Advances in the stabilization of flexible PVC by using a liquid calcium‐zinc technology

The global market for liquid mixed‐metal stabilizers is migrating toward heavy‐metal‐free products, Historically, these systems have not been performance and cost competitive. High efficiency calcium‐zinc stabilizers have the potential to replace heavy‐metal‐based products. The intrinsic value of non‐phenolic lubricating calcium intermediates and calcium‐zinc stabilizers is discussed.     

The lost-wax casting of icons, utensils, bells, and other items in South India

Indian artisans and craftsmen have long been masters at extracting and shaping metals and alloys, as proven by archaeological finds from the 2nd—3rd millennia B.C. For example, two well-known artifacts, castings of the dancing girl of Mohenjo Daro and the Mother Goddess of Adichanallur, Tamilnadu, depict a high degree of metallurgical knowledge. Those castings were formed by the lost wax process, which later was modified and became known as investment casting. In various parts of India, this age-old casting process is still being practiced, without any major modifications. This paper discusses details of the process used by the Indian artisans of Swamimalai, Tamilnadu, and Mannar, Kerala, South India in shaping copper-base alloys into icons and utensils, bells, and lamps.     

Inhibition of acid rock drainage from uranium ore waste using a conventional neutralization and precipitation treatment

Glass columns (length 50 cm, i.d. 4 cm) containing 900 g of uranium ore waste were subjected to a three-step process: (1) acid drainage generation, (2) neutralization and precipitation treatment and, again, (3) acid drainage generation. In the first acid generation step, lasting about one year, different variables (pyrite addition, inoculation and irrigation solution) were tested by measuring effluent pH, redox potential, total iron and sulphate. Conditions of acid generation were satisfactorily reproduced, reaching stable pH values around 2.0 that were determined mainly by pyrite addition and the type of irrigation solution used (distilled water or ferrous sulphate). The neutralization and precipitation treatment consisted of alternating irrigations of a neutralizing solution (CaO saturated plus NaOH) and a precipitating solution (ferric sulphate saturated). This treatment caused accumulation of basic iron sulphate and iron oxide precipitates according to SEM studies. After this treatment, the barrier effect created by the reaction products was checked, using irrigation solutions similar to the first step. The effluents collected showed higher pH and lower redox potential, total iron and sulphate values than those observed before the treatment, evidencing inhibition of acid drainage generation.     

Contents

This article explains the basic issues that are facing the global community regarding the emission of carbon dioxide (CO/sub 2/) gas that is degrading our environment and, most significantly, the environment of generations to come. This article deals with the current state of a potential international agreement to curtail greenhouse gases and the subsequent underlying issues. A theory suggests that apparent reluctance to agree to an international treaty by the United States is directly tied to the process of electric utility reforms. The proposed Kyoto Treaty is explained as well as the consequences of its implementation. The current facts surrounding electric utility generation and CO/sub 2/ gas emissions are explained, as are some mitigation efforts.     

Studies on the sample weight for ochratoxin A determination in raw coffee

Ochratoxin A is a mycotoxin that may cause damage to the kidneys and the immune system in man. Foods are examined for this contaminant by the laboratories responsible for official food control. At present, there are no specific provisions for the sampling and examination of ochratoxin A in foods. Therefore, recourse is made to the provisions for aflatoxins. They prescribe the processing of samples with a weight of up to 30 kg. The examination of raw coffee for ochratoxin A in conjunction with the German Food Monitoring Programme of 2000 was undertaken with various sample weights (5, 10 and 30 kg) in order to identify the influence of the sample weight on the result. Overall, the sample weight did not have an effect on the detection and level of the ochratoxin A content in the samples of raw coffee examined.     

Opposed jet flames of lean or rich premixed propane-air reactants versus hot products

Several opposed jet flames, produced by a lean H₂-air jet opposing a rich or lean C₃H₈-air jet, are investigated. Spontaneous Raman spectroscopy is used for major species concentration and temperature measurements along the opposed jet centerline. The hot products of the H₂-air flame simulate the burnt gases of strong-burning near-stoichiometric reactants as they impinge upon a weak-burning lean or rich hydrocarbon-fueled reactant mix, a situation encountered in stratified charge operation of direct injection spark ignition engines. In addition the H₂-air flame hot products facilitate experimental data interpretation through the absence of carbon-bearing species. Good agreement between numerical and experimental data are obtained for a rich (equivalence ratio, φ = 1.25) C₃H₈-air jet versus a lean (φ = 0.4) H₂-air jet. Two lean C₃H₈-air jets (φ = 0.64 or 0.60), versus the φ = 0.4 H₂-air jet, are also investigated. For both of these flames, the amount of CO₂ production strongly depends upon φ, with the φ = 0.64 flame having a peak CO₂ mole fraction an order of magnitude higher than for the φ = 0.60 flame, and the C₃H₈ flames burning either as a normal flame (high CO₂) or as a “negative flame speed” flame producing little CO₂ and then only through diffusion of C₃H₈ into the hot products jet. The numerically predicted and experimental CO₂ profiles agree well for the positive flame speed flame, but the large discrepancy between predicted and measured peak CO₂ in the negative flame speed flame suggests modeling improvements are needed for this type of flame.     

Using bald eagles to indicate the health of the Great Lakes' environment

The bald eagle (Haliaeetus leucocephalus) is one of the most studied birds of North America, and a great amount of natural life‐history information, including the response of various stressors on the eagles' ability to reproduce, are well known. In Michigan, the eagle has been chosen to track the trends of bioaccumulative compounds of concern across watersheds in the state. The state has been divided into major watersheds, and 20% of these are surveyed each year. A control area in northern Minnesota, Voyageurs National Park, is also sampled annually. We report here on the methods used, the preliminary results of the 1999 field season, and how differences in mercury concentrations varied over a 10‐year period. Mercury in feathers of nestling eagles declined over time only in Lakes Michigan and Huron, but have not decreased among other subpopulations in Michigan. Concentrations of polychlorinated biphenyls (PCBs) and 4,4′‐DDE in blood plasma from nestling eagles have declined over time for most subpopulations; however, they remain greater for breeding areas associated with the Great Lakes' food web. Sea eagles of the genus Haliaeetus are a good sentinel species to track trends in bioaccumulative compounds in aquatic systems.     

Use of radial forces for fault detection in tapping

A model-based method for fault detection in tapping based on torque and radial forces is proposed. The method allows the identification of faults typical of a tapping operation including axial misalignment, tap runout, tooth breakage both singly and together. The validation experiments have been run on aluminum 356 workpieces for different combinations of process faults. Results have shown that the model predictions are in good agreement with the experimental radial force and torque signals under various fault conditions.