A limit analysis of nonlinear elastic lateral displacements of thin-walled reinforced and prestressed beams

An incremental iterative process based on direct energy minimization is presented for a limit analysis of nonlinear elastic lateral displacements and twists of reinforced and prestressed beams. Problems encountered with the constitutive relations are discussed and two possible material models are presented.     

WHIM, the Window Handler and Input Manager

This article describes WHIM, the Window Handler and Input Manager, a window management system being developed as part of the QuickSilver operating system project at IBM's Almaden Research Center. Another version of WHIM runs under AIX on the IBM PC RT. This article contrasts and compares the overlapped window scheme used in WHIM with the tiled window scheme used in other systems. The advantages of the window management scheme used in WHIM are detailed, and the effect of display interfaces on the window manager is described.     

Evaluation of NDT methods for detection of prestressing steel damage at post-tensioned concrete structures

For an assessment of the risk potential of existing structures, where in the case of prestressing steel damage the load-bearing capacity could be significantly affected, non-destructive testing techniques which enable reliable evaluation of the condition of the prestressing steels are of utmost importance. During the demolition of a post-tensioned concrete bridge in Berlin where damage of prestressing wires due to hydrogen-induced stress corrosion cracking were found in former investigations, parts of the girders of the bridge superstructure could be taken out. After non-destructive investigations by means of two testing techniques based on magnetic leakage flux measurement and one technique based on electromagnetic resonance measurement, subsequent removal of the concrete cover up to the ducts, opening the ducts and evaluation of the prestressing steels allowed a verification of the results obtained by the NDT methods. From the results it can be concluded that areas with fractures of several wires can be detected by the two techniques based on magnetic leakage flux measurement.     

A Graphene Field-Effect Device

In this letter, a top-gated field-effect device (FED) manufactured from monolayer graphene is investigated. Except for graphene deposition, a conventional top-down CMOS-compatible process flow is applied. Carrier mobilities in graphene pseudo-MOS structures are compared to those obtained from the top-gated Graphene-FEDs. The extracted values exceed the universal mobility of silicon and silicon-on-insulator MOSFETs     

Modeling of anaerobic treatment of wastewater in ponds.

A mathematical model to simulate the performance of anaerobic ponds was developed incorporating both settling of particulate components and the biological anaerobic digestion process. The biological activity includes solubilization of particulate organic matter; methanogenesis and the sulphate reduction process. The model considers that an anaerobic pond comprises a series of equal size columns. Each column has three compartments viz. liquid layer, active sediment layer and inert sediment layer. The existence of organic matter and sulphate removal mechanisms both in the bulk as well as sediment layer of the ponds and the exchange of the soluble components between the layers has been included in the model. The model was transferred to a computer program using VisSim Basic software. The model was verified by comparing simulated results with full-scale as well as with laboratory-scale anaerobic pond performance data. A good agreement between the simulated and the observed pond performance was achieved.     

Complex design of electromagnetic drives with prescribed dynamic performances

The design principals of fast-operating electromagnetic drives with prescribed dynamic performances are examined. The represented procedure permits the command parameters to be to determined with the guaranteed prescribed parameters of the drive.     

Multistage Zeolite Drying for Energy-Efficient Drying

This work discusses the potential of three multistage zeolite drying systems (counter-, co-, and cross-current) with a varying number of stages. The evaluation showed that for 2-4 stages with heat recovery the efficiency of the systems ranges between 80 and 90%. Additionally, by introducing a compressor, the latent heat in the exhaust air from the regenerator is recovered and used to heat the inlet air for an additional drying stage. As a result, for the counter-current drying system and compressor pressure 1.5-2 bar, a maximum energy efficiency of 120% is achieved, which results in halving the energy consumption compared to conventional drying systems.     

New high-efficiency low-waste technology at the Vyksa Metallurgical Plant for operating metallurgical equipment with the use of Kompaks® monitoring systems

Introduction of the BER? KOMPAKS® automated system at the Vyksa Metallurgical Plant to safely and efficiently manage the operation of the plant’s equipment has allowed the facility to begin operating that equipment based on real-time evaluations of its actual physical condition. Introduction of the new system has also allowed better coordination of repair-scheduling with ongoing production operations, significantly improved the reliability and readiness of the equipment for operation at 100% capacity, completely eliminated the human factor from the process of monitoring the condition of equipment, and made it possible to check the quality and timeliness of equipment maintenance and repair work so as to ensure safe, efficient operation of the entire production complex.