Photonic Side-Channel Analysis of Arbiter PUFs

As intended by its name, physically unclonable functions (PUFs) are considered as an ultimate solution to deal with insecure storage, hardware counterfeiting, and many other security problems. However, many different successful attacks have already revealed vulnerabilities of certain digital intrinsic PUFs. This paper demonstrates that legacy arbiter PUF and its popular extended versions (i.e., feed-forward and XOR-enhanced) can be completely and linearly characterized by means of photonic emission analysis. Our experimental setup is capable of measuring every PUF internal delay with a resolution of 6 ps. Due to this resolution, we indeed require only the theoretical minimum number of linear independent equations (i.e., physical measurements) to directly solve the underlying inhomogeneous linear system. Moreover, it is not required to know the actual PUF responses for our physical delay extraction. We present our practical results for an arbiter PUF implementation on a complex programmable logic device manufactured with a 180 nm process. Finally, we give an insight into photonic emission analysis of arbiter PUF on smaller chip architectures by performing experiments on a field programmable gate array manufactured with a 60 nm process.     

Complete parameter measurement for MIMO bistatic radar without synchronization

In order to measure the range, angle, and Doppler frequency of the target without any synchronization in the bistatic radar, a novel complete parameter estimation method based on separability of a pair of Linear Frequency Modulation (LFM) signal is presented. The Doppler frequency is measured by the time difference between two peak positions corresponding to the positive and the negative LFM return signal respectively. Direction Of Departures (DODs) and Direction Of Arrivals (DOAs) of the target are estimated by constructing a special eigenmatrix in which the estimated angles can be extracted from the eigenvalue or the eigenvector. The target position can be located in the presence of the estimated DODs, DOAs and the signal delay difference between the echo and the directive wave signal in Multiple Input Multiple Output (MIMO) bistatic radar without any synchronization. The correctness and effectiveness of the proposed method are verified by the computer simulation.     

A Study of Plasma-Cleaned Ag-Plated Cu Leadframe Surfaces

In this study, an Ar plasma was employed to remove the antitarnish layer on Ag-plated Cu leadframe surfaces using various process powers and times. Measurements of the contact angle, field-emission scanning electron microscopy, x-ray photoelectron spectroscopy, and time-of-flight secondary-ion mass spectrometry were employed to characterize both the Ag and Cu surfaces before and after plasma cleaning. The antitarnish layer on the leadframe surfaces was determined to be benzotriazole and/or its derivatives. Low-power and short-duration plasma treatments did not significantly change the Ag and Cu surfaces in terms of their surface morphologies, and such treatments were not able to totally remove the antitarnish layer. In contrast, a high-power and long-duration plasma treatment made the surfaces slightly smoother and was able to remove the antitarnish layer on both Ag and Cu surfaces. However, cross-contaminations were also detected between the Ag and Cu surfaces during the plasma cleaning process. This cross-contamination is due to redeposition of Ag and Cu atoms during the plasma treatment.     

ACAR: Adaptive Connectivity Aware Routing for Vehicular Ad Hoc Networks in City Scenarios

Multi-hop vehicle-to-vehicle communication is useful for supporting many vehicular applications that provide drivers with safety and convenience. Developing multi-hop communication in vehicular ad hoc networks (VANET) is a challenging problem due to the rapidly changing topology and frequent network disconnections, which cause failure or inefficiency in traditional ad hoc routing protocols. We propose an adaptive connectivity aware routing (ACAR) protocol that addresses these problems by adaptively selecting an optimal route with the best network transmission quality based on statistical and real-time density data that are gathered through an on-the-fly density collection process. The protocol consists of two parts: 1) select an optimal route, consisting of road segments, with the best estimated transmission quality, and 2) in each road segment of the chosen route, select the most efficient multi-hop path that will improve the delivery ratio and throughput. The optimal route is selected using our transmission quality model that takes into account vehicle densities and traffic light periods to estimate the probability of network connectivity and data delivery ratio for transmitting packets. Our simulation results show that the proposed ACAR protocol outperforms existing VANET routing protocols in terms of data delivery ratio, throughput and data packet delay. Since the proposed model is not constrained by network densities, the ACAR protocol is suitable for both daytime and nighttime city VANET scenarios.     

Cooperative and Opportunistic Channel Access for Vehicle to Roadside (V2R) Communications

This paper focuses on vehicle to roadside (V2R) communications in vehicular networks based on the IEEE 802.11 DCF MAC protocol. In vehicular networks, roadside units (RSUs) are typically spaced apart along the road and each vehicle can be connected to an RSU only when the vehicle is within its transmission range. Due to the high relative speed between a moving vehicle and a stationary RSU, the residence time of the vehicle within the coverage of each RSU is very short. Thus it is hard for the system to reach a steady state. With multi-hop forwarding, in which a vehicle may be connected to an RSU through relaying over other vehicles, the connection time of each V2R access may be extended. But this is at the expense of introducing wireless interference among vehicles, which may dramatically degrade the system performance. To tackle these challenges, we propose a new mechanism called Proxy-based Vehicle to RSU access (PVR) for V2R communications. This protocol is designed to exploit cooperative and opportunistic forwarding between any two distant RSUs and to emulate back-to-back transmissions within the coverage of an RSU. As a result, it can shorten the access delay by taking advantage of opportunistic forwarding and mitigate the interference problem during the short residence time within the coverage of an RSU. The simulation results show that PVR achieves excellent performance and outperforms all existing solutions for V2R communications in vehicular networks.     

Distributed algorithms for lifetime maximization in sensor networks via Min–Max spanning subgraphs

We consider the problem of static transmission-power assignment for lifetime maximization of a wireless sensor network with stationary nodes operating in a data-gathering scenario. Using a graph-theoretic approach, we propose two distributed algorithms, MLS and BSpan, that construct spanning trees with minimum maximum (minmax) edge cost. MLS is based on computation of minmax-cost paths from a reference node, while BSpan performs a binary search over the range of power levels and exploits the wireless broadcast advantage. We also present a simple distributed method for pruning a graph to its Relative Neighborhood Graph, which reduces the worst-case message complexity of MLS under natural assumptions on the path-loss. In our network simulations both MLS and BSpan significantly outperform the recently proposed Distributed Min–Max Tree algorithm in terms of number of messages required.     

Constant Modulus Algorithm for Cochannel Signal Separation in Non-Gaussian Impulsive Noise Environments

The separation of cochannel signals is of interest in communication community. Some algorithms based on constant modulus (CM) have been previously developed to separate cochannel signals with the assumption of Gaussian channel noise. The mismatches of noise models between the assumed channel noise and the practical noise may occur. These mismatches will inevitably lead the performance of cochannel signals separation to degrade. In this paper the alpha-stable distribution is employed as noise model to simulate impulsive noise occurring in wireless channel. A constant modulus algorithm is proposed to separate the cochannel signals based on fractional lower-order statistics (FLOS). The convergence of the CM array is analyzed. Numerical simulations are presented to verify the accuracy of the analytical results.     

Two-Tier,Scalable and Highly Resilient Key Predistribution Scheme for Location-Aware Wireless Sensor Network Deployments

We propose a probabilistic key predistribution scheme for wireless sensor networks, where keying materials are distributed to sensor nodes for secure communication. We use a two-tier approach in which there are two types of nodes: regular nodes and agent nodes. Agent nodes are more capable than regular nodes. Our node deployment model is zone-based such that the nodes that may end up with closer positions on ground are grouped together. The keying material of nodes that belong to different zones is non-overlapping. However, it is still possible for nodes that belong to different zones to communicate with each other via agent nodes when needed. We give a comparative analysis of our scheme through simulations and show that our scheme provides good connectivity figures at reasonable communication cost by using minimal flooding in key distribution. Moreover, we show that our scheme is scalable such that no extra overhead in incurred in case of increased number of nodes and sensor field size. Most importantly, simulation results show that our scheme is highly resilient to node captures.     

Identification of a class of two CFOA-based sinusoidal RC oscillators

Using a unified representation for a class of the two current-feedback operational amplifier (CFOA) sinusoidal oscillators, new circuits of this type can be systematically discovered. A catalogue of two circuit structures, each structure realizing 18 oscillator circuits, is presented. Moreover, using the RC:CR transformation, additional 18 oscillator circuits can be obtained from each structure. A third structure realizing additional two oscillator circuits is also presented. Some of the circuits enjoy one or more of the following attractive features: use of grounded capacitors, feasibility of absorbing the parasitic components of the CFOAs, availability of a buffered output voltage and orthogonal tuning of the frequency and the startup condition of oscillation. Moreover, it is shown that the use of the Barkhausen criterion for the determination of the startup condition of oscillation and the frequency of oscillation yields inaccurate results with relatively large errors depending on the selected component values. Furthermore, it is shown that using the roots of the characteristic equation of a specific oscillator structure will result in a startup condition that cannot be adjusted without disturbing the frequency of oscillation.     

A power efficient continuous time ΔΣ modulator with 15 MHz bandwidth and 70 dB dynamic range

A state variable block diagram method is given for the realization of universal biquadratic transfer functions employing second-generation current-controlled conveyors (CCCIIs). Using minimum number of passive components and properly adjusting the bias currents of CCCIIs, the proposed circuits can realize all the tunable frequency standard filter functions: high-pass, band-pass, low-pass, notch-pass, and all-pass by choosing appropriate input branches without changing the passive elements. These presented circuits are in current-mode and voltage-mode separately. The non-ideality analyses of these configurations are given. Additionally, a high-order low-pass filter derived from the proposed voltage-mode biquadratic filter is introduced. PSPICE simulation results are included to verify the theory.