Geographic Variation in Attraction to Human Odor Compounds by Aedes aegypti Mosquitoes (Diptera: Culicidae): A Laboratory Study

Previous investigations of Aedes aegypti response to human odor components have revealed a number of compounds that attract host-seeking females. However, such studies have utilized only a small number of long-term laboratory Ae. aegypti colonies. Using laboratory y-olfactometers, we studied the attraction of four different Ae. aegypti populations (North Queensland, Australia; Florida, USA; Singapore; and Minas Gerais, Brazil) to a key attractant compound from human skin, lactic acid. Combinations of lactic acid with ammonia and a fatty acid (caproic acid) were also investigated. The aims were to determine the extent of variation in lactic acid dose response among populations and to see whether all four populations responded equally to combinations of human odor components. Although all Ae. aegypti populations were attracted to lactic acid, there were differences in the threshold dose: Florida 0.03 μg/min, Singapore 0.17 μg/min, North Queensland 1.92 μg/min, and Brazil 10.27 μg/min. Attraction to lactic acid alone (maximum <40%) was significantly lower than for human odor (>87% for all populations). Significant increases in attraction were observed when lactic acid was combined with ammonia or caproic acid, although not for all populations. In addition, the highest doses of caproic acid tested decreased attraction when combined with lactic acid. The divergent responses to host kairomones seen here may be evidence of adaptation to locally available hosts in different parts of the geographic range of Ae. aegypti.     

The Mandibular Gland Secretions of the Leaf-Cutting Ants Atta sexdens sexdens and Atta opaciceps Exhibit Intercaste and Intercolony Variations

The mandibular gland secretions of worker castes from wild colonies of the leaf-cutting ants Atta sexdens sexdens and Atta opaciceps were analyzed quantitatively by gas chromatography–mass spectrometry. The secretions comprised a complex mixture of volatile, mainly oxygenated compounds, and their profiles exhibited considerable qualitative and quantitative variations among species and castes. The known alarm pheromone 4-methyl-3-heptanone was common to both species. The elevated relative proportions of this ketone found in the secretions of gardeners and generalists suggest that such castes are primarily responsible for the production and release of the alarm pheromone. Quantitative variations (but no qualitative differences) in the profiles of secretions of soldiers from different colonies of A. sexdens sexdens were detected, supporting the view that intraspecific colony recognition is mediated through mandibular gland secretions. Subsequent laboratory assays showed that, among the compounds identified by GC–MS, 4-methyl-3-heptanone elicited a strong alarm response in workers of A. sexdens sexdens and A. opaciceps.     

A novel closed-loop electromechanical stimulator to enhance osseointegration with immediate loading of dental implant restorations

The degree of osseomechanical integration of dental implants is acutely sensitive to their mechanical environment. Bone, both as a tissue and structure, adapts its mass and architecture in response to loading conditions. Therefore, application of predefined controlled loads may be considered as a treatment option to promote early maturation of bone/implant interface prior to or in conjunction with crown/prosthesis attachment. Although many studies have established that the magnitude, rate of the applied strain, and frequency have significant effects on the osteogenic response, the actual specific relationships between strain parameters and frequency have not yet been fully defined. The purpose of this study was to develop a stimulator to apply defined mechanical stimuli to individual dental implants in vivo immediately after implantation, exploring the hypothesis that immediate controlled loading could enhance implant integration. An electromechanical device was developed, based on load values obtained using a two-dimensional finite element analysis of the bone/implant interface generating 1000 to 4000 pe and operated at 30 and 3 Hz respectively. The device was then tested in a cadaveric pig mandible, and periosteal bone surface strains were recorded for potential future comparison with a three-dimensional finite element model to determine loading regimens to optimize interface strains and iterate the device for clinical use.     

Challenges facing quantification of rat locomotion along beams of varying widths

Optoelectronic motion capture systems have been widely used to investigate temporal gait parameters in humans and animals in order to understand function and behavioural attributes of different pathologies, e.g. Parkinson's disease (PD). The aim of the present paper was to investigate the practicality of utilising this system to investigate the effects of a unilateral 6-hydroxydopamine (6-OHDA) lesion on rat locomotion while walking on beams of varying widths (graduated, narrow, and wide). Temporal gait parameters of ten male Lister Hooded rats (five controls and five hemiparkinsonian) were observed using passive markers placed in locations that were representative of their four limbs and their body axis. The results demonstrate that marker-based motion capture can provide an effective and simple approach to quantifying temporal gait parameters for rat models of PD. They also reveal how the width of the path affects the locomotion in both experimental cohorts. Such measurements can be compared with human motion analysis to explore correlations between the animal model and human behaviour, which is an important step for translational medicine.     

New Al2O3:C,Mg crystals for radiophotoluminescent dosimetry and optical imaging

Optical and dosimetric properties of a new radiophotoluminescent material based on aluminum oxide doped with carbon and magnesium (Al2O3:C,Mg) and having aggregate oxygen vacancy defects are presented. The Al2O3:C,Mg crystals are characterized by several new optical absorption and emission bands. It is suggested that the main optical properties of this material are due to the formation of aggregate defects composed of two oxygen vacancies and two Mg-impurity atoms. Radiation-induced optical absorption bands are centered at 335 and 620 nm and produce fluorescent emission at 750 nm with a 75 +/- 5 ns lifetime. The dose measurements are performed by illumination of the Al2O3:C,Mg crystal with 335 nm or 650 nm light and by measuring the intensity of the 750 nm fluorescence. The detector material is insensitive to room light before and after the irradiation and the traps are stable up to 600 degrees C. A dose measurement range between 5 mGy and 200 Gy, suitable for therapeutic radiology applications, was demonstrated. The short luminescent lifetime and nondestructive readout is favorable for imaging applications.     

Luminescence dating of quaternary deposits in geology in Brazil

In the present work, systematic dating by luminescence methods has been done on 50 Quaternary geological samples within the study area of S?o Paulo State, Brazil. Bleaching experiments showed that residual TL intensity of 375 degrees C peak, of the quartz, was obtained after 10 h of sunlight exposition. Intensities decays of the 325 and 375 degrees C TL peaks can be fitted using second order exponential equation. Paleodose values were evaluated using regeneration methods with multiple aliquots. Samples dated indicate preliminary ages varying from 9 +/- 1 to 935 +/- 130 ka for colluvio-elluvial deposits, and from 17 +/- 2 to 215 +/- 30 ka for alluvial deposits of the study area. They cover four peneplained surfaces shaped during the Quaternary: I (1000-400 ka), II (400-120 ka), III (120-10 ka) and IV (10 ka until today), in decreasing order.     

Search for ionisation density effects in the radiation absorption stage in LiF:Mg,Ti

Optical absorption (OA) dose-response of LiF:Mg,Ti (TLD-100) is studied as a function of electron energy (ionisation density) and irradiation dose. Contrary to the situation in thermoluminescence dose-response where the supralinearity is strongly energy-dependent, no dependence of the OA dose filling constants on energy is observed. This result is interpreted as indicating a lack of competitive process in the radiation absorption stage. The lack of an energy dependence of the dose filling constant also suggests that the charge carrier migration distances are sufficiently large to smear out the differences in the non-uniform distribution of ionisation events created by the impinging gamma/electron radiation of various energies.     

Kinetic studies of copper ion adsorption on palm kernel fibre

Palm kernel fibre is a common agricultural waste in West Africa and its use as an adsorbent for the removal of copper ions from aqueous solution has been studied. Batch kinetics studies were carried out based on the assumption of the pseudo-second-order kinetic model, which was developed to predict the rate constant of adsorption, the equilibrium adsorption capacity and initial adsorption rate with the effect of initial copper concentration and reaction temperature. A comparison was made of the linear least-squares method and a trial-and-error non-linear method of the pseudo-second-order kinetic model for the adsorption of copper onto palm kernel fibre.     

Effects of grass silage and soybean meal supplementation on milk production and milk fatty acid profiles of grazing dairy cows

The effects of supplementation with grass silage and replacement of some corn in the concentrate with soybean meal (SBM) on milk production, and milk fatty acid (FA) profiles were evaluated in a replicated 4 × 4 Latin square study using 16 dairy cows grazing pasture composed of ryegrass, Kentucky bluegrass, and white clover. Each experimental period lasted for 3 wk. The 4 dietary treatments were PC, 20 h of access to grazing pasture, supplemented with 6 kg/d of corn-based concentrate mixture (96% corn; C); PCSB, 20 h of access to grazing pasture, supplemented with 6 kg/d of corn- and SBM-based concentrate mixture (78% corn and 18% SBM; CSB); SC, 7 h of access to grazing pasture during the day and 13 h of ad libitum access to grass silage at night, supplemented with 6 kg/d of C concentrate; and SCSB, 7 h of access to grazing pasture during the day and 13 h of ad libitum access to grass silage at night, supplemented with 6 kg/d of CSB concentrate. The concentrate mixtures were offered twice each day in the milking parlor and were consumed completely. Grass silage supplementation reduced dietary crude protein and concentration of total sugars, and dietary SBM inclusion increased dietary crude protein concentration and decreased dietary starch concentration. Milk yield and energy-corrected milk were increased by SBM supplementation of cows with access to grass silage. Milk protein concentration was lower in cows offered grass silage, regardless of whether SBM was fed. Dietary SBM inclusion tended to increase milk fat concentration. Plasma urea N was reduced by silage feeding and increased by SBM supplementation. Supplementation with grass silage overnight could represent a useful strategy for periods of lower pasture availability. Dietary inclusion of SBM in solely grazing cows had no effects on milk production and composition, exacerbated the inefficient capture of dietary N, and increased diet cost. Grass silage supplementation affected milk FA profiles, increasing both the FA derived from de novo synthesis and those derived from rumen microbial biomass, and decreasing the sum of C18 FA (mostly derived from diet or from mobilization of adipose tissue reserves). Milk fat concentrations of conjugated linoleic acid cis-9, trans-11, vaccenic acid (18:1 trans-11), and linolenic acid (18:3n-3) were unaffected by grass silage supplementation, suggesting that partial replacement of pasture by unwilted grass silage does not compromise the dietary quality of milk fat for humans.     

Conditions for high pressure inactivation of Vibrio parahaemolyticus in oysters

The objective of this study was to identify the high pressure processing conditions (pressure level, time, and temperature) needed to achieve a 5-log reduction of Vibrio parahaemolyticus in live oysters (Crassostrea virginica). Ten strains of V. parahaemolyticus were separately tested for their resistances to high pressure. The two most pressure-resistant strains were then used as a cocktail to represent baro-tolerant environmental strains. To evaluate the effect of temperature on pressure inactivation of V. parahaemolyticus, Vibrio-free oyster meats were inoculated with the cocktail of V. parahaemolyticus and incubated at room temperature (approximately 21 degrees C) for 24 h. Oyster meats were then blended and treated at 250 MPa for 5 min, 300 MPa for 2 min, and 350 MPa for 1 min. Pressure treatments were carried out at -2, 1, 5, 10, 20, 30, 40, and 45 degrees C. Temperatures >/=30 degrees C enhanced pressure inactivation of V. parahaemolyticus. To achieve a 5-log reduction of V. parahaemolyticus in live oysters, pressure treatment needed to be >/=350 MPa for 2 min at temperatures between 1 and 35 degrees C and >/=300 MPa for 2 min at 40 degrees C.