Mass transfer in 3D-printed electrolyzers: The importance of inlet effects

This article investigates the effect of inlet shape, entrance length, and turbulence promoters on mass transfer by using 3D-printed electrolyzers. Our results show that the inlet design can promote turbulence and lead to an earlier transition to turbulent flow. The Reynolds number at which the transition occurs can be predicted by the ratio of the cross-sectional area of the inlet to the cross-sectional area of the electrolyzer channel. A longer entrance length results in more laminar behavior and a later transition to turbulent flow. With an entrance length of 550 mm, the inlet design did no longer affect the mass transfer performance significantly. The addition of gyroid type turbulence promoters resulted in a factor of 2 to 4 increase in mass transfer depending on inlet design, entrance length, and the type of promoter. From one configuration to another, there was a minimal variation in pressure drop (<1600 Pa).     

Melt processing of nanocomposites of cellulose nanocrystals with biobased thermoplastic polyurethane

Nanocomposites of thermoplastic polyurethane (TPU) with cellulose nanocrystals (CNC) without and with surface treatment are obtained by melt processing. Nanocomposites are obtained with nanofiller weight content near of the theoretical percolation threshold (3.9 wt%). Visual observation of CNC agglomerates is sufficient to prove the inefficiency of the mixing in systems with untreated CNC. The crystallization kinetics of the TPU changes with the addition of CNC and this is confirmed by differential scanning calorimetry analysis. Thermogravimetric analysis prove that the addition of CNC increases the thermal stability of the TPU. From the rheological analysis it is possible to verify the absence of percolation and an intermediate state of sol–gel transition in the nanocomposites. CNC/TPU nanocomposites with 5 wt% of treated CNC present better mechanical performance than de neat TPU and the other processed nanocomposites and display around 130% increase in Young's modulus while retaining significant values of toughness, tensile strength and elongation at break.     

When a Tritrophic Interaction Goes Wrong to the Third Level: Xanthoxylin From Trees Causes the Honeybee Larval Mortality in Colonies Affected by the River Disease

The “River Disease” (RD), a disorder impacting honeybee colonies located close to waterways with abundant riparian vegetation (including Sebastiania schottiana, Euphorbiaceae), kills newly hatched larvae. Forager bees from RD-affected colonies collect honeydew excretions from Epormenis cestri (Hemiptera: Flatidae), a planthopper feeding on trees of S. schottiana. First-instar honeybee larvae fed with this honeydew died. Thus, we postulated that the nectars of RD-affected colonies had a natural toxin coming from either E. cestri or S. schottiana. An untargeted metabolomics characterization of fresh nectars extracts from colonies with and without RD allowed to pinpoint xanthoxylin as one of the chemicals present in higher amounts in nectar from RD-affected colonies than in nectars from healthy colonies. Besides, xanthoxylin was also found in the aerial parts of S. schottiana and the honeydew excreted by E. cestri feeding on this tree. A larva feeding assay where xanthoxylin-enriched diets were offered to 1^st instar larvae showed that larvae died in the same proportion as larvae did when offered enriched diets with nectars from RD-colonies. These findings demonstrate that a xenobiotic can mimic the RD syndrome in honeybee larvae and provide evidence of an interspecific flow of xanthoxylin among three trophic levels. Further, our results give information that can be considered when implementing measures to control this honeybee disease.

     

A finite volume–finite difference method with a stiff ordinary differential equation solver for advection–diffusion–reaction equation

A model for atmospheric pollutant transport is proposed considering an advection–diffusion–reaction equation. A splitting method is used to decouple the advection, diffusion and reaction parts. A scheme based on finite volume, finite difference and backward differentiation formula is used for solving an atmospheric transport-chemistry problem.     

Regional aboveground forest biomass using airborne and spaceborne LiDAR in Québec

Aboveground dry biomass was estimated for the 1.3 M km² forested area south of the treeline in the eastern Canadian province of Québec by combining data from an airborne and spaceborne LiDAR, a Landsat ETM+ land cover map, a Shuttle Radar Topographic Mission (SRTM) digital elevation model, ground inventory plots, and vegetation zone maps. Plot-level biomass was calculated using allometric relationships between tree attributes and biomass. A small footprint portable laser profiler then flew over these inventory plots to develop a generic airborne LiDAR-based biomass equation (R² = 0.65, n = 207). The same airborne LiDAR system flew along four portions of orbits of the ICESat Geoscience Laser Altimeter System (GLAS). A square-root transformed equation was developed to predict airborne profiling LiDAR estimates of aboveground dry biomass from GLAS waveform parameters combined with an SRTM slope index (R² = 0.59, n = 1325).Using the 104,044 quality-filtered GLAS pulses obtained during autumn 2003 from 97 orbits over the study area, we then predicted aboveground dry biomass for the main vegetation areas of Québec as well as for the entire Province south of the treeline. Including cover type covariances both within and between GLAS orbits increased standard errors of the estimates by two to five times at the vegetation zone level and as much as threefold at the provincial level. Aboveground biomass for the whole study area averaged 39.0 ± 2.2 (standard error) Mg ha^? 1 and totalled 4.9 ± 0.3 Pg. Biomass distributions were 12.6% northern hardwoods, 12.6% northern mixedwood, 38.4% commercial boreal, 13% non-commercial boreal, 14.2% taiga, and 9.2% treed tundra. Non-commercial forests represented 36% of the estimated aboveground biomass, thus highlighting the importance of remote northern forests to C sequestration. This study has shown that space-based forest inventories of northern forests could be an efficient way of estimating the amount, distribution, and uncertainty of aboveground biomass and carbon stocks at large spatial scales.     

Efficient product sampling using hierarchical thresholding

We present an efficient method for importance sampling the product of multiple functions. Our algorithm computes a quick approximation of the product on the fly, based on hierarchical representations of the local maxima and averages of the individual terms. Samples are generated by exploiting the hierarchical properties of many low-discrepancy sequences, and thresholded against the estimated product. We evaluate direct illumination by sampling the triple product of environment map lighting, surface reflectance, and a visibility function estimated per pixel. Our results show considerable noise reduction compared to existing state-of-the-art methods using only the product of lighting and BRDF.     

Optimal experimental design and some related control problems

This paper traces the strong relations between experimental design and control, such as the use of optimal inputs to obtain precise parameter estimation in dynamical systems and the introduction of suitably designed perturbations in adaptive control. The mathematical background of optimal experimental design is briefly presented, and the role of experimental design in the asymptotic properties of estimators is emphasized. Although most of the paper concerns parametric models, some results are also presented for statistical learning and prediction with nonparametric models.     

Fast in situ 3D nanoimaging: a new tool for dynamic characterization in materials science

1. Download high-res image (269KB)
2. Download full-size image