Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

国六wltc循环换挡策略对排放的影响

为了解决大气污染问题,国家有关部门出台了国六排放的相关法律与法规。其中"GB18352.6-2016轻型汽车污染物排放限值及测量方法(中国第六阶段)"的文件中对换挡进行了相应规定。本文通过实车测试试验数据对比分析了国六wlct循环工况下不同换挡策略对排放的影响。     

宁夏: 扎实推进工程建设项目审批制度改革

正2019年,宁夏认真贯彻落实《国务院办公厅关于全面开展工程建设项目审批制度改革的实施意见》(国办发[2019]11号)部署要求,按照全流程、全覆盖要求,系统化、规范化推进各项工作,取得了积极成效。一、全域一体,统筹谋划,协同各方形成合力(一)组织领导发力宁夏回族自治区党委、政府高度重视,自治区政府主席担任全区工程建设项目审批制度改革领导小组组长,     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.67–xYxBa0.23Ca0.1MnO3 compounds（x=0.10 and x=0.15）

The critical properties of the mixed manganite La0.67–x Y x Ba0.23Ca0.1Mn O3 with x=0.10 and x=0.15 around the paramagnetic(PM)-ferromagnetic(FM) phase transition were investigated through various techniques. These involved modified Arrott plots, Kouvel-Fisher method and Widom scaling relation. Magnetic data, analyzed in the critical region, using the above methods, yielded the critical exponents for(x=0.10) La0.57Y0.10Ba0.23Ca0.1Mn O3(β=0.312±0.002 and γ=1.147±0.003 at T C=299.23±0.05 K). Moreover, the estimated critical exponents of(x=0.15) La0.52Y0.15Ba0.23Ca0.1Mn O3 were β=0.286±0.004 and γ=0.943±0.002 at T C=289.53±0.06 K. The critical exponents’ values were close to the theoretical values of 3D-Ising model and tricritical mean-field model. These results suggested that the present composition should be close to a tricritical point in the La0.67–x Y x Ba0.23Ca0.1Mn O3 phase diagram. Expressing the field dependence as ΔS M∝H n allowed us to establish a relationship between the exponent n and the critical exponents of the material and to propose a phenomenological universal curve for the field dependence of ΔS M.     

低温氮、磁化综合处理钻头使用性能提高的X射线和电子显微技术分析研究

在地质钻探和石油钻井中,钻头都是非常重要的钻进工具。其技术特性,特别是硬度和耐磨性与钻探的技术经济指标,即与机械钻速、钻头进尺和每米钻探成本直接相关。为了提高钻头的工作性能,俄罗斯南方国立技术大学提出了综合低温淬火、磁化回火处理钻头的方法。经过综合处理后,钻头体、复合片底座和钎焊层的硬度分别提高了30%、3%和22%。野外钻进试验结果表明,经过低温液态氮和磁化综合处理的与未经综合处理的钻头相比,每次试验钻头进尺都有提高,总体上钻头进尺提高了22.2%,取得了很好的钻进效果。并对取得的效果进行了X射线和显微技术分析。     

二极管侧面抽运薄片激光器耦合系统研究

设计了二极管侧面抽运Nd:YAG薄片激光器,耦合系统由消像差透镜组和空心光波导组成,对二极管快轴和慢轴方向的抽运光进行压缩和均匀化.采用光线追迹法,同时考虑二极管在快轴和慢轴方向的发散特性及薄片侧面的散射特性,模拟并分析了光线在耦合系统内的传输和薄片内抽运光分布的规律.模拟结果表明耦合系统具有98.1%的耦合效率,同时薄片内具有理想的抽运光分布.     

Optical Properties of One-dimensional Three-component Photonic Band Gap Structure

1　IntroductionMaterialswithPhotonicBandGaps (PBG’s)havebeenwidelystudiedboththeoreticallyandex perimentallyinthepastfew years[1～ 4] .Theexis tenceofgaps,which prohibitthepropagationofelectromagnetic (EM )wavesinacertainrangeoffrequencies,canhavesignificantimpactsbothinsci enceandtechnology .Manypracticalapplicationsofthesestructureshavebeensuggestedanddemon strated ,suchasPhotonicCrystal (PC)microcavi ties[5] ,infraredPC[6] ,PClens[7] ,suppressingspontaneousemission ,manipulatinglight…     

加热-冷却温控系统

现代制造业中采用大型自动化进行控制，以及可重复、精确再现生产步骤，并且替代了过去各自直接的换热，不同介质之间间接加热、冷却的工序。取而代之的是在热处理工艺过程中采用换热器设备。这一工艺概念在近25年。已被西方国家广泛认可。本文将介绍换热设备的基本结构，通过与传统加热系统对比以及一些工业应用的实例。来说明换热设备的长处和不足。