The influence of electron beam irradiation,plastic deformation,and re‐irradiation on crystallinity degree,mechanical and sclerometric properties of GUR 1050 used for arthroplasty

The article describes the influence of an electron beam irradiation (I), plastic deformation (D), and re‐irradiation (R) on the properties of ultrahigh molecular weight polyethylene (GUR 1050). It was found that the modification through irradiation entailed a gradual increase in the degree of crystallinity (after irradiation–I). After plastic deformation and re‐irradiation (IDR) the degree of crystallinity decreases which had a direct influence on the mechanical properties. The polymer irradiation only (technique I) resulted in an increase in the maximum stress as compared with the material in the initial state. The application of deformation and re‐irradiation (technique IDR) allowed increasing the deformation resistance by more than 40%. Moreover, the irradiation with an electron beam resulted in the increase in hardness (H) and Young's modulus (E) proportionally to the applied irradiation dose and in the reduction of total indentation work (W_tot) and its components. After deformation and re‐irradiation the polyethylene hardness went down. The application of technique (I) caused an improvement to the material abrasion resistance (reduction of parameter PD–working scratch depth) with the increasing irradiation dose. The introduction of deformation and re‐irradiation did not have a material impact on parameter (PD) increasing at the same time elastic properties of UHMWPE (increase in parameter NPS–elastic recovery). Modification IDR has changed the wear mechanism (β) toward ploughing and has increased the abrasion‐resistance index (W_β) and also significantly reduced the coefficient of friction (μ) of GUR 1050. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43683.     

A novel functional silica/lignin hybrid material as a potential bio‐based polypropylene filler

A functional silica/lignin hybrid filler was obtained using a process of mechanical grinding of precursors (Syloid^®244 silica and kraft lignin). The product underwent comprehensive physicochemical and dispersive–morphological analysis. The silica/lignin hybrid has good homogeneity and a surface area of 164 m²/g. The effectiveness of combination was confirmed by Fourier transform infrared spectroscopy and elemental analysis. The high electrokinetic stability (over almost the whole of the analyzed pH range) and above all the thermal stability of the resulting material (mass loss equal to 12%) indicate its potential use as a polypropylene (PP) filler. Experiments showed that the incorporation of a small amount of silica/lignin hybrid filler into PP may substantially influence its elongation at break and notched impact strength. Especially at low concentrations of silica/lignin filler (below 5 wt%) an exceptional set of mechanical properties was obtained. The addition of larger amounts of the filler was found not to bring any further improvement. POLYM. COMPOS., 36:913–922, 2015. © 2014 Society of Plastics Engineers     

Endogenous Polyamines and Ethylene Biosynthesis in Relation to Germination of Osmoprimed Brassica napus Seeds under Salt Stress

Currently, seed priming is reported as an efficient and low-cost approach to increase crop yield, which could not only promote seed germination and improve plant growth state but also increase abiotic stress tolerance. Salinity represents one of the most significant abiotic stresses that alters multiple processes in plants. The accumulation of polyamines (PAs) in response to salt stress is one of the most remarkable plant metabolic responses. This paper examined the effect of osmopriming on endogenous polyamine metabolism at the germination and early seedling development of Brassica napus in relation to salinity tolerance. Free, conjugated and bound polyamines were analyzed, and changes in their accumulation were discussed with literature data. The most remarkable differences between the corresponding osmoprimed and unprimed seeds were visible in the free (spermine) and conjugated (putrescine, spermidine) fractions. The arginine decarboxylase pathway seems to be responsible for the accumulation of PAs in primed seeds. The obvious impact of seed priming on tyramine accumulation was also demonstrated. Moreover, the level of ethylene increased considerably in seedlings issued from primed seeds exposed to salt stress. It can be concluded that the polyamines are involved in creating the beneficial effect of osmopriming on germination and early growth of Brassica napus seedlings under saline conditions through moderate changes in their biosynthesis and accumulation.     

Relaxation dynamics of excited states of Tm3+ ions in TeO2-ZnO-Na2O-Y2O3 glasses

Tellurite glasses with the composition of xTm_2O_3-(6-x)Y_2O_3-3Na_2O-25ZnO-66TeO_2(where 0≤x≤6)were obtained by the melt-quenching technique.Absorption(300 K),excitation(300 K) and fluorescence spectra(300 K) as well as fluorescence decay curves of Tm~(3+)-doped title glasses are presented and discussed in details.The Judd-Ofelt analysis based on the room temperature absorption spectrum was applied for determination of fundamental fluorescence properties such as radiative transition probabilities(A_T),branching ratios(β_R),radiative lifetimes(τ_R) of the emitting levels of the Tm~(3+) ion and stimulated emission cross-sections(σ_(em)).Fluorescence spectra were recorded and analysed in the visible and near-infrared spectral range.The emission and effective cross-section were calculated for the ~3F_4→~3H_6 transition,showing that the investigated glasses are promising laser host materials,operating at 1.8 μm.The observed concentration quenching and non-exponential decay curves from the ~1 G_4 and ~3H_4 states indicate nonradiative energy transfer between Tm~(3+) ions.The analysis of non-exponential fluorescence decay curves from the ~1 G_4 and ~3H_4 levels was carried out in framework of the InokutiHirayama and Yokota-Tanimoto models and energy transfer microparameters were determined.The self-quenching model was proposed for describing relaxation of the first excited state of the Tm~(3+) ion.     

Anti-Inflammatory and Antiviral Effects of Cannabinoids in Inhibiting and Preventing SARS-CoV-2 Infection

The COVID-19 pandemic caused by the SARS-CoV-2 virus made it necessary to search for new options for both causal treatment and mitigation of its symptoms. Scientists and researchers around the world are constantly looking for the best therapeutic options. These difficult circumstances have also spurred the re-examination of the potential of natural substances contained in Cannabis sativa L. Cannabinoids, apart from CB1 and CB2 receptors, may act multifacetedly through a number of other receptors, such as the GPR55, TRPV1, PPARs, 5-HT1A, adenosine and glycine receptors. The complex anti-inflammatory and antiviral effects of cannabinoids have been confirmed by interactions with various signaling pathways. Considering the fact that the SARS-CoV-2 virus causes excessive immune response and triggers an inflammatory cascade, and that cannabinoids have the ability to regulate these processes, it can be assumed that they have potential to be used in the treatment of COVID-19. During the pandemic, there were many publications on the subject of COVID-19, which indicate the potential impact of cannabinoids not only on the course of the disease, but also their role in prevention. It is worth noting that the anti-inflammatory and antiviral potential are shown not only by well-known cannabinoids, such as cannabidiol (CBD), but also secondary cannabinoids, such as cannabigerolic acid (CBGA) and terpenes, emphasizing the role of all of the plant’s compounds and the entourage effect. This article presents a narrative review of the current knowledge in this area available in the PubMed, Scopus and Web of Science medical databases.     

Synthesis of Novel Phosphonic‐Type Activity‐Based Probes for Neutrophil Serine Proteases and Their Application in Spleen Lysates of Different Organisms

Neutrophils are a type of granulocyte important in the “first line of defense” of the innate immune system. Upon activation, they facilitate the destruction of invading microorganisms by the production of superoxide radicals, as well as the release of the enzymatic contents of their lysozymes. These enzymes include specific serine proteases: cathepsin G, neutrophil elastase, proteinase 3, as well as the recently discovered neutrophil serine protease 4 (NSP4). Under normal conditions, the proteolytic activity of neutrophil proteases is tightly regulated by endogenous serpins; however, this mechanism can be subverted during tissue stress, thereby resulting in the uncontrolled activity of serine proteases, which induce chronic inflammation and subsequent pathology. Herein, we describe the development of low‐molecular‐weight activity‐based probes that specifically target the active sites of neutrophil proteases.     

Assessment of the hydromorphological state of Carpathian rivers above and below reservoirs

The article presents the results of an assessment of the hydromorphological state of selected Carpathian rivers in sections above and below the reservoirs. An attempt has also been made to assess the impact of reservoirs on the hydromorphological conditions and quality of river habitats. The research was based on the River Habitat Survey (RHS) method. The synthetic indices Habitat Quality Assessment (HQA) and Habitat Modification Score (HMS) were calculated on the basis of the gathered data for each section studied; this allowed the hydromorphological qualities of the rivers to be assessed numerically. The reservoirs interrupt river continuum, and they alter different biotic and abiotic elements of natural environment. However, this study has shown that the operation of reservoirs does not always negatively impact the hydromorphological conditions of rivers that reflect their habitat quality. The influence of reservoirs on a river's hydromorphological state above and below a reservoir's location may be neutral, but it also can improve the habitat conditions of a river.     

High resolution SEM characterization of nano‐precipitates in ODS steels

The performance of the present‐day scanning electron microscopy (SEM) extends far beyond delivering electronic images of the surface topography. Oxide dispersion strengthened (ODS) steel is on of the most promising materials for the future nuclear fusion reactor because of its good radiation resistance, and higher operation temperature up to 750°C. The microstructure of ODS should not exceed tens of nm, therefore there is a strong need in a fast and reliable technique for their characterization. In this work, the results of low‐kV SEM characterization of nanoprecipitates formed in the ODS matrix are presented. Application of highly sensitive photo‐diode BSE detector in SEM imaging allowed for the registration of single nm‐sized precipitates in the vicinity of the ODS alloys. The composition of the precipitates has been confirmed by TEM‐EDS.     

The influence of mining factors on seismic activity during longwall mining of a coal seam

In this article an attempt to determine the influence of mining factors on the seismic activity during the longwall mining of the upper layer of coal seam no. 405/2 in one of the Polish hard coal mines in the Upper Silesian Coal Basin was conducted. Two longwall panels were mined in analogous geological conditions and based on the same mining system and technology. However, there was significant difference with regards to the mining factors, which was reflected in the observed seismic activity. Some tools used in mining seismology were applied to illustrate the aforementioned influence of mining factors, e.g. the frequency-energy distribution, the frequency-magnitude distribution, the 2 D distribution of released seismic energy, the relationship between released seismic energy and the volume of mined coal, the Benioff strain release, and the Gutenberg-Richter(GR) b coefficient distribution(b is the proportion between high and low energy tremors). Concerning the Benioff strain release, a new solution, based on the slope of a fitted line in a moving time window, is proposed.     

Synthesis,characterization and in vitro degradation of poly(ester-anhydride)s based on succinic acid and 1,6-bis-p-carboxyphenoxyhexane

This paper describes synthesis and characteristics of functional poly(ester-anhydride)s bearing allyl pendant groups. The polymers were obtained by polycondensation of 1,6-bis-p-carboxyphenoxyhexane (CPH) and oligo(3-allyloxy-1,2-propylene succinate) terminated with carboxyl groups (OSAGE). The carboxyl groups in OSAGE and in CPH were converted to mixed anhydride groups by acetylation with acetic anhydride. After that, prepolymers thus obtained were condensed in vacuum to yield poly(ester-anhydride)s. The structure of copolymers was confirmed by NMR spectroscopy. Influence of molecular weight of OSAGE as well as of the CPH and OSAGE content on selected properties of poly(ester-anhydride)s was examined. Poly(ester-anhydride)s were subjected to hydrolytic degradation at 37 °C, in aqueous phosphate buffer solution of pH 7.41 (PBS). The course of degradation was monitored by determination of weight loss of samples and ¹H NMR. Fracture surfaces of samples during degradation were examined by scanning electron microscopy.