Hygienic aspects of porcine gullets

In an attempt to elaborate good manufacturing practices, including the collection, processing and storage of porcine gullets, their bacterial condition immediately after collection (100 samples), as well as that of deep frozen gullets just before incorporation into meat products (40 samples), was assessed. Fresh gullets were found to be contaminated to a high degree: poured plate colony count at 30°C (PPCC) approximately 10(6) to 10(7) and Enterobacteriaceae approximately 10(3) to 10(4) cfu g(-1). Deep frozen gullets showed even higher counts: PPCC approximately 10(7) to 10(8) and Enterobacteriaceae approximately 10(4) to 10(5) cfu g(-1). Hygiene during collection was visually assessed in six abattoirs and found to be satisfactory in two, moderate in three and poor in one. The effects of processing, by cleaning or removal of the mucus membrane, on bacterial condition, pH, colour and odour were assessed before and during storage at 4°C and 20°C. Both cleaning and removal of the mucus membrane resulted in up to approximately a tenfold reduction of colony counts. After 7 days' storage at 4°C these were significantly lower than those of unprocessed gullets (P < 0·01). Processed gullets stored at 4°C were no longer fit for consumption after 4 days' storage. It being impossible to achieve a marked improvement in the bacteriological condition of gullets, the incorporation of these products into sausages should be discouraged and their use in petfoods only allowed under reasonable conditions of hygiene and chilling.     

Improved corrosion protection of aluminum alloys by electrodeposited silanes

Organofunctional silanes recently have emerged as outstanding, environmentally friendly corrosion protectors for metal substrates, compared with conventional chromate treatments. A simple immersion technique is typically used to coat the metal surface with silane films. However, the thickness and uniformity of the films are uncontrolled in this process. This paper proposes a new deposition technique for the silane films on the metal surface, i.e., by electrodeposition. Hydrolyzed silanes are water-soluble, ionized molecules, so they can be deposited on metals by electrodeposition. Various combinations of silane mixtures were tested at different voltages, pH values, bath concentrations, and exposure times on panels of alloy aluminum and mirror-polished ferro-plate. The surface structure was characterized by scanning electron microscopy (SEM) and ellipsometry. The resistance of the film to corrosion was investigated by direct current (DC) polarization and electrochemical impedance spectroscopy (EIS) techniques. Electrodeposition results in a more organized and uniform film with fewer pores, compared with immersed or dipped films. This paper was presented at the 2nd International Surface Engineering Congress sponsored by ASM International, on September 15–17, 2003, in Indianapolis, Indiana, and appears on pp. 320–26 of the Proceedings.     

High performance liquid chromatographic separation of sucrose fatty acid esters

The synthesis of sucrose fatty acid esters always results in complex mixtures. Two procedures for quantitative analysis of sucrose monoesters, respectively sucrose diesters, by means of high performance liquid chromatography on reversed-phase columns, are described. A mixture of methanol and water (85:15, v/v) was used for the separation of the monoesters, while methanol, ethyl acetate and water (65:25:10, v/v/v) was used for the separation of diesters. These methods gave information about the amount of monoesters and diesters in the product; the ratio between sucrose monopalmitate and sucrose monostearate, and the number of the most important structure isomers. A complete separation of all the possible diester products seemed to be impossible, due to the presence of more complex structure isomers. The described procedures can give important support during preparative work on sucrose fatty acid esters and also in the evaluation of these products for application purposes.     

Quantum chemical studies of zeolite proton catalyzed reactions

Theoretical chemistry applied to zeolite acid catalysis is becoming an important tool in the understanding of the adsorption and interaction of guest molecules with the zeolitic lattice. Especially the understanding of the mechanisms by which zeolite catalyzed chemical reactions proceed becomes possible. It is shown here that the old interpretation of carbonium and carbenium ions as intermediates for zeolite catalyzed reactions has to be replaced by a new approach in terms of positively charged transition states that are strongly stabilized by the zeolitic lattice. The large deprotonation energy of the acidic zeolite is overcome by stabilization of the intermediate or transition state positive charge by the negative charge left in the lattice. The zeolitic sites responsible for the adsorption and/or reaction of guest molecules are the Brønsted-acid and Lewis-base sites. We also show that different transition states are responsible for different kinds of reactions, such as cracking, dehydrogenation, etc.     

Kairomones for the egg parasiteTrichogramma evanescens Westwood

In observation-cage experiments some new contact kairomones for the egg parasiteTrichogramma evanescens Westwood are demonstrated.T. evanescens females search significantly longer on cabbage leaves treated with the wing scales of two hosts,Pieris brassicae L. andP. rapae L. Further, egg washes ofP. brassicae containing an oviposition deterrent pheromone for the butterflies, were found to have a contact-kairomonal effect on the parasite.T. evanescens females search significantly longer on cabbage leaves sprayed with a methanol or water wash ofP. brassicae eggs than on leaves treated with the solvent only.Hymenoptera: Trichogrammatidae.Lepidoptera: Pieridae.     

IR在胎面胶中的应用

具有高含量3，4-结构的IR能特别有效地提高高性能轮胎的湿抓着力。因此，可以通过调整炭黑和BR用量来提高轮胎的磨耗和滚动阻力性能，同时保持优异的湿抓着性能。     

The benefit of detergent enzymes under changing washing conditions

The influence of two commercial proteolytic enzymes, Maxatase® and PB-92, were studied viz á viz changing phosphate content and washing conditions. (Maxatase® is a registered trademark of Gist-Brocades N.V.; PB-92 will be sold under the trademark Maxacal^TM.) In the USA and Western Europe, detergent phosphate content is decreasing because of environmental considerations/legislation. Washing conditions are changing towards lower temperatures be-cause of the increased use of synthetic fibers and the need to con-serve energy. Both Maxatase and PB-92 are shown to improve sig-nificantly the performance of US detergents, even at temperatures as low as 70 F. This conclusion is based on Terg-O-Tometer tests on EMPA 116 cloth using US detergents and presoak products.     

Polysulphone and poly(phenylene sulphide) blends: 1. Thermal characterization and phase morphology

The phase behaviour and morphology of injection moulded specimens of polysulphone (PSF) and poly(phenylene sulphide) (PPS) blends were studied by differential scanning calorimetry (d.s.c.), dynamical mechanical thermal analysis (d.m.t.a.) and transmission electron microscopy (TEM). The blends are phase separated regardless of the blend composition as revealed by d.s.c., d.m.t.a. and TEM. Upon annealing at 160°C for 2 h, d.m.t.a. results indicate that the PPS phase remains in the amorphous state at compositions <10%. At compositions between 20 and 35%, the PPS appears to be dispersed in a mixed mode of amorphous and crystalline domains. Above 35% the PPS phase appears to become fully crystallized upon annealing of the blends. At 10% PPS, TEM results showed 35–200 nm size dispersion both in the as-moulded and in the annealed specimens. At 20% the PPS phase varied widely in size, from 35 nm to tens of micrometres but remained as an included phase. TEM also revealed a compound morphology of the included phase at a composition of 50 wt% of each component.