虚拟仪器在振动测量系统中的应用

介绍以LabVIEW为软件平台构建的振动测试虚拟仪器系统的硬件组成及软件的设计思想,其中软件是虚拟仪器的核心。通过虚拟面板的演示表明该软件系统能够完成对信号的时域、频域的显示和分析。     

The conductive path in HfO2:first principles study

正The conductive path formed by the interstitial Ag or substitutional Ag in HfO_2 was investigated by using the Vienna ab initio simulation package based on the DFT theory.The calculated results indicated that the ordering of interstitial Ag ions at special positions can form a conductive path,and it cannot form at other positions. The orientation dependence of this conductive path was then investigated.Various types of super cells are also built to study the rupture of the path,which corresponds to some possible "off" states.     

掺铒硫系玻璃光纤的中红外增益特性模拟研究

实验制备了Er3+掺杂质量分数为1%的Ga5Ge20Sb10S65硫系玻璃,测试了其折射率、吸收光谱和荧光光谱,利用Judd-Ofelt和Futchbauer-Ladenburg理论计算了Er3+离子的自发辐射几率、吸收截面和受激发射截面等光谱参数。在综合考虑Er3+离子的交叉弛豫、能量上转换和激发态吸收效应的基础上,应用四能级粒子数速率-光功率传输方程模型,模拟计算了Er3+掺杂Ga5Ge20Sb10S65硫系玻璃光纤的中红外2.74μm波段的增益特性。结果显示,Er3+掺杂硫系玻璃光纤在2.74μm中红外波段具有较高的信号增益和较宽的增益谱,最大增益值和20dB增益带宽分别超过了40dB和200nm,表明其是可用于中红外2.74μm波段宽带放大的理想增益介质。     

Manipulable and Hybridized,Ultralow‐Threshold Lasing in a Plasmonic Laser Using Elliptical InGaN/GaN Nanorods

Manipulating stimulated‐emission light in nanophotonic devices on scales smaller than their emission wavelengths to meet the requirements for optoelectronic integrations is a challenging but important step. Surface plasmon polaritons (SPPs) are one of the most promising candidates for sub‐wavelength optical confinement. In this study, based on the principle of surface plasmon amplification by the stimulated emission of radiation (SPASER), III‐Nitride‐based plasmonic nanolaser with hybrid metal–oxide–semiconductor (MOS) structures is designed. Using geometrically elliptical nanostructures fabricated by nanoimprint lithography, elliptical nanolasers able to demonstrate single‐mode and multimode lasing with an optical pumping power density as low as 0.3 kW cm^?2 at room temperature and a quality Q factor of up to 123 at a wavelength of ≈490 nm are achieved. The ultralow lasing threshold is attributed to the SPP‐coupling‐induced strong electric‐field‐confinement in the elliptical MOS structures. In accordance with the theoretical and experimental results, the size and shape of the nanorod are the keys for manipulating hybridization of the plasmonic and photonic lasing modes in the SPASER. This finding provides innovative insight that will contribute to realizing a new generation of optoelectronic and information devices.     

Metal‐Organic Frameworks Derived Nanotube of Nickel–Cobalt Bimetal Phosphides as Highly Efficient Electrocatalysts for Overall Water Splitting

The design of highly efficient, stable, and noble‐metal‐free bifunctional electrocatalysts for overall water splitting is critical but challenging. Herein, a facile and controllable synthesis strategy for nickel–cobalt bimetal phosphide nanotubes as highly efficient electrocatalysts for overall water splitting via low‐temperature phosphorization from a bimetallic metal‐organic framework (MOF‐74) precursor is reported. By optimizing the molar ratio of Co/Ni atoms in MOF‐74, a series of Cox Niy P catalysts are synthesized, and the obtained Co4Ni1P has a rare form of nanotubes that possess similar morphology to the MOF precursor and exhibit perfect dispersal of the active sites. The nanotubes show remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic performance in an alkaline electrolyte, affording a current density of 10 mA cm^?2 at overpotentials of 129 mV for HER and 245 mV for OER, respectively. An electrolyzer with Co4Ni1P nanotubes as both the cathode and anode catalyst in alkaline solutions achieves a current density of 10 mA cm^?2 at a voltage of 1.59 V, which is comparable to the integrated Pt/C and RuO₂ counterparts and ranks among the best of the metal‐phosphide electrocatalysts reported to date.     

分布式紧耦合虚拟专用网可靠性计算方法

为了评估构建在互联网络基础上,具有多个服务质量约束要求的分布式紧耦合虚拟专用网可靠性能,该文提出一套可靠性指标计算方法。首先,在赋有权值参数的互联网络中,计算出所有满足约束条件的分布式紧耦合节点之间路由。然后,根据这些路由建立满足服务质量要求的网络邻接矩阵,对邻接矩阵进行分解与整合等变换,求得满足约束条件的不交化网络状态集。最后,根据不交化网络状态集得到可靠性指标的计算式,进而完成可靠性指标计算。由于所有过程都实现了代数化或逻辑代数化计算,所以易于计算机编程实现。论述了算法关键环节的正确性。通过算例、实验以及与传统算法结果比较等方式,说明新算法能够非常贴切地反映出分布式紧耦合虚拟专用网的可靠性。     

合成孔径雷达二维余弦调相转发干扰研究

该文提出一种新的SAR干扰方法：二维余弦调相转发干扰。该方法通过转发调制了余弦相位的SAR信号,使得SAR回波在距离向频域和方位向多普勒域成对扩展,实现了对SAR的多假目标干扰。理论研究表明,该干扰样式为二维相干干扰,能量利用率高,同时又具有非相干干扰的压制特点,通过优化设置干扰调制参数,可以形成紧凑的面假目标或网格状假目标串,达到掩护分布式目标的目的。仿真实验和基于实测数据的仿真验证了该方法的有效性。     

Ultrasmall Thermally Tunable Microring Resonator With a Submicrometer Heater on Si Nanowires

An ultracompact widely tunable thermooptical (TO) microring resonator (MRR) filter based on Si nanowires is presented. The Si nanowire waveguide has a insulator, Si core, a up-cladding, and a thin metal film at the top. The metal circuit along the microring is used as a submicrometer heater which has the same width as the Si nanowire waveguide. The up-cladding is optimized to reduce the light absorption of the metal as well as to have a good heat-conduction from the heater to the Si core. Two pads used as the contact points for the probes connecting to the electrical power are perpendicularly connected to the microring by using optimized T-junctions (with a low excess loss of about 0.06 dB per T-junction). With such a design, the present thermally tunable microring resonator (MRR) can be fabricated by using a standard fabrication process with a single lithography process, which is much simpler than the fabrication with double lithography processes used for the conventional TO components. Finally, the simulation results show that the designed MRR has a wide tuning range of about 20 nm with a low heating power of 5 mW.     

Optimal Overlapped Message Passing Decoding of Quasi-Cyclic LDPC Codes

Efficient hardware implementation of low-density parity-check (LDPC) codes is of great interest since LDPC codes are being considered for a wide range of applications. Recently, overlapped message passing (OMP) decoding has been proposed to improve the throughput and hardware utilization efficiency (HUE) of decoder architectures for LDPC codes. In this paper, we first study the scheduling for the OMP decoding of LDPC codes, and show that maximizing the throughput gain amounts to minimizing the intra- and inter-iteration waiting times. We then focus on the OMP decoding of quasi-cyclic (QC) LDPC codes. We propose a partly parallel OMP decoder architecture and implement it using FPGA. For any QC LDPC code, our OMP decoder achieves the maximum throughput gain and HUE due to overlapping, hence has higher throughput and HUE than previously proposed OMP decoders while maintaining the same hardware requirements. We also show that the maximum throughput gain and HUE achieved by our OMP decoder are ultimately determined by the given code. Thus, we propose a coset-based construction method, which results in QC LDPC codes that allow our optimal OMP decoder to achieve higher throughput and HUE.     

GIS中实时建立区域拓扑关系的快速算法

针对GIS中建立区域拓扑关系的实时性要求,论文提出一个结合基于图的拓扑信息和基于几何的左转算法的区域拓扑关系生成算法。利用区域的连通性提高了算法效率,左转算法保证了算法的可靠性。