80mA时,采用开关频率减小和静态电流降低的PFM工作模式,实现了在整个负载电流变化范围（0.02~750mA）内,转换器均保持高效率.而且采用一种快速响应的电压模式控制结构,达到了优异的线性和负载调整特性.芯片采用CSMC公司0.5μm CMOS 2P3M混合信号工艺物理实现.测试结果表明,该电路可根据负载的变化在PWM和PFM模式下自动切换.最大转换效率达96.5%;当负载电流为0.02mA时,转换效率大于55%.该芯片特别适合电池供电的移动系统使用.     

非掺杂对称双栅的基于完整表面电势的核心模型

通过求解Poisson方程自洽地得到了表面电势随沟道电压的变化关系,从而推出了非掺杂对称双栅MOSFET的一个基于表面势的模型. 通过Pao-Sah积分得到了漏电流的表达式. 该模型由一组表面势方程组成,解析形式的漏电流可以通过源端和漏端的电势得到. 结果标明该模型在双栅MOSFET的所有工作区域都成立,而且不需要任何简化(如应用薄层电荷近似)和辅助拟合函数. 对不同工作条件和不同尺寸器件的二维数值模拟与模型的比较进一步验证了提出模型的精度.