All-solid-state tunable continuous-wave ultraviolet source with high spectral purity and frequency stability

We present a novel approach for the generation of higly frequency-stable, widely tunable, single-frequency cw UV light that is suitable for high-resolution spectroscopy. Sum-frequency generation (SFG) of two solid-state sources with a single cavity resonant for both fundamental waves is employed. Using a highly stable, narrow-linewidth frequency-doubled cw Nd:YAG laser as a master laser and slaving to it the SFG cavity and the other fundamental wave from a Ti:sapphire laser, we generate UV radiation of 33-mW output power around 313 nm. Alternatively, we use a diode laser instead of the Ti:sapphire laser and produce an output power of 2.1 mW at 313 nm. With both setups we obtain a continuous tunability of >15 GHz, short-term frequency fluctuations in the submegahertz range, a long-term frequency drift below 100 MHz/h, and stable operation for several hours. The theory of optimized doubly resonant SFG is also given.     

Reversible acetonitrile-induced inactivation/activation of thermolysin

Thermolysin is catalytically inactive in mixtures of 10-15 % acetonitrile in aqueous buffer. Unexpectedly, dilution of the inactive enzyme with acetonitrile leads to complete recovery of the catalytic activity in a similar way to dilution with aqueous buffer. Circular dichroism and fluorescence studies of thermolysin in the same solvent mixtures reveal discontinuous changes in the overall secondary and tertiary protein structure that correlate well with the reversible differences in catalytic activity. The spectra on either side of the minimum activity point are different from each other, a fact indicating that the enzyme may be able to access two active conformations which are thermodynamically stable in different solvent environments.     

Functional reentry's influence on intracellular calcium in the LRd membrane equations

This paper examines relationships between transmembrane potential (Vm), [Ca2+]i dependent membrane ionic currents, and [Ca2+]i handling by the sarcoplasmic reticulum (SR) in a two-dimensional model of cardiac tissue. Luo-Rudy dynamic (LRd) membrane equations were used because they include detailed formulations for triggered SR Ca2+ release dependent on membrane Ca2+ influx (CICR) and for spontaneous SR Ca2+ release following calsequestrin buffer overload (SCR). Reentry's rapid rate (110-ms cycle length) elevated [Ca2+]i and limited CICR, which in turn promoted SCR that occurred at intervals of 320-350 ms, was preferential at sites located inside the functional center, and destabilized the reentrant activation sequence. Although adjustment of LRd parameters for SR Ca2+ modified SCR interval and peak [Ca2+]i in voltage clamp simulations with a command waveform representing Vm time course within the functional center, SCR persisted. Using the same command waveform, SCR also occurred with an alternate SR Ca2+ formulation that represented subcellular details underlying CICR. LRd parameter adjustments to promote CICR and limit SCR in subsequent reentry simulations failed to eliminate SCR completely, as they modulated SCR intervals in a manner consistent with the voltage clamp simulations. Taken together, our findings support a destabilizing influence of functional reentry on [Ca2+]i handling. However, [Ca2+]i instabilities did not always fractionate depolarization wavefronts during reentry. Fractionation depended, in part, upon CICR and SCR parameters in the LRd formulation for SR Ca2+ release.     

A novel approach to extract colon lumen from CT images for virtual colonoscopy

An automatic method has been developed for segmentation of abdominal computed tomography (CT) images for virtual colonoscopy obtained after a bowel preparation of a low-residue diet with ingested contrast solutions to enhance the image intensities of residual colonic materials. Removal of the enhanced materials was performed electronically by a computer algorithm. The method is a multistage approach that employs a modified self-adaptive on-line vector quantization technique for a low-level image classification and utilizes a region-growing strategy for a high-level feature extraction. The low-level classification labels each voxel based on statistical analysis of its three-dimensional intensity vectors consisting of nearby voxels. The high-level processing extracts the labeled stool, fluid and air voxels within the colon, and eliminates bone and lung voxels which have similar image intensities as the enhanced materials and air, but are physically separated from the colon. This method was evaluated by volunteer studies based on both objective and subjective criteria. The validation demonstrated that the method has a high reproducibility and repeatability and a small error due to partial volume effect. As a result of this electronic colon cleansing, routine physical bowel cleansing prior to virtual colonoscopy may not be necessary.     

Puncture resistance and tensile strength of skin simulants

This study aims ultimately to quantify the force needed to penetrate human tissue. The results will reduce the subjectivity of expert opinion in stabbing incidents. They will also aid clinicians in assessing the severity of injury and help prevent the unnecessary deaths which can occur when this is not fully appreciated. Tensile tests were performed to identify suitable skin simulants with synthetic chamois and pigskin as candidate materials. Quasi-static penetration experiments were also performed in which a knife blade penetrated a skin simulant target. Pigskin was found to be much stronger than chamois under tensile load yet the puncture resistance was almost identical for the two materials.     

Determination of end groups of synthetic polymers by matrix-assisted laser desorption/ionization: high-energy collision-induced dissociation

Matrix-assisted laser desorption/ionization has been combined with high-energy collision-induced dissociation for the analysis of poly(ethylene glycols) with butanoyl, benzoyl and acetyl end groups, using novel technology comprising a magnetic-sector mass spectrometer and ion buncher with an in-line quadratic-field ion mirror. High-energy (>8 keV) collision-induced dissociation facilitated unambiguous end-group determination of these polymers, providing masses of end groups and structural information. The high-energy collision-induced dissociation also provided information regarding repeat units.     

The Rose model, revisited

In 1946 and 1948, three very important papers by Albert Rose [J. Soc. Motion Pict. Eng. 47, 273 (1946); J. Opt. Soc. Am. 38, 196 (1948); L. Marton, ed. (Academic, New York, 1948)] were published on the role that photon fluctuations have in setting fundamental performance limits for both human vision and electronic imaging systems. The papers were important because Rose demonstrated that the performance of imaging devices can be evaluated with an absolute scale (quantum efficiency). The analysis of human visual signal detection used in these papers (developed before the formal theory of signal detectability) was based on an approach that has come to be known as the Rose model. In spite of its simplicity, the Rose model is a very good approximation of a Bayesian ideal observer for the carefully and narrowly defined conditions that Rose considered. This simple model can be used effectively for back-of-the-envelope calculations, but it needs to be used with care because of its limited range of validity. One important conclusion arising from Rose's investigations is that pixel signal-to-noise ratio is not a good figure of merit for imaging systems or components, even though it is still occasionally used as such by some researchers. In the present study, (1) aspects of signal detection theory are presented, (2) Rose's model is described and discussed, (3) pixel signal-to-noise ratio is discussed, and (4) progress on modeling human noise-limited performance is summarized. This study is intended to be a tutorial with presentation of the main ideas and provision of references to the (dispersed) technical literature.     

Good vibrations: tactile feedback in support of attention allocation and human-automation coordination in event-driven domains

Observed breakdowns in human-machine communication can be explained, in part, by the nature of current automation feedback, which relies heavily on focal visual attention. Such feedback is not well suited for capturing attention in case of unexpected changes and events or for supporting the parallel processing of large amounts of data in complex domains. As suggested by multiple-resource theory, one possible solution to this problem is to distribute information across various sensory modalities. A simulator study was conducted to compare the effectiveness of visual, tactile, and redundant visual and tactile cues for indicating unexpected changes in the status of an automated cockpit system. Both tactile conditions resulted in higher detection rates for, and faster response times to, uncommanded mode transitions. Tactile feedback did not interfere with, nor was its effectiveness affected by, the performance of concurrent visual tasks. The observed improvement in task-sharing performance indicates that the introduction of tactile feedback is a promising avenue toward better supporting human-machine communication in event-driven, information-rich domains.     

Residual analysis in random regressions using SAS and S-PLUS

A program package RRAP: Random Regression Residual Analysis Program using SAS [1] and S-PLUS [2] is available for performing random regression residual analysis. The PROCEDURE MIXED from SAS is used for statistical inference. Both elementary-level and individual-level residuals are used. The S-PLUS programs provide: (1) a transformation to orthogonalize the elementary-level correlated residuals for standard regression residual analyses; and (2) several statistics and plots for checking model assumptions, assessing model fitting and detecting outlying individuals. RRRAP starts with a SAS Macro RRRAPMAC on the data followed by a S-PLUS Program DoRRRAP on a UNIX system.