Viscosity of Fe90B x Si(10 − x) melts

High Temperature - The temperature dependences of the viscosity of liquid Fe90B x Si(10 − x) alloys are studied in the mode of heating and subsequent cooling. The temperature dependences of...     

Kariya (Hildegardia barteri) seed oil extraction: comparative evaluation of solvents,modeling, and optimization techniques

In this work, the effects of solid/solvent ratio (0.10–0.25?g/ml), extraction time (3–8?h), and solvent type (n-hexane, ethyl acetate, and acetone) together with their shared interactions on Kariya seed oil (KSO) yield were investigated. The oil extraction process was modeled via response surface methodology (RSM), artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) while the optimization of the three input variables essential to the oil extraction process was carried out by genetic algorithm (GA) and RSM methods. The low mean relative percent deviation (MRPD) of 0.94–4.69% and high coefficient of determination (R²) > 0.98 for the models developed demonstrate that they describe the solvent extraction process with high accuracy in this order: ANFIS, ANN, and RSM. The best operating condition (solid/solvent ratio of 0.1?g/ml, extraction time of 8?h, and acetone as solvent of extraction) that gave the highest KSO yield (32.52?wt.%) was obtained using GA-ANFIS and GA-ANN. Solvent extraction efficiency evaluation showed that ethyl acetate, n-hexane, and acetone gave maximum experimental oil yields of 19.20?±?0.28, 25.11?±?0.01, and 32.33?±?0.04?wt.%, respectively. Properties of the KSO varied based on the type of solvent used. The results of this work showed that KSO could function as raw material in both food and chemical industries.     

Stamping of Nonuniform Channels. 5. Calculation Methods for Channel Extrusion. 5.1. Formulas

Russian Engineering Research - Formulas are derived for the most important parameters of channel extrusion.     

Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

An automated system based on cryogenic probe station for integrated studies of semiconductor light-emitting structures and wafers in the range of 15 to 475 K

An automated system for integrated electrophysical and optical studies of semiconductor nanoheterostructures, which operates in a wide temperature range from 15 to 475 K, is designed. The setup is intended to measure the temperature and frequency admittance and electroluminescence spectra of light-emitting diode and laser chips formed on substrates of diameter up to 50.2 mm, and the distribution of parameters over the wafer. The setup includes the closed-cycle helium cryogenic station, LCR meter, and temperature controller. The characterization results of nanoheterostructures with InGaN/GaN multiple quantum wells, which are used for creating highly efficient white and blue light-emitting diodes, are presented.     

Entry into force of the UN Watercourses Convention: why should it matter?

The United Nations Watercourses Convention entered into force on 17 August 2014, following a long and complex journey that dates back to 1970 when the UN referred the matter to its legal arm, the International Law Commission. This article follows the Convention through that long and turbulent road, examines its main provisions and analyses the reasons for the delay of its entry into force. It concludes by answering the question of why entry into force of the Convention should indeed matter.     

Irreversible deformation and the superplasticity of a TN-1 alloy during thermal cycling through the martensitic transformations ranges under loading

The influence of the thermal cycling conditions on the thermal-cycling creep of a TN-1 alloy and the related irreversible deformations is studied. The conditions under which an anomalous increase in the irreversible deformations begins are determined. The structural mechanism of the irreversible deformations of an equiatomic alloy is shown to be analogous to the structural mechanism of metal creep at high temperatures: it predominantly has a dislocation character. It is proposed to use the effect of anomalous increase in the deformation of materials with reversible martensitic transformations for forming parts made of these materials at low temperatures.