Differences between the isostructural IRMOF-1 and MOCP-L porous adsorbents

Several discrepancies have emerged about the preparation methods of MOF-5 material, one of the adsorbents more studied for hydrogen storage, because different synthesis procedures give rise to apparently isostructural materials but actually having very different textural properties and also showing different hydrogen adsorption capacities. In this work, MOF-5 material has been successfully synthesized according to the two most extended methods, and the respective resulting materials, IRMOF-1 and MOCP-L, have been widely characterized. Powder X-ray diffraction confirmed that MOF-5 is the main crystallized phase obtained in both cases, and that the MOCP-L product contains some ZnO impurities, mainly in the form of segregated crystals that appear preferentially outside the micropores. The presence of ZnO in the MOCP-L material has been also confirmed by other characterization techniques. On the other hand, interpenetrated networks in the MOCP-L material are not significant, appearing in any case at a similar extent than in IRMOF-1; consequently it cannot be considered for explaining the differences observed in the adsorption capacity of both materials. These differences cannot be completely explained simply by the segregated ZnO impurities, so the presence of some ZnO nanocrystals partially blocking the micropores of MOCP-L must be admitted.     

Silver(I) Polymer of Tripodal Amine: Synthesis,Structure and Photoluminescence

Starting from tripodal ligand tris-(methyl-imidazole) amine (1) the colourless complex tris-(methyl-imidazole)aminesilver(I)perchlorate (2) has been synthesized, characterized by IR, UV/Vis and ¹HNMR spectroscopic studies and finally solid state structure has been established by single crystal X-ray diffraction studies. A single crystal X-ray structure determination revealed the formation of coordination polymer. The crystal structure possesses weak d¹⁰–d¹⁰ ‘argentophilic’ interactions with Ag–Ag separation (3.348 Å). The weak luminance at 375 nm may be this Ag–Ag weak interaction. The molecule possesses weak H-bonding with C2 and C4H of imidazole with oxygen of ClO₄.     

<Emphasis Type=Italic>trans</Emphasis>-Fatty Acid Isomers in Adipose Tissue Have Divergent Associations with Adiposity in Humans

The aim of this study was to evaluate the association between adipose tissue trans-fatty acid isomers and adiposity. This cross-sectional study included 1,785 subjects from Costa Rica. Fatty acid concentrations (as a percentage of the total fatty acids) in subcutaneous adipose tissue were assessed by gas–liquid chromatography. Dietary intakes were assessed with a food frequency questionnaire. Multivariate linear regression models were used to relate adipose tissue trans-fatty acid content to BMI, waist circumference, and skinfold thickness while adjusting for age, sex, and area of residence. To account for variations in lifestyle, we adjusted for smoking, physical activity, income, self-reported history of diabetes and hypertension, and for adipose tissue alpha-linolenic acid and energy intake in a third model. After adjustments, positive associations were found between 18:2t-fatty acids (primarily from partially hydrogenated oils) and BMI, waist circumference, and skinfold thickness (P for each association <0.01). Rumenic acid was positively associated with skinfold thickness (P < 0.0001), but not with BMI or waist circumference (P > 0.05). Inverse associations were found between 16:1n-7t-fatty acids and skinfold thickness and between 18:1t-fatty acids and BMI and waist circumference (P < 0.0001). This study suggests that individual trans-fatty acid isomers may have divergent effects on adiposity. 18:2t-fatty acids show consistent positive associations with measures of adiposity. These isomer-specific associations are an interesting new finding. Other prospective and intervention studies are necessary to examine these relationships further.     

Optimization of inverted bulk heterojunction polymer solar cells

We have successively fabricated inverted bulk heterojunction polymer solar cells employing ZnO and MoO₃ as electron and hole selective layers, respectively. The device structure is ITO/ZnO/P3HT: PCBM/MoO₃/Al. Differently from conventional polymer solar cells, ITO and Al work as electron and hole collecting electrodes in this inverted structure, respectively. We have found the optimal thickness of ZnO and MoO₃ to be 100 nm and 5 nm, respectively. The highest PCE was obtained to be 3.32% under AM 1.5 illumination at 1,000W/m², which is the highest PCE of inverted solar cells reported previously in the literature.     

The optimal composition of the filter-media for coping with daily flow-rate fluctuation

The fluctuation of inlet flow in a water treatment plant can change the filtration rate abruptly and ultimately reduce the filtration performance by leaking the detained particles in filter media. The surface wave, occurring in the intake well by the fluctuation of inlet flow, reaches the filtration process in a very short time (about 10 minutes), which makes it impossible to control the filtration rate stably. In this study the authors evaluated the effect of daily flow-rate fluctuation on the performance of sand filtration process, and the dual media composition was proposed to improve the filtration performance. Comparative column tests were carried out for the various dual media, such as sand and anthracite compositions. From the results of column tests, dual media with the composition of sand 45 cm and anthracite 30 cm is more effective than the single media with sand in filtration process. In addition, irrespective of dual media composition, the managing ability to cope with that fluctuation tends to be weak at the end of allowable filtration duration time.     

Effect of synthesis condition and annealing on the sensitivity and stability of gas sensors made of Zn-doped <Emphasis Type=Italic>γ</Emphasis>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> particles

Gas sensors made of flame-synthesized Zn-doped γ-Fe₂O₃ nanoparticles were found to have high sensitivity and high aging resistance. Zinc-doped γ-Fe₂O₃ nanoparticles and microparticles were synthesized by flame spray pyrolysis (FSP). Gas sensors were fabricated with as-synthesized particles, and with particles that had been annealed. The sensors’ response to acetone vapor and H₂ was measured as fabricated, and measured again after the sensors were aged for three days. The sensors made from as-synthesized particles showed a gas sensing sensitivity 20 times higher than the literature value. However, sensors made of microparticles lost their sensing ability after three days of aging; sensors made of nanoparticles retained their gas sensing capability after aging. Sensors made of annealed particles did not have significant gas sensing capabilities. Analysis using the William and Hall method showed that the microstrains decreased significantly in both H₂/O₂ and H₂/Air flame synthesized particles after annealing. The results showed that sensors made of flame-synthesized particles have much higher sensitivity than sensors made of particles previously reported. Especially, sensors made of flame-synthesized nanoparticles are resistant towards aging. This aging resistance may be attributed to the particles’ ability to retain their microstrains.     

Receptor-Based Fluorescence Polarization Assay to Detect Phthalate Esters in Chinese Spirits

This work developed a fluorescence polarization (FP) assay for detection of phthalate esters (PAEs) in Chinese spirits. A mouse-derived recombinant peroxisome proliferator-activated receptor α ligand binding domain (mPPARα-LBD*) and a fluorescent-labeled fatty acid (C4-BODIPY-C9) were employed as recognition element and fluorescent tracer, respectively, providing the limits of detection (LODs) below 11.2 μM for the 10 PAEs tested in buffer. Chinese spirits spiked with DEHP and DBP could be positively detected in combination with simple pretreatment, with recoveries ranging from 76.9 to 87.0 % and with coefficients of variation below 10 %. Additionally, the mechanisms of mPPARα-LBD* binding to PAEs were investigated by using molecular simulation approach. The results suggested that the proposed method was reliable for monitoring PAEs in Chinese spirits.     

Minimization of free radical damage by metal catalysis of multivitamin/multimineral supplements

Multivitamin/multimineral complexes are the most common dietary supplements. Unlike minerals in foods that are incorporated in bioorganic structures, minerals in dietary supplements are typically in an inorganic form. These minerals can catalyze the generation of free radicals, thereby oxidizing antioxidants during digestion. Here we examine the ability of a matrix consisting of an amino acid and non-digestible oligosaccharide (AAOS) to blunt metal-catalyzed oxidations. Monitoring of ascorbate radical generated by copper shows that ascorbate is oxidized more slowly with the AAOS matrix than with copper sulfate. Measurement of the rate of oxidation of ascorbic acid and Trolox^® by catalytic metals confirmed the ability of AAOS to slow these oxidations. Similar results were observed with iron-catalyzed formation of hydroxyl radicals. When compared to traditional forms of minerals used in supplements, we conclude that the oxidative loss of antioxidants in solution at physiological pH is much slower when AAOS is present.