Tunable optical filter for colorimetric applications

A temperature-controlled tunable optical filter for use in the visible range and based on the Christiansen effect, in which the solid particles have been substituted with glass fibers, has been fabricated and tested. The construction of the filter and transmission properties are reported. For an operating temperature of 95°C, the peak wavelength was 509.5 nm, with a peak transmission of 50.8% and a FWHM of 71 nm.     

Use of electronic probes for classifying lamb carcasses

Three commercially available electronic lamb carcass grading probes (Hennessy Grading Probe, AUS-Meat Sheep Probe, Swedish FTC Lamb Probe) and one developmental probe (Ruakura GR lamb probe) were assessed for accuracy and suitability for use on-line on the lamb dressing chain for objectively classifying lamb carcasses. GR is the total tissue thickness over the 12th rib taken at a distance 11 cm from the mid-line, used to define fatness in lamb carcass grading in New Zealand. Probe measurements were compared with manually measured GR (sometimes used at present) and Toland probe measurements (total tissue depth between the ribs) for accuracy of predicting both GR on the right side of the carcass and also carcass water (indicating muscle) and fat content. Probes were tested on six occasions, each having approximately 50 lambs. All probes combined with carcass weight accounted for over 70% of the variation (R(2)) of GR right, with GR left accounting for 92% of the variation of GR right. Inclusion of a quadratic probe term was not quite as useful as inclusion of carcass weight for predicting GR right. The three commercial electronic probes individually when combined with carcass weight could account for 36-49% of the variation in the percentage of water and fat in the carcass, with the manual GR probe (right) on the chilled carcass accounting for 55% of the variation in water and 58% of the variation in fat percentages. Chilled carcass measurements are expected to give better results than readings on hot carcasses. The use of a quadratic probe coefficient instead of carcass weight with the probe readings gave similar accuracy of prediction of carcass composition. There was little difference between the two sides in the accuracy of prediction. Small differences were found between regressions relating probe readings to GR and composition for the different probing occasions. The electronic probe results from this trial are consistent with overseas results where probes are in use for objectively grading the carcasses of meat animals.     

Reconstruction from projections under time-frequency constraints

Low-pass filtering computed tomography (CT) images to reduce noise may smooth or modify image features which are very important to the physician. Image features are often more easily identified and processed in the time-frequency plane. The authors use time-frequency distributions for spatially varying filtering of noisy CT images, constraining time-frequency representation coefficients of the projection data or of the reconstructed image to be zero in certain regions of the time-frequency plane. The authors consider two different applications: 1) filtering the projection data and then performing image reconstruction; and 2) filtering the reconstructed image directly. Criteria minimized, subject to constraints, may be either a deterministic minimum weighted perturbation of the given projection data or a stochastic minimum mean-square error in colored Gaussian noise. Results show improvement over processing the image with a linear spatially invariant filter.     

Visual comparability of 3D regular sampling and reconstruction

The Body-Centered Cubic (BCC) and Face-Centered Cubic (FCC) lattices have been analytically shown to be more efficient sampling lattices than the traditional Cartesian Cubic (CC) lattice, but there has been no estimate of their visual comparability. Two perceptual studies (each with N = 12 participants) compared the visual quality of images rendered from BCC and FCC lattices to images rendered from the CC lattice. Images were generated from two signals: the commonly used Marschner-Lobb synthetic function and a computed tomography scan of a fish tail. Observers found that BCC and FCC could produce images of comparable visual quality to CC, using 30-35 percent fewer samples. For the images used in our studies, the L(2) error metric shows high correlation with the judgement of human observers. Using the L(2) metric as a proxy, the results of the experiments appear to extend across a wide range of images and parameter choices.     

Variability and misclassification of worker estimated hand force

Ergonomic studies often use worker estimated hand force reproduced on a dynamometer to quantify force exposures but this method has not been well-studied in real work settings. This study evaluated the validity of worker estimates of hand force in a field study and determined the misclassification of worker estimated hand force exposures compared to directly measured forces. Eight experienced sheet metal assemblers completed ¼-inch diameter fastener installations using 6 different pneumatic tools. Grip forces were recorded by a pressure mat and were compared to worker estimated forces demonstrated on a dynamometer. Directly measured and worker estimated readings showed moderate correlations (0.53–0.67) for four installation tools and fair to moderate for two tools. The coefficient for variation of force estimates was 65% within repeated subject trials and 78% between averaged subject trials but 69% between subject trials during actual tool installations. Misclassification of worker estimated exposures varied by two cut-points: 29% using 4.0 kg and 49% using 6.0 kg. The force match procedure may provide adequate differentiation of high and low exposures in some settings, but is likely to result in substantial misclassification in other settings.     

Acceleration and filtering in the generalized Landweber iteration using a variable shaping matrix

The generalized Landweber iteration with a variable shaping matrix is used to solve the large linear system of equations arising in the image reconstruction problem of emission tomography. The method is based on the property that once a spatial frequency image component is almost recovered within in in the generalized Landweber iteration, this component will still stay within in during subsequent iterations with a different shaping matrix, as long as this shaping matrix satisfies the convergence criterion for the component. Two different shaping matrices are used: the first recovers low-frequency image components; and the second may be used either to accelerate the reconstruction of high-frequency image components, or to attenuate these components to filter the image. The variable shaping matrix gives results similar to truncated inverse filtering, but requires much less computation and memory, since it does not rely on the singular value decomposition.     

Novel system for coupling to surface-plasmon polaritons

A novel system for coupling to surface-plasmon polaritons has been designed, fabricated, and assembled. Microcomputer controlled electronics provide for accurate and repeatable angular positioning of the waveguide coupler with respect to the incident beam and for precise angular registration of detector output signals. The optical components, combined with a retroreflecting spherical-surface coupling prism, give apertured control of the beam profile at the coupling interface.