Hybrid vortex simulations of wind turbines using a three‐dimensional viscous–inviscid panel method

A hybrid filament‐mesh vortex method is proposed and validated to predict the aerodynamic performance of wind turbine rotors and to simulate the resulting wake. Its novelty consists of using a hybrid method to accurately simulate the wake downstream of the wind turbine while reducing the computational time used by the method. The proposed method uses a hybrid approach, where the near wake is resolved by using vortex filaments, which carry the vorticity shed by the trailing edge of the blades. The interaction of the vortex filaments in the near vicinity of the wind turbine is evaluated using a direct calculation, whereas the contribution from the large downstream wake is calculated using a mesh‐based method. The hybrid method is first validated in detail against the well‐known MEXICO experiment, using the direct filament method as a comparison. The second part of the validation includes a study of the influence of the time‐integration scheme used for evolving the wake in time, aeroelastic simulations of the National Renewable Energy Laboratory 5 MW wind turbine and an analysis of the central processing unit time showing the gains of using the hybrid filament‐mesh method. Copyright © 2017 John Wiley & Sons, Ltd.     

Natural radioactivity in various surface waters in stanbul, Turkey

Gross-α and gross-β, activities of eight well and five tap water samples taken in stanbul were determined. Ra²²⁶, Rn²²², Pb²¹⁴, Bi²¹⁴, K⁴⁰, Cs¹³⁷ activity concentrations in four lake, four sea water, one snow and one rain water samples were also analyzed in order to determine their radioactivity. The results obtained showed that, in general, natural activities in drinking water samples did not exceed WHO and ITS guidelines. In sea and lake water, four samples were over WHO and TSI guidelines. Concentrations ranging from 0.007 to 0.04 Bq l⁻¹ and from 0.02 to 0.1 Bq l⁻¹ were observed for drinking water and the gross-α and gross-β activities, respectively. For all samples the gross-β activities were higher than the corresponding gross-α activities. In order to evaluate the annual effective dose equilavent of ingestion of these waters, a conservative dosimetric calculation was carried out using dose conversion factor suggested by the ICRP. An average annual effective dose equivalent of 0.84 μSv y⁻¹ for Ra²²⁶ was calculated.     

Lipase catalyzed synthesis of polycaprolactone and clay-based nanohybrids

This study presents the use of original systems based on Candida antarctica lipase B (CALB) immobilized on montmorillonite and sepiolite nanoclays as efficient catalysts for the enzymatic polymerization of ε-caprolactone (ε-CL) and the in situ elaboration of nanohybrids.     

The journals in physics that publish Nobel Prize research

Scientometrics - We use the Nobel Foundations Scientific Background material to determine which journals have published Nobel Prize-awarded papers in physics since 1995. Analysing all references in...     

Influence of dry and wet cleaning on the properties of rapid thermal grown and deposited gate dielectrics

Various silicon surface cleaning processes for rapid thermal in-situ polysilicon/ oxide/silicon stacked gate structures have been evaluated. Metal-oxide-semiconductor capacitors were fabricated to assess the effects of cleaning on the quality of gate oxide structures produced by both rapid thermal oxidation (RTO) and rapid thermal chemical vapor deposition (RTCVD). Excellent electrical properties have been achieved for both RTO and RTCVD gate oxides formed on silicon wafers using either an ultraviole/zone (UV/O₃) treatment or a modified RCA clean. On the contrary, poor electrical properties have been observed for RTO and RTCVD gate oxides formed on silicon wafers using a high temperature bake in Ar, H₂, or high vacuum ambient. It has also been found that the electrical properties of the RTCVD gate oxides exhibit less dependence upon cleaning conditions than those of RTO gate oxides. This work demonstrates that initial surface condition prior to gate oxide formation plays an important role in determining the quality of RTO and RTCVD gate oxides.     

Photocatalytic antibacterial performance of Sn(4+)-doped TiO(2) thin films on glass substrate

Pure anatase, nanosized and Sn(4+) ion doped titanium dioxide (TiO(2)) particulates (TiO(2)-Sn(4+)) were synthesized by hydrothermal process. TiO(2)-Sn(4+) was used to coat glass surfaces to investigate the photocatalytic antibacterial effect of Sn(4+) doping to TiO(2) against gram negative Escherichia coli (E. coli) and gram positive Staphylococcus aureus (S. aureus). Relationship between solid ratio of TiO(2)-Sn(4+) in coatings and antibacterial activity was reported. The particulates and the films were characterized using particle size analyzer, zeta potential analyzer, Brunauer-Emmett-Teller (BET), X-ray diffractometer (XRD), SEM, AAS and UV/VIS/NIR techniques. The results showed that TiO(2)-Sn(4+) is fully anatase crystalline form and easily dispersed in water. Increasing the solid ratio of TiO(2)-Sn(4+) from 10 to 50% in the coating solution increased antibacterial effect.     

Preparation and characterization of polyethyleneglycolmethacrylate (PEGMA)-co-vinylimidazole (VI) microspheres to use in heavy metal removal

Polyethyleneglycolmethacrylate (PEGMA) and vinylimidazole (VI) were used in order to obtain microspheres of PEGMA-VI copolymers that can be used in heavy metal removal applications. The obtained copolymers were characterized and their use as sorbents in heavy metal removal was investigated. In the first part of the study, PEGMA-VI microspheres were prepared by suspension polymerization method. The obtained swellable microspheres with 10-50 microm average diameter did not have permanent porosity according to the morphological and physicochemical determinations. The sizes of microspheres became smaller with increasing VI and cross-linker ethyleneglycoldimethacrylate (EGDMA) contents and increasing agitation rate. The VI content, EGDMA ratio, pH and ionic strength were determined as the effective parameters on the swelling behavior of PEGMA-VI microspheres. In the second part of the study, Cu(II) ions were used as a model species in order to investigate the usability of the obtained PEGMA-VI microspheres in heavy metal removal. Adsorption capacities under optimum conditions were determined. The Cu(II) ion adsorption capacity increased by increasing the initial Cu(II) ion concentration, and it reached the maximum value (i.e., 30 mg Cu(II)/g PEGMA-VI microspheres) at 400 mg Cu(II)/L initial Cu(II) ion concentration under the determined optimum conditions. Microspheres were found to be reusable after desorption for several times.     

Two-stage optimisation method for material flow and allocation management in cross-docking networks

Cross-docking is a relatively new logistics strategy in which items are moved from suppliers to customers through cross-docking centres without putting them into long-term storage. An important decision during the planning of cross-docking operations is related to the material flow management in the network, which has great potential to reduce transportation costs. However, until now, there has been a lack of studies regarding operations for both transportation of trucks between locations and trans-shipment of items in cross-docking centres. This study presents a novel two-stage mixed integer linear mathematical model for the transportation problem of cross-docking network design integrated with truck–door assignments to minimise total transportation costs from suppliers to customers. This model also considers incoming/outgoing truck-loading plans and product allocations in the cross-docking area with regard to the two-dimensional physical constraints. Due to the complexity of the problem, a genetic algorithm (GA) is proposed to solve large-sized problems. Computational studies are conducted to examine the validity of the two-stage model and performance of the GA. The computational studies show that the introduced model provides a comprehensive plan for material flow management in cross-docking networks and proposed GA is capable of obtaining effective results for the problem within a short computational time.