Factors influencing the production of volatile phenols by wine lactic acid bacteria

This work aimed to evaluate the effect of certain factors on the production of volatile phenols from the metabolism of p-coumaric acid by lactic acid bacteria (LAB) (Lactobacillus plantarum, L. collinoides and Pediococcus pentosaceus). The studied factors were: pH, L-malic acid concentration, glucose and fructose concentrations and aerobic/anaerobic conditions. It was found that, in the pH range of 3.5 to 4.5, the higher the pH the greater the production of volatile phenols. This behaviour is correlated with the effect of pH on bacterial growth. Increasing levels of L-malic acid in the medium diminished the production of 4-vinylphenol (4VP) and stimulated the production of 4-ethylphenol (4EP) by L. plantarum NCFB 1752 and L. collinoides ESB 99. The conversion of 4VP into 4EP by the activity of the vinylphenol reductase may be advantageous to the cells in the presence of L-malic acid, presumably due to the generation of NAD+, a cofactor required by the malolactic enzyme. Relatively high levels of glucose (20 g/L) led to an almost exclusive production of 4VP by L. plantarum NCFB 1752, while at low concentrations (≤ 5 g/L), 4EP is mainly or solely produced. Part of the glucose may be diverted to the production of mannitol as an alternative pathway to regenerate NAD+. This is corroborated by the experiments done with fructose, a compound that can be used as an electron acceptor by some bacteria becoming reduced to mannitol. In anaerobiosis, the reduction of 4VP into 4EP is clearly favoured, which is consistent with the need to increase the availability of NAD+ in these conditions. This study shows that the amount and the ratio 4VP/4EP produced by LAB are greatly affected by certain environmental and medium composition factors. The behaviour of the bacteria seems to be driven by the intracellular NAD+/NADH balance.     

Oxidation mechanisms occurring in wines

The present review aims to show the state of the art on the oxidation mechanisms occurring in wines, as well as the methods to monitor, classify and diagnose wine oxidation. Wine oxidation can be divided in enzymatic oxidation and non-enzymatic oxidation. Enzymatic oxidation almost entirely occurs in grape must and is largely correlated with the content of hydroxycinnamates, such as caffeoyltartaric acid and para-coumaroyltartaric acid, and flavan-3-ols. Non-enzymatic oxidation, also called chemical oxidation of wine, prevails in fermented wine and begin by the oxidation of polyphenols containing a catechol or a galloyl group. These phenolic reactions, both enzymatic and non-enzymatic, result in by-products named quinones. However, in non-enzymatic oxidation, oxygen does not react directly with phenolic compounds. The limitation on the reactivity of triplet oxygen is overcome by the stepwise addition of a single electron, which can be provided by reduced transition metal ions, essentially iron(II) and copper(I). The sequential electron transfer leads to the formation of hydroperoxide radical (HOO^•), hydrogen peroxide (H₂O₂), and hydroxyl radical (HO^•). The later radical will oxidize almost any organic molecule found in wine and will react with the first species it encounters, depending on their concentration. Sulfur dioxide (SO₂) and ascorbic acid, when added to wine, are able to reduce the quinones. Alternative options have been assessed for the prevention of oxidation during wine storage; nevertheless, these are not fully understood or commonly accepted. During aging, aldehydes are important intermediates in the chemical transformations occurring in wines, leading to color and flavor changes. In the same way, a range of off-flavors can be formed from wine oxidation. At low concentrations these flavors may add to the complexity of a wine, but as these increase they begin to detract from wine quality. In addition to the major chemical browning involving wine phenols, the main oxidation reactions occurring during grape juice heating or storage are caramelization and Maillard reaction, which are temperature dependent. Different methods have been proposed in the literature, addressing the complexity and multi-scale related with the oxidation process, to attempt the quantification of antioxidant activity in wines. These methods can be broadly divided in: i) methods based on chemical reactions and ii) methods based on the chemical-physical properties of antioxidants.     

The incorporation of mono- and bi-functionalized multiwall carbon nanotubes in organic photovoltaic cells

We have successfully prepared mono- and bi-functionalized multiwall carbon nanotubes (MWCNT) with thiophene, amine and thiophene-amine groups. The dispersion of nanotubes has been enhanced and stable optimized dispersions in organic solvents were obtained. These functionalized nanotubes have been successfully incorporated into bulk heterojunction (BHJ) organic photovoltaic (OPV) cells with a poly (3-hexyl thiophene) (P3HT) and [6, 6]-phenyl-C(61)-butyric acid methyl ester (PCBM) photoactive blended layer. The incorporation of MWCNT with different functional groups, in the active layer, results in different cell performance with respect to a reference cell. A maximum power conversion efficiency of 2.5% is achieved with the inclusion of thiophene functionalized nanotubes. This improvement in the device performance is attributed to an extension of the exciton dissociation volume and charge transport properties through the nanotube percolation network in P3HT/CNT, PCBM/CNT or both phases. This is believed to be due to more efficient dispersion of the functionalized nanotubes within the photoactive composite layer.     

Distribution of heat sources in vertical open channels with natural convection

In this paper we use the constructal method to determine the optimal distribution and sizes of discrete heat sources in a vertical open channel cooled by natural convection. Two classes of geometries are considered: (i) heat sources with fixed size and fixed heat flux, and (ii) single heat source with variable size and fixed total heat current. In both classes, the objective is the maximization of the global thermal conductance between the discretely heated wall and the cold fluid. This objective is equivalent to minimizing temperature of the hot spot that occurs at a point on the wall. The numerical results show that for low Rayleigh numbers (∼10²), the heat sources select as optimal location the inlet plane of the channel. For configuration (i), the optimal location changes as the Rayleigh number increases, and the last (downstream) heat source tends to migrate toward the exit plane, which results in a non-uniform distribution of heat sources on the wall. For configuration (ii) we also show that at low and moderate Rayleigh numbers (Ra_M ∼ 10² and 10³) the thermal performance is maximized when the heat source does not cover the entire wall. As the flow intensity increases, the optimal heat source size approaches the height of the wall. The importance to free the flow geometry to morph toward the configuration of minimal global resistance (maximal flow access) is also discussed.     

Nafion/polyaniline/silica composite membranes for direct methanol fuel cell application

This work investigates the characterization and performance of polyaniline and silica modified Nafion membranes. The aniline monomers are synthesized in situ to form a polyaniline film, whilst silica is embedded into the Nafion matrix by the polycondensation of tetraethylorthosilicate. The physicochemical properties are studied by means of X-ray diffraction and Fourier transform infrared techniques and show that the polyaniline layer is formed on the Nafion surface and improves the structural properties of Nafion in methanol solution. Nafion loses its crystallinity once exposed to water and ethanol, whilst the polyaniline modification allows crystallinity to be maintained under similar conditions. By contrast, the proton conductivities of polyaniline modified membranes are 3–5-fold lower than that of Nafion. On a positive note, methanol crossover is reduced by over two orders of magnitude, as verified by crossover limiting current analysis. The polyaniline modification allows the membrane to become less hydrophilic, which explains the lower proton conductivity. No major advantages are observed by embedding silica into the Nafion matrix. The performance of a membrane electrode assembly (MEA) using commercial catalysts and polyaniline modified membranes in a cell gives a peak power of 8 mW cm⁻² at 20 °C with 2 M methanol and air feeding. This performance correlates to half that of MEAs using Nafion, though the membrane modification leads to a robust material that may allow operation at high methanol concentration.     

A fractional approach for the motion planning of redundant and hyper-redundant manipulators

The trajectory planning of redundant robots through the pseudoinverse control leads to undesirable drift in the joint space. This paper presents a new technique to solve the inverse kinematics problem of redundant manipulators, which uses a fractional differential of order α to control the joint positions. Two performance measures are defined to examine the strength and weakness of the proposed method. The positional error index measures the precision of the manipulator's end-effector at the target position. The repeatability performance index is adopted to evaluate if the joint positions are repetitive when the manipulator execute repetitive trajectories in the operational workspace. Redundant and hyper-redundant planar manipulators reveal that it is possible to choose in a large range of possible values of α in order to get repetitive trajectories in the joint space.     

Hydrogenated amorphous carbon and carbon nitride films deposited at low pressure by plasma enhanced chemical vapor deposition

Hydrogenated amorphous carbon (a-C:H) films were deposited by plasma enhanced chemical vapor deposition from methane, argon diluted methane, and nitrogen diluted methane at 26.7 Pa with a 13.56 MHz RF power supply. In this pressure regime, multiple-scattering of carbon species within the plasma phase is expected during the transport to the substrates placed on both the driven and the earthed electrodes. These films were analyzed using UV-VIS optical transmittance, monochromatic ellipsometry, Raman spectroscopy and current-voltage measurements. From these results, the effect of the plasma conditions and the effective flux of the carbon species controlled by the input power through the negative self bias are found to be important in the deposition process. The growth conditions at the higher pressure regime are important to synthesize a-C:H films from low energetic carbon species, since it reduces the defect density and improves the quality of the films. Furthermore, the effect of nitrogen on the growth conditions of a-C:H:N films is observed.     

Assessment of DNA damage in coal open-cast mining workers using the cytokinesis-blocked micronucleus test and the comet assay

Coal mining is one of the most important causes of environmental pollution, as large quantities of coal dust particles are emitted. Colombia-South America has large natural coal reserves and “El Cerrejón” is the world's largest open-cast mine located in the northern department of Guajira. The aim of the present study was to evaluate genotoxic effects in a population exposed to coal residues from the open-cast mine “El Cerrejón”. 100 exposed workers and 100 non-exposed control individuals were included in this study. The exposed group was divided according to different mining area activities: (i). Transport of extracted coal, (ii). Equipment field maintenance, (iii). Coal stripping and, (iv). Coal embarking. Blood samples were taken to investigate biomarkers of genotoxicity, specifically, primary DNA damage as damage index (DI), tail length and% of tail DNA using the Comet assay (alkaline version) and chromosome damage as micronucleus (MN) frequency in lymphocytes. Both biomarkers showed statistically significantly higher values in the exposed group compared to the non-exposed control group. No difference was observed between the exposed groups executing different mining activities. These results indicate that exposure to coal mining residues may result in an increased genotoxic exposure in coal mining workers. We did not find a correlation between age, alcohol consumption and service time with the biomarkers of genotoxicity. Our results are the first data of genotoxic effects induced by coal mining exposure in Colombia, and thus, contribute to the exploration of test batteries use for monitoring of exposed populations and may stimulate designing control, hygiene and prevention strategies for occupational health risk assessment in developing countries.