Microbial degradation of rice and barley straws in the sheep rumen and the donkey caecum

The chemical composition, intake, digestibility, ultrastructure and microbial degradation of rice straw from Camargue were compared with barley straw. These variables were observed in two different herbivore digestive ecosystems: the sheep rumen and the donkey caecum. The two straws differed essentially in their ash content, which was three times higher in rice, owing to its silica content. Other chemical components were comparable, except a higher phenolic acids‐to‐lignin ratio in rice. Rice straw was better ingested than barley straw. Organic matter and neutral detergent fibre digestibilities were the same in both straws. Dry matter and cell wall disappearances could be adjusted to the exponential modelling equation with lag time, and differed between animals but not between straws. The sheep rumen had a higher extent of degradation, but the donkey caecum had a higher degradation rate. Statistical analysis revealed that cell‐wall components degradation was similar in the two straws except for ferulic acid, which was more degraded in rice straw. Scanning electron microscopy showed important differences in parenchyma degradation, which was much more effective in rice. Copyright © 2003 Society of Chemical Industry     

Influence of polymeric additives on paraffin wax crystallization in model oils

Wax deposition, precipitation, and gelation make the transport of crude oil in pipelines challenging. The effect of several ethylene copolymers, and small molecules with a long alkyl chain, on wax formation was investigated for n-C₃₂H₆₆ in decane and de-aromatized white oil. Addition of a small amount of EVA (ethylene-co-vinyl acetate) copolymers delayed nucleation by reducing the onset temperature and the wax appearance temperature. They modified the wax crystal-structure and morphology from large plates to tiny particles by adsorbing to the wax surfaces and inhibiting growth. Viscosity and the pour-point were improved by inhibiting the formation of large aggregates. It was demonstrated that the content of vinyl acetate groups in EVA copolymers affected wax crystallization. The small molecules, propylene copolymers, and ethylene copolymers with ethyl acrylate, maleic anhydride, and ethylene glycol showed a weak inhibiting effect. The effect of wax inhibitors was determined by the content and by the type of structure-disturbing groups in the copolymers.     

Impact of the Cd2+ treatment on the electrical properties of Cu2ZnSnSe4 and Cu(In,Ga)Se2 solar cells

The present contribution aims at determining the impact of modifying the properties of the absorber/buffer layer interface on the electrical performance of Cu₂ZnSnSe₄ (CZTSe) thin‐film solar cells, by using a Cd²⁺ partial electrolyte (Cd PE) treatment of the absorber before the buffer layer deposition. In this work, CZTSe/CdS solar cells with and without Cd PE treatment were compared with their respective Cu(In,Ga)Se₂ (CIGSe)/CdS references. The Cd PE treatment was performed in a chemical bath for 7 min at 70 °C using a basic solution of cadmium acetate. X‐ray photoemission spectroscopy measurements have revealed the presence of Cd at the absorber surface after the treatment. The solar cells were characterized using current density–voltage (J–V), external quantum efficiency, and drive‐level capacitance profiling measurements. For the CZTSe‐based devices, the fill factor increased from 57.7% to 64.0% when using the Cd PE treatment, leading to the improvement of the efficiency (η) from 8.3% to 9.0% for the best solar cells. Similar observations were made on the CIGSe solar cell reference. This effect comes from a considerable reduction of the series resistance (R_S) of the dark and light J–V, as determined using the one‐diode model. The crossover effect between dark and light J–V curves is also significantly reduced by Cd PE treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

ITER CODAC interface for the visible and infra-red wide angle viewing cameras

The amount of data generated by the infra-red and visible cameras at ITER is expected to be considerably larger than most diagnostics. ITER will have 12 infra-red cameras plus 12 visible cameras in four different equatorial port plugs. Each of the ports will have a Plant System Host (PSH) that will provide a standard image of the plant system to the ITER's Control and Data Access and Communication (CODAC) system.The two key functions of these cameras will be the scientific exploitation with the detection of interesting physics events and the operational protection of the machine, namely the first wall. Already assuming high bandwidth requirements for both audio and video, ITER will provide a separate network for this kind of communication, which will be used to transmit both the experimental and informational data provided by the cameras.This paper presents the current camera plant system design and its interaction with ITER CODAC system and networks. Starting from the camera specifications several alternatives for data collection and compression are discussed. The required inputs from CODAC and a first specification for the internal finite state machine are also presented. Finally, a possible hardware straw man design solution for the plant system hardware is proposed.     

Inverse wave field extrapolation: a different NDI approach to imaging defects

Nondestructive inspection (NDI) based on ultrasound is widely used. A relatively recent development for industrial applications is the use of ultrasonic array technology. Here, ultrasonic beams generated by array transducers are controlled by a computer. This makes the use of arrays more flexible than conventional single-element transducers. However, the inspection techniques have principally remained unchanged. As a consequence, the properties of these techniques, as far as characterization and sizing are concerned, have not improved. For further improvement, in this paper we apply imaging theory developed for seismic exploration of oil and gas fields on the NDI application. Synthetic data obtained from finite difference simulations is used to illustrate the principle of imaging. Measured data is obtained with a 64-element linear array (4 MHz) on a 20-mm thick steel block with a bore hole to illustrate the imaging approach. Furthermore, three examples of real data are presented, representing a lack of fusion defect, a surface breaking crack, and porosity.     

Effects of voluntary contraction on tibial nerve somatosensory evoked potentials: gating of specific cortical responses

We evaluated vertex-parietal P37, N50, and contralateral N37 somatosensory evoked potentials (SEPs) to posterior tibial nerve stimulation during weak (20 to 30%) and strong (80 to 90%) ipsilateral gastrocnemius-soleus contraction. The results were compared with data obtained during full relaxation. P37 and N50 were attenuated significantly during weak contraction and then abolished during strong contraction, whereas the contralateral N37 was not. The N37 potential spreads over the vertex and over the ipsilateral parietal region during strong contraction. The Cz'-F3 montage was not appropriate for detecting these SEP patterns. These findings suggest that thalamic or cortical gating mechanisms affect specific cortical responses. P37 and N50 could reflect the arrival of the afferent volley into the motor areas from thalamic and cortical (subareas 1 and 2 of S1) projections. N37 could be generated in subarea 3b. Differential analysis of N37 and P37 is required in clinical practice, mainly in those conditions that involve the motor system and in those conditions in which tonic muscular activity is increased.     

Minimally invasive coronary bypass: experience at the Erasme Hospital in 1997-1998

Since the launching of cardiopulmonary bypass in 1952 the landscape of cardiac surgery has been marked by a major milestone every ten years. Though most of the cardiopathies can be surgically treated with satisfactory results in up to 90% of the cases, we must try to improve the existing results. That means--Can we do better, cheaper and less invasive? Several new surgical approaches aiming at so doing are discussed in the present report: Minimally invasive direct coronary arterial bypass (MIDCAB) which is performed through a small anterior thoracotomy; Beating heart revascularization through sternotomy; Heart Port approach; Trans Myocardial Laser Revascularization (TMLR). Those new technologies respectively offer specific advantages to the existing therapies thus represent promising alternatives in selected subcategories of patients.     

Analysis of the laser-cladding process for stellite on steel

Laser-cladding experiments have been performed with STELLITE 6 powder on mild steel substrates, using a 1.5 kW linearly polarized continuous wave CO₂ laser as a heat source. The clad height, the mass efficiency, the dimensions of the melt pool, as well as the global absorptivity, were measured as functions of the powder feed rate and the scanning speed. A quantitative analytical model of the process is proposed, based on the overall mass and energy balance. It allows the calculation of the mass efficiency and of the global absorptivity, taking into account the incorporation of the powder into the melt pool as well as the energy absorbed by the powder jet and the substrate. It successfully explains the experimental results and demonstrates the role played by the melt pool inclination with respect to the substrate. A processing diagram is given to find rapidly the optimal laser treatment conditions and the desired clad height. It is discussed with respect to the other limiting conditions of the process, the geometrical maximum powder efficiency, the porosity, the dilution, and the maximum power of the laser installation.     

Characterization of Porous Carbonaceous Sorbents Using High Pressure CO2 Adsorption Data

In this paper we present adsorption isotherms of carbon dioxide on five different activated carbons from CHEMVIRON CARBON Belgium (Centaur HSV, BPL 410, F30-470, WS 42, Reactivated) and on a carbon molecular sieve from BERGBAU FORSCHUNG Gmbh (CMS II). The temperature is 303 K and the pressure ranges from 100 kPa up to 4000 kPa. Such conditions correspond to relative pressures ranging from 0.01 to 0.5. We also provide, for the same six sorbents, the nitrogen isotherms at 77 K (pressure: 0.001 to 100 kPa, relative pressure: 10^-5 to 1). A theoretical treatment based on the Dubinin-Radushkevich and Stoeckli concept is presented and applied to the experimental results in order to obtain the micropore size distribution function (considered as Gaussian) of each sorbent. Using the CO₂ data, it is possible to point out important structural differences between the six carbons. The theoretical treatment provides micropore size distribution functions in agreement with what is physically expected. Using N₂ data, the structural differences are not so well marked. As a consequence, the structural parameters provided by the theoretical treatment are not reliable: except for the total micropore volume, they fluctuate strongly when changing the relative pressure domain of the used data.     

The Synergistic Effect Between Phosphonocarboxylic Acid Salts and Fatty Amines for the Corrosion Protection of a Carbon Steel

This work was carried out to have a better understanding of the synergistic effect between phosphonocarboxylic acid salts (PCAS) and fatty amines (FA) for the corrosion protection of a carbon steel in a 200 mg l^–1 NaCl solution. These compounds, combined with a biocide at low dosage, are used for water treatment in cooling circuits. First, electrochemical impedance measurements were performed to verify the inhibitive properties of the mixtures. Among the different concentrations tested, maximum efficiency was reached for the mixture containing 200 mg l^–1 PCAS + 50 mg l^–1 FA. Then, electrochemical measurements (current—voltage curves and impedance diagrams) were combined with surface analysis (X-ray photoelectron spectroscopy) for each compound at the optimized concentrations and for the mixture. In the presence of amines, the iron oxide/hydroxide layer remained porous and the inhibition efficiency was relatively low. The FA acted by repelling the water molecules from the interface. PCAS sealed the pores of the oxide layer by forming a chelate. Thus, the growth of the inhibitive layer was limited but the efficiency was higher than for the FA alone. For the optimized mixture, the formation of the chelate was enhanced and the protective properties of the layer improved. A competitive adsorption mechanism was proposed to account for the synergistic effect observed in the presence of both compounds.