Three-Dimensional Magnetostatic Waves Caused by Electromagnetic Fields in Metallized Ferrite Plates

Materials Science - By using a well-known technique for finding the characteristics of magnetic fields based on the method of decomposition of unknown quantities in a series in small parameter...     

On stabilization of the Fermi level in Ga-doped PbTe-based alloys

The influence of Ga doping and irradiation with high-energy electrons on the galvanomagnetic effects in n-Pb_1?xGe_xTe:Ga (0.04?x?0.06) was investigated. Transitions to the metal-type conduction were found to occur both with an increase in the impurity content and as a result of irradiation. It is concluded that the impurity level does not pin the Fermi level. It is demonstrated that gallium doping and electron irradiation are the most effective complementary methods for controlling the electrical properties of alloys.     

Molecular-biological approaches to studying gene expression during regeneration

This paper constitutes a review of the methodical approaches allowing analysis of the mechanisms underlying development and differentiation. Progress in investigation of the mechanisms underlying embryogenesis is related to the discovery of genic families in the Drosophila genome, which are responsible for different periods of embryogenesis. The true revolution in studies of developmental mechanisms began with the application of molecular-genetic methods for analysis of Drosophila mutant lines. The clarification and analysis of the genes controlling regeneration is one of the most effective paths toward an understanding of the mechanisms underlying regeneration. No mutations affecting regeneration are, and the development of alternative (i.e., not based on mutation analysis) methods of discovery of the genes controlling regeneration is necessary for investigation of the genetic mechanisms of regeneration. The advantages and drawbacks of the two main approaches for discovery of the genes controlling regeneration are considered. The first approach is based on the production of a bank of sequences expressed in the regenerating structures and subsequent screening of the bank by the known probes. This approach also involves analysis of the structure, function, and expression pattern of the obtained homologs. The second approach is based on subtractive hybridization, which allows identification of the genes specifically expressed in the regenerating structures. This approach was made it possible to identify, for the first time, new genes specifically expressed during lens and retina regeneration in amphibians.     

The relationship of the restriction fragment length polymorphism of the apo-B gene to the blood lipid spectrum in patients with ischemic heart disease

Restriction fragment length polymorphism of the apo-B gene at the Xbal restriction site was detected. The association between RFLP of the apo-B gene and the level of lipid metabolism indices was revealed. The levels of total cholesterol LDLP CH and atherogenicity coefficient were significantly higher in homozygotes with this restriction site (X2X2) than in homozygotes X1X1 and heterozygotes.     

A technique for studying the spectral composition and duration of radiation accompanying a shock wave at the rear surface of materials under direct laser irradiation

A photochronographic technique for studying the spectral composition and duration of radiation that accompanies the appearance of a shock wave on the rear surface of a loaded target has been developed. The spectral resolution of this technique was evaluated. A method of the through calibration of the recording channel using radiation of a source with the known spectrum was proposed. The results of the performed calibration are used to restore the spectral distribution on the basis of the obtained spectrochronograms.     

Influence of furfuryl moulding sand on flake graphite formation in surface layer of ductile iron castings

The influence of the use of moulding sand with furan resin, prepared both with fresh sand and reclaimed matrix, on the formation of a flake graphite formation at the surface layer of ductile iron castings has been investigated. A series of experimental heats of ductile iron cast in moulds made of moulding sand characterised by different levels of surface active elements (sulphur, oxygen) were performed. The effect of the wall thickness and the initial temperature of the metal in the mould cavity on the formation of flake graphite in the surface layer of the casting is shown in the paper. Investigations carried out by means of scanning electron microscopy (energy dispersive X-ray spectroscopy and wavelength dispersive X-ray spectroscopy) showed concentration of gradient profiles of surface active elements in the castings surface layer, which are responsible for their quality. Finally, it has been shown that there exists a significant effect of the quality of the sand on the formation of the flake graphite layer and the surface characteristics of ductile iron castings.     

Colour constancy of vat prints on cotton fabrics

Colour constancy of prints with vat dyes on cotton fabrics was investigated by computing the CMCCON02 colour inconstancy index with the key element CAT02 for chromatic adaptation transform. The results show that the highest changes in colour appearance can be expected when the average daylight is replaced with fluorescent light. If D65 daylight is replaced with some other type of daylight, such as D50 or D55, only minor colour deviations occur which do not substantially change the colour appearance of the prints. The analysis of the influence of the lightness and chromaticity of prints shows that the chromaticity of the samples significantly affects their colour constancy. The change of appearance of the prints with lower chroma because of changed illumination conditions is less probable. The influence of a dye blend composition was also investigated. On average, multi‐coloured dye blends have proved to be more colour constant.     

Stress distribution in thick-walled cylinder due to non-uniform radial pressure on the example of reinforcement corrosion in concrete

This paper presents an analytical solution to the non-uniform pressure on thick-walled cylinder. The formulation is based on the linear elasticity theory (plain strain) and stress function method. As an example, the proposed solution is used to model the stress distribution due to non-uniform steel reinforcement corrosion in concrete. The model is formulated considering different scenarios of corrosion pressure distribution. It is validated against the finite element model for different cases of non-uniform pressure distributions. The results show that the corrosion-induced cracks are likely to start just beyond the anodic zone. This is confirmed by the experimental tests on concrete cylinder exposed to non-uniform accelerated corrosion of steel reinforcement. The model can be effectively used to calculate the distribution of corrosion-induced stresses in concrete.     

Effect of ceramic surface treatments on the bond strength of different composite resins

This study was aimed to observe the relationship between the different surface treatments and the bond strength of both composite based adhesive cement and zirconia ceramic. Thirty-two zirconia ceramic discs were fabricated by following the instructions of manufacturer (5 × 5 × 1.5 mm). Four subgroups were obtained from the specimens according to the specified surface treatments respectively: (a) C: control groups: no treatment; (b) SB: sandblasting with 125 μm aluminum oxide particles for 10 s; (c) SC: silica coating for 10 s; (d) Nd :YAG laser . The composite resin specimens Panavia F and Clearfil SA were introduced and polymerized to the treated bonding areas. Afterwards the specimens were stored in distilled water at 37 °C during 24 h, and the shear test was applied. The data were statistically analyzed by ANOVA and Duncan tests. The bond strength was stated significantly higher in silica coating/Panavia F group (23.35 MPa). The lowest bond strength was stated in control groups cemented with Clearfil SA (12.25 MPa). As a result it was determined that the bond strength has affected the both surface treatments and cement types (p < 0.001). The silica coating –treated zirconia ceramic recorded a significant increase in mean bond strength values.