A General Ammonium Salt Assisted Synthesis Strategy for Cr3+-Doped Hexafluorides with Highly Efficient Near Infrared Emissions

The discovery of highly efficient broadband near infrared (NIR) emission material is urgent and crucial for constructing NIR lighting sources and emerging applications. Herein, a series of NIR emission hexafluorides A₂BMF₆:Cr³⁺ (A = Na, K, Rb, Cs; B = Li, Na, K, Cs; M = Al, Ga, Sc, In) peaking at ≈733–801 nm with a full width at half maximum (FWHM) of ≈98–115 nm are synthesized by a general ammonium salt assisted synthesis strategy. Benefiting from the pre-ammoniation of the trivalent metal sources, the Cr³⁺ can be more efficiently doped into the A₂BMF₆ and simultaneously prevent the generation of the competitive phase. Particularly, Na₃ScF₆:Cr³⁺ (λ_em = 774 nm, FWHM ≈ 108 nm) with optimal Cr³⁺-doping concentration of 35.96% shows a high internal quantum efficiency of 91.5% and an external quantum efficiency of ≈40.82%. A lighting emitting diode (LED) device with a NIR output power of ≈291.05 mW at 100 mA driven current and high photoelectric conversion efficiency of 20.94% is fabricated. The general synthesis strategy opens up new avenues for the exploration of Cr³⁺-doped high efficiency phosphors, and the as-obtained record NIR output power demonstrates for NIR LED lighting sources applications.     

High-Performance Solution-Processed Nondoped Circularly Polarized OLEDs with Chiral Triptycene Scaffold-Based TADF Emitters Realizing Over 20% External Quantum Efficiency

Recently, circularly polarized organic light-emitting diodes (CP-OLEDs) fabricated with thermally activated delayed fluorescence (TADF) emitters are developed rapidly. However, most devices are fabricated by vacuum deposition technology, and developing efficient solution-processed CP-OLEDs, especially nondoped devices, is still a challenge. Herein, a pair of triptycene-based enantiomers, (S,S)-/(R,R)-TpAc-TRZ, are synthesized. The novel chiral triptycene scaffold of enantiomers avoids their intermolecular π–π stacking, which is conducive to their aggregation-induced emission characteristics and high photoluminescence quantum yield of 85% in the solid state. Moreover, the triptycene-based enantiomers exhibit efficient TADF activities with a small singlet-triplet energy gap (ΔE_ST) of 0.03 eV and delayed fluorescence lifetime of 1.1 µs, as well as intense circularly polarized luminescence with dissymmetry factors (|g_PL|) of about 1.9 × 10⁻³. The solution-processed nondoped CP-OLEDs based on (S,S)-/(R,R)-TpAc-TRZ not only display obvious circularly polarized electroluminescence signals with g_EL values of +1.5 × 10⁻³ and −2.0 × 10⁻³, respectively, but also achieve high efficiencies with external quantum, current, and power efficiency up to 25.5%, 88.6 cd A⁻¹, and 95.9 lm W⁻¹, respectively.     

Balancing Intermolecular Interactions between Acceptors and Donor/Acceptor for Efficient Organic Photovoltaics

Promoted by uninterrupted materials and device innovation, organic solar cells have achieved impressive development. However, the complicated intermolecular interactions inside active layers are less understood. Herein, the intermolecular interactions are studied from the dual perspectives of acceptor/acceptor (A/A) and donor/acceptor (D/A), and how these interactions synergistically control the final efficiencies. Three small molecular acceptors (SMAs) are designed with different end-caps, which manipulate the crystallinity and electrostatic potential (ESP) distributions of acceptors, and accordingly, the A/A and D/A intermolecular interactions. The results show that SMA LA17 with low A/A interactions exhibits inferior performance around 12%, owing to its strong D/A interaction with donor PM6, which shapes too miscible morphology and increases charge recombination. Instead, LA16 with strong A/A interactions and moderate D/A interactions delivers improved bulk-heterojunction (BHJ) networks, and therefore, enhances charge transport and diminishes geminate or trap-assisted charge recombination. Consequently, PM6:LA16 records the competitive efficiency of up to 13.74% among the three systems. Therefore, this study deepens the synergistic or balancing effect of the D/A and A/A interactions on BHJ blends for efficient organic solar cells.     

一种基于C-RAN架构的LTE网络能效获取方法

提供了一种从单位流量能耗视角的LTE网络能效获取方法,弥补了现有技术不能对C-RAN架构下各网络子单元分别测算能效的不足。该方法包括收集流量清单和能耗清单,根据预设标记与过滤规则分别采集并上报无线网络中各网络子单元的实时流量和实时能耗。最后,根据流量清单、能耗清单以及预设时隙,获取各网络子单元和/或无线网络的能效。     

Ultra‐Broadband Wide‐Angle Terahertz Absorption Properties of 3D Graphene Foam

As a next generation of detection technology, terahertz technology is very promising. In this work, a highly efficient terahertz wave absorber based on 3D graphene foam (3DG) is first reported. Excellent terahertz absorption property at frequency ranging from 0.1 to 1.2 THz is obtained owing to faint surface reflection and enormous internal absorption. By precise control of the constant properties for 3DG, the reflection loss (RL) value of 19 dB is acquired and the qualified frequency bandwidth (with RL value over 10 dB) covers 95% of the entire measured bandwidth at normal incidence, which far surpasses most reported materials. More importantly, the terahertz absorption performance of 3DG enhances obviously with increasing the incidence while majority of materials become invalid at oblique incidence, instead. At the incidence of 45°, the maximum RL value increases 50% from 19 to 28.6 dB and the qualified frequency bandwidth covers 100% of the measured bandwidth. After considering all core indicators involving density, qualified bandwidth, and RL values, the specific average terahertz absorption (SATA) property is investigated. The SATA value of 3DG is over 3000 times higher than those of other materials in open literatures.     

Simultaneous Activation of Short‐Wave Infrared (SWIR) Light and Paramagnetism by a Functionalized Shell for High Penetration and Spatial Resolution Theranostics

Nanoparticle emitting short‐wave infrared (SWIR) light has received increased attention in the molecular imaging field due to its deeper tissue penetration, fast imaging, high sensitivity, and resolution. The simultaneously activated SWIR excited directly by an 808 nm laser and T₁‐weighted magnetic resonance imaging (MRI) signal are found in one single‐shell nanoparticle NaErF₄@NaGdF₄ (Er@Gd), which is used as a dual‐modality imaging contrast agent in vivo to accurately determine the position of tumors. The conjugated cypate is then aggregated on the surface of Er@Gd@SiO₂‐Cy/bovine serum albumin. With the guidance of dual modality imaging, photothermal therapy is effectively used to ablate tumors in a mouse model. The design of single‐shell nanomaterial activation of SWIR imaging and MRI signals is expected to provide a new strategy for high penetration and spatial resolution cancer theranostics.     

Robust Fabrication of Nonstick,Noncorrosive, Conductive Graphene‐Coated Liquid Metal Droplets for Droplet‐Based,Floating Electrodes

Nontoxic liquid metals (conductive materials in a liquid state at room temperature) are an emerging class of materials for applications ranging from soft electronics and robotics to medical therapy and energy devices. Their sticky and corrosive properties, however, are becoming more of a critical concern for circuits and devices containing other metals as these are easily destroyed or contaminated by the liquid metals. Herein, a feasible method for fabricating highly conductive graphene‐coated liquid metal (GLM) droplets is reported and their application as nonstick, noncorrosive, movable, soft contacts for electrical circuits is demonstrated. The as‐prepared GLM droplets consist of a liquid‐phase soft core of liquid metal and a slippery outer layer of graphene sheets. These structures address the issue of simultaneous control of the wettability and conductivity of a soft electronic contact by combining extraordinary properties, i.e., nonstick, noncorrosive, yet exhibiting high electronic conductivity while in contact with metal substrates, e.g., Au, Cu, Ag, and Ni. As proof‐of‐concept, the as‐prepared GLM droplets are demonstrated as floating electrodes for movable, recyclable electronic soft contacts in electrical circuits.     

Core–Satellite Mesoporous Silica–Gold Nanotheranostics for Biological Stimuli Triggered Multimodal Cancer Therapy

A core–satellite nanotheranostic agent with pH‐dependent photothermal properties, pH‐triggered drug release, and H₂O₂‐induced catalytic generation of radical medicine is fabricated to give a selective and effective tumor medicine with three modes of action. The nanocomplex (core–satellite mesoporous silica–gold nanocomposite) consists of amino‐group‐functionalized mesoporous silica nanoparticles (MSN‐NH₂) linked to L‐cysteine‐derivatized gold nanoparticles (AuNPs‐Cys) with bridging ferrous iron (Fe²⁺) ions. The AuNPs‐Cys serve as both removable caps that control drug release (doxorubicin) and stimuli‐responsive agents for selective photothermal therapy. Drug release and photothermal therapy are initiated by the cleavage of Fe²⁺ coordination bonds at low pH and the spontaneous aggregation of the dissociated AuNPs‐Cys. In addition, the Fe²⁺ is able to catalyze the decomposition of hydrogen peroxide abundant in cancer cells by a Fenton‐like reaction to generate high‐concentration hydroxyl radicals (·OH), which then causes cell damage. This system requires two tumor microenvironment conditions (low pH and considerable amounts of H₂O₂) to trigger the three therapeutic actions. In vivo data from mouse models show that a tumor can be completely inhibited after two weeks of treatment with the combined chemo‐photothermal method; the data directly demonstrate the efficiency of the MSN–Fe–AuNPs for tumor therapy.     

Performance analysis of end-to-end SNR estimators for AF relaying

Many existing signal-to-noise ratio (SNR) estimators were designed and evaluated for conventional one-hop communications systems. However, for a relaying system, it is the end-to-end SNR that determines the system performance. In this paper, we will fill this gap by evaluating the performances of the existing SNR estimators in a dual-hop relaying system used for each hop. The probability density functions of the SNR estimators are first derived, whose parameters are fitted as functions of the sample size and the true value of SNR. Using them, the cumulative distribution functions of the end-to-end SNR and the bit error rate performance for a relaying system are derived. Numerical results show that the squared signal-to-noise variance estimator has the best performance for small SNRs and the second-order fourth-order moments estimator has the best performance for large SNRs, while the signal-to-variation ratio estimator has the worst performance, among the existing SNR estimators, for AF relaying systems.     

An improved proportionate least mean <Emphasis Type="Italic">p</Emphasis>-power algorithm for adaptive filtering

The least mean p-power error criterion has been successfully used in adaptive filtering due to its strong robustness against large outliers. In this paper, we develop a new adaptive filtering algorithm, named the proportionate least mean p-power (PLMP) algorithm, which uses the mean p-power error as the adaptation cost function. Compared with the standard proportionate normalized least mean square algorithm, the PLMP can achieve much better performance in terms of the mean square deviation, especially in the presence of impulsive non-Gaussian noises. The mean and mean square convergence of the proposed algorithm are analyzed, and some related theoretical results are also obtained. Simulation results are presented to verify the effectiveness of our proposed algorithm.