Dynamic behaviour of a magnetically actuated floating liquid marble

This paper reports the dynamic behaviour of a magnetically actuated floating liquid marble by analysing the oscillation of the marble. A liquid marble is a liquid droplet coated with hydrophobic powder. Magnetite particles inside the marble make it magnetic. The marble floats on a carrier liquid that contains aqueous glycerol of various concentrations. A permanent magnet located under the carrier liquid drives the floating marble with the initial velocity. Stopping the magnet abruptly causes the marble to oscillate around its final position for a few seconds. The oscillation was recorded and analysed using customised image processing and evaluation software. The damped harmonic motion model was then applied to the data and tested. Subsequently, critical parameters of the system such as the initial displacement, friction correction factor, the apparent frequency and the spring constant were determined and discussed. The simple experimental set-up and convenient theoretical approach allow us to characterise the marble motion under the influence of a magnet with good accuracy.     

Dynamic diamond anvil cell (dDAC): a novel device for studying the dynamic-pressure properties of materials

We have developed a unique device, a dynamic diamond anvil cell (dDAC), which repetitively applies a time-dependent load/pressure profile to a sample. This capability allows studies of the kinetics of phase transitions and metastable phases at compression (strain) rates of up to 500 GPa/s (approximately 0.16 s(-1) for a metal). Our approach adapts electromechanical piezoelectric actuators to a conventional diamond anvil cell design, which enables precise specification and control of a time-dependent applied load/pressure. Existing DAC instrumentation and experimental techniques are easily adapted to the dDAC to measure the properties of a sample under the varying load/pressure conditions. This capability addresses the sparsely studied regime of dynamic phenomena between static research (diamond anvil cells and large volume presses) and dynamic shock-driven experiments (gas guns, explosive, and laser shock). We present an overview of a variety of experimental measurements that can be made with this device.     

Spinal neurilemmomas and neurofibromas: central dot sign in postgadolinium MRI

The MR studies of three histologically proven spinal neurilemmomas and neurofibromas were reviewed retrospectively. There were two benign neurilemmomas (schwannomas) and one neurofibroma. The common characteristic of these cases was a central low intensity focus ("dot") seen on postcontrast T1-weighted imaging. The low intensity foci corresponded histologically to a congeries of changes including edema, microcysts, foam cells, hyalinization of blood vessels, old hemorrhage, and dystrophic calcification.     

Simultaneous nonlinear absorption and index effects in the propagation of intense TEA CO2 laser pulses through CDF3

Changes in the beam profile of the CO2 laser 10R(26) line, caused by transmission through, and absorption by, CDF3 were studied using an array of pyroelectric detectors. During the propagation of the laser beam through CDF3, nonlinear absorption and self-defocusing of the beam have both been determined from measurements of the effect on the exit beam of fluence, radiant energy, CDF3 pressure, transmission cell length, and distance from the exit of the cell to the detector array.     

Creep of CaO/MgO refractories

The creep properties of a standard doloma brick (containing 40% MgO) and a magnesia-enriched doloma product (containing 60% MgO) have been compared with the behaviour of CaO-MgO samples having compositions and microstructures similar to those of the pellet raw materials used for manufacture of the fired doloma refractories. The creep strength is shown to be improved not only by magnesia enrichment but also by reducing the impurity levels, particularly the Fe₂O₃ content.     

Thermal shock of ß-alumina with zirconia additions

Sodium-alumina electrolyte tubes were prepared from spray dried precursor powders with additions of 2, 5, 10 and 15 wt % ZrO₂ made by the sodium zirconate route. The thermal shock behaviour of ring segments cut from the tubes was examined by quenching into water at 0° C. At the 2% ZrO₂ level the dispersed ZrO₂ particle size was low, <0.5m, and the tetragonal phase was retained. For higher weight fractions, particle coarsening during the-alumina sintering schedule was extensive and the large particles transformed to monoclinic on cooling. At the 15% ZrO₂ level the-alumina had a slightly reduced strength and high resistance to thermal shock and to thermal shock damage, quenching into water from 800° C effecting only a 43% reduction in strength. These observations are consistent with the effects of microcracking in the vicinity of second phase ZrO₂ particles.     

"Indianism" and MMPI scores of men alcoholics

Mean MMPI profiles of 40 Indian and 40 White veterans were similar, but "Indianism," as measured by the Indian Culturalization Test, was significantly related to scores on Hs, Hy, Pt and Sc scales. Caution is advised in using the MMPI in the diagnosis of Indians' psychiatric problems.     

Mode matching for a passive resonant ring laser gyroscope

An analytical method of matching the mode of an input laser to the lowest-order mode of a passive resonant ring laser gyro is described, as are the steps in determining the location and focal length of cylindrical mode matching lenses. Results were obtained with no mode matching, with a compromise spherical lens, with horizontal mode matching only, and with the proper cylindrical mode matching lenses. Compared with no mode matching, the latter case shows that the amplitude of the lowest-order mode is increased approximately 2.5 times. In addition, the number and intensity of higher-order modes are reduced to near zero, and the relative intensity of the lowest-order mode to the higher-order mode increased from approximately 5 to approximately 60 times greater.