Electric vehicles in China: emissions and health impacts

E-bikes in China are the single largest adoption of alternative fuel vehicles in history, with more than 100 million e-bikes purchased in the past decade and vehicle ownership about 2× larger for e-bikes as for conventional cars; e-car sales, too, are rapidly growing. We compare emissions (CO(2), PM(2.5), NO(X), HC) and environmental health impacts (primary PM(2.5)) from the use of conventional vehicles (CVs) and electric vehicles (EVs) in 34 major cities in China. CO(2) emissions (g km(-1)) vary and are an order of magnitude greater for e-cars (135-274) and CVs (150-180) than for e-bikes (14-27). PM(2.5) emission factors generally are lower for CVs (gasoline or diesel) than comparable EVs. However, intake fraction is often greater for CVs than for EVs because combustion emissions are generally closer to population centers for CVs (tailpipe emissions) than for EVs (power plant emissions). For most cities, the net result is that primary PM(2.5) environmental health impacts per passenger-km are greater for e-cars than for gasoline cars (3.6× on average), lower than for diesel cars (2.5× on average), and equal to diesel buses. In contrast, e-bikes yield lower environmental health impacts per passenger-km than the three CVs investigated: gasoline cars (2×), diesel cars (10×), and diesel buses (5×). Our findings highlight the importance of considering exposures, and especially the proximity of emissions to people, when evaluating environmental health impacts for EVs.     

Preparation and 99mTc labeling of hydrazino nicotinamide modified RC-160 conjugate

1 INTRODUCTIONRadiopharmaceuticals based on small peptide have been currently received considerable illterests for the development of target specific imaging and therapeutic agents.lllln-DTPA-D-Phel-octreotide (Octreoscan), a synthetic peptide analogue of the somatostatin (SST), has fou-nd a widely clinical application for adaging a range of tumorsto date. RC-160 (Vapreotide) is another synthetic analogue of the native SST, which hasaffinity for a different set of SST sub-receptors …     

Scanning tunneling spectroscopic study of monolayer 1T-TaS2 and 1T-TaSe2

The isostructural and isoelectronic transition-metal-dichalcogenides 1T-TaS2 and 1T-TaSe2 are layered materials with intricate electronic structures.Combining the molecular beam epitaxy growth,scanning tunneling microscopy measurements and first-principles calculations,we prepare monolayer 1T-TaS2 and TaSe2 and explore their electronic structures at the atomic scale.Both two-dimensional(2D)compounds exhibit commensurate charge density wave phase at low temperature.The conductance mapping identifies the contributions from different Ta atoms to the local density of states with spatial and energy resolution.Both 1T-TaS2 and 1T-TaSe2 monolayer are shown to be insulators,while the former has a Mott gap and the latter is a regular band insulator.     

基于LabVIEW软件和NI硬件,开发移动式X射线成像诊断系统

0引言移动式X射线成像系统提供了X光透视检查和三维计算机断层扫描(CT)图像模式,主要应用于骨科和神经外科手术室(OR)中.X光透视检查成像模式可提供患者在不同角度的实时内部结构图像,方便外科医生作出准确的诊断.三维CT图像模式则可以帮助医生在手术室中检查病人的当前状态,免去了移动病人的麻烦.通常情况下,完成手术后,只有在CT扫描室里才能检查病人的状态.因此,该系统的诞生可以节省大量检查手术效果的时间,避免重复手术.此外,三维CT图像模式还可以与导航系统配合使用,外科医生能够使用GPS导航系统,结合三维CT图像查看手术仪器的确切位置,从而作出精确的手术切割.     

Selective dissolution of eodiagenesis cements and its impact on the quality evolution of reservoirs in the Xing’anling Group, Suderte Oil Field, Hailar Basin, China

Reservoirs in the Xing’anling Group in the Suderte Oil Field, Hailar Basin exhibit ultra-low to low permeability and high tuffaceous material content. This study comprehensively analyzed diagenesis and quality evolution of these low-permeability reservoirs using thin sections, SEM samples, rock physical properties, pore water data, as well as geochemical numerical simulations. Calcite and analcite are the two main types of cements precipitated in the eodiagenetic stage at shallow burial depths in the reservoirs. These two cements occupied significant primary intergranular pores and effectively retarded deep burial compaction. Petrography textures suggest selective dissolution of massive analcite and little dissolution of calcite in the mesodiagenetic stage. Chemical calculations utilizing the Geochemist’s Workbench 9.0 indicated that the equilibrium constant of the calcite leaching reaction is significantly smaller than that of the analcite leaching reaction, resulting in extensive dissolution of analcite rather than calcite in the geochemical system with both minerals present. Numerical simulations with constraints of kinetics and pore water chemistry demonstrated that the pore water in the Xing’anling group is saturated with respect to calcite, but undersaturated with analcite, leading to dissolution of large amounts of analcite and no dissolution of calcite. Significant secondary intergranular pores have formed in analcite-cemented reservoirs from selective dissolution of analcite in the mesodiagenetic stage; the analcite dissolution formed preferential flow paths in the reservoirs, which promoted feldspar dissolution; and dissolution of such minerals led to the present reservoirs with medium porosity and low permeability. Calcite-cemented tight reservoirs have not experienced extensive dissolution of cements, so they exhibit ultra-low porosity and permeability.     

微波辐射辅助柠檬酸络合法制备的Ho3+/Tm3+/Yb3+共掺杂CaWO4的白光性能（英文）

采用微波辐射辅助柠檬酸络合法制备Ho3+/Tm3+/Yb3+共掺杂CaWO4纳米晶升频转换荧光粉。将柠檬酸络合物前驱体在300~700°C热处理3 h。Ho3+/Tm3+/Yb3+共掺杂CaWO4C在400°C时开始结晶,在600°C时结晶完成。经600°C热处理的Ho3+/Tm3+/Yb3+共掺杂CaWO4主要呈球形,且形态均匀。在980 nm的激光激发下,Ho3+/Tm3+/Yb3+共掺杂CaWO4纳米晶出现肉眼可见的明亮的白色升频转换发射,这种现象来自Tm3+的475 nm蓝光发射以及Ho3+的543 nm绿光和651 nm红光发射。通过调整Tm3+和Ho3+的浓度可以控制Ho3+/Tm3+/Yb3+共掺杂CaWO4的CIE色度图从冷到暖白色之间变化。讨论了Tm3+和Ho3+浓度对升频转换光性能的影响以及与激光泵功率相关的影响机制。     

Microstructural evolution and mechanical properties of in situ TiB2/Al composites under high-intensity ultrasound

Microstructural evolution and mechanical properties of in situ TiB2/Al composites fabricated with exothermic reaction process under high-intensity ultrasound produced by the magnetostrictive transducer were investigated. In this method, the microstructure and grain refining performance of the TiB2/Al composites were characterized by optical morphology(OM), scanning electron microscopy(SEM), energy-dispersive spectrometer(EDS), and X-ray diffraction(XRD) analysis.Microstructural observations show a decreasing trend in the grain size of the composites due to the ultrasound and the content of TiB2 particles in the composites. Compared with the process without ultrasound, the morphology and agglomeration of TiB2 particles are improved by high-intensity ultrasound. Meanwhile, it is proposed that the formation of TiB2 particles occurs via the transformation from Ti Al3, and at the optimal amount of the reactants, the conversion efficiency of Ti Al3 into TiB2 almost reaches up to 100 %. Finally, the effects of high-intensity ultrasound and TiB2 particles on the mechanical properties of the TiB2/Al composites were also discussed.     

Research on Laser Direct Deposition Process of Ti-6Al-4V Alloy

Laser direct deposition （LDD） of metallic components is an advanced technology of combining CAD/CAM （computer aided design/computer aided manufacturing）, high power laser, and rapid prototyping. This technology uses laser beam to melt the powders fed coaxiaUy into the molten pool by the laser beam to fabricate fuUy dense metallic components. The present article mainly studies the LDD of Ti-6Al-4V alloy, which can be used to fabricate aircraft components. The mechanical properties of the Ti-6Al-4V alloy, fabricated by LDD, are obtained using the tension test, and the oxygen content of used powders and deposited specimens are measured. In the present article, it can be seen that the mechanical properties obtained using this method are higher than the ones obtained by casting, and equal to those got by wrought anneal. One aircraft part has been made using the LDD process. Because of this aircraft part, with sophisticated shape, the effect of the laser scanning track on the internal soundness of the deposited part was discussed.     

Influence of Surface-Active Elements on Fluid Flow of MIG Weldpool

A mathematical model describing the behavior of metal inert gas (MIG) welding isformulated in the paper. By means of numerical simulation, the influence of surface-active elements on fluid flow of MIG weldpool is studied. The calculation resultsshow that by adding surface-active elements, the fluid flow behavior is drasticallychanged and the flow fluid flows from lower to upper in vertical direction at the rearof weldpool (w>0). The physical phenomenon is explained from the viewpoint of fluidflow behavior of weldpool that the properties of weld metal is greatly improved andthe content of diffused hydrogen is reduced, thus providing a basis for developing newwelding materials.     

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Mg-Li ALLOY WITH Ca ADDITION

Mg-9wt%Li-2wt%Zn alloy was prepared and studied in this article. The addition of Ca to the alloy from 0.1wt% to 1wt% can refine the α-Mg and the best effect of refinement occurs when Ca content is 0.4wt%-0.5wt%. The billets can be rolled to thin sheets at room temperature, from which it is obvious that the addition of Ca improves alloys ormalin. while it decreases with the excess addition of Ca. The results also show that the ultimate tensile strength （UTS） and yield strength （YS） of the alloy with lwt% Ca may rise by 28% and 25%, respectively, however, the elongation decreases. It is clarified that the adsorption of proper Ca on the grain boundaries refines α-Mg and improves the tensile properties, but the presence of excess Ca and stable Ca2Mg6Zn3phase worsens the elongation.