Mechanical and structural characterization of the Nicalon silicon carbide fibre

The Nicalon SiC fibre offers the possibility of the development of composite materials for use above 1000° C. This study has compared two types of Nicalon fibre, one which was shown to be amorphous and the other microcrystalline with a SiC grain radius of 1.7 nm. Both fibres behaved in a brittle manner when tested in air and in argon up to 1300° C and their strengths fell above 1000° C. There were indications that new defects were created in the amorphous fibre when tested in air above 1000° C. The microstructural analysis showed that as well as SiC, both SiO₂ and free carbon were present in both fibres. The segregations of free carbon had a mean radius of 2.0 nm in the amorphous fibre and were grouped into two populations of 1.5 and 2.2 nm in the microcrystalline fibre.     

"Indianism" and MMPI scores of men alcoholics

Mean MMPI profiles of 40 Indian and 40 White veterans were similar, but "Indianism," as measured by the Indian Culturalization Test, was significantly related to scores on Hs, Hy, Pt and Sc scales. Caution is advised in using the MMPI in the diagnosis of Indians' psychiatric problems.     

Conflict-preserving abstraction of discrete event systems using annotated automata

This paper proposes to enhance compositional verification of the nonblocking property of discrete event systems by introducing annotated automata. Annotations store nondeterministic branching information, which would otherwise be stored in extra states and transitions. This succinct representation makes it easier to simplify automata and enables new efficient means of abstraction, reducing the size of automata to be composed and thus the size of the synchronous product state space encountered in verification. The abstractions proposed are of polynomial complexity, and they have been successfully applied to model check the nonblocking property of the same set of large-scale industrial examples as used in related work.     

Wafer-level fabrication process for fully encapsulated micro-supercapacitors with high specific energy

In this paper a wafer-level process is proposed to fully integrate carbon-based micro-supercapacitor onto silicon substrate. This process relies on the deposition of a paste containing carbon, PVDF and acetone into cavities etched in silicon. After electrolyte deposition in a controlled atmosphere, a wafer-level encapsulation is realized. Cyclic voltammetry performed on non-encapsulated micro-components showed specific energy of 257 mJ cm⁻² for 336 μm deep cavities. The specific encapsulation process developed was tested separately and proved to be efficient in terms of resistance to organic electrolytes and mechanical strength.     

Stochastic distribution of the required coefficient of friction for level walking--an in-depth study

This study investigated the stochastic distribution of the required coefficient of friction (RCOF) which is a critical element for estimating slip probability. Fifty participants walked under four walking conditions. The results of the Kolmogorov-Smirnov two-sample test indicate that 76% of the RCOF data showed a difference in distribution between both feet for the same participant under each walking condition; the data from both feet were kept separate. The results of the Kolmogorov-Smirnov goodness-of-fit test indicate that most of the distribution of the RCOF appears to have a good match with the normal (85.5%), log-normal (84.5%) and Weibull distributions (81.5%). However, approximately 7.75% of the cases did not have a match with any of these distributions. It is reasonable to use the normal distribution for representation of the RCOF distribution due to its simplicity and familiarity, but each foot had a different distribution from the other foot in 76% of cases. PRACTITIONER SUMMARY: The stochastic distribution of the required coefficient of friction (RCOF) was investigated for use in a statistical model to improve the estimate of slip probability in risk assessment. The results indicate that 85.5% of the distribution of the RCOF appears to have a good match with the normal distribution.     

A study on the rate of degradation of the bioabsorbable polymer polyglycolic acid (PGA)

As part of a study to characterise bioabsorbable scaffolds for tissue engineering an investigation has been conducted into the rate of degradation of polyglycolic acid (PGA). This is one of the most commonly used bioabsorbable materials and has been used in sutures since the 60s and more recently in cell scaffolds, drug delivery devices and bone fixation pins. This study looks at the influence that surface-to-volume ratio i.e. thickness of material, has on degradation. By degrading various thicknesses of PGA in a buffer saline solution over 24 days and testing their properties at regular intervals, a knowledge of how surface-to-volume ratio affects degradation was developed. Properties such as weight loss, crystallinity, molecular weight and structural integrity were measured. Results showed that rate of mass loss was dependent on sample thickness but crystallinity, melting point and molecular weight were independent of thickness.     

Drawing of optical fiber with internal codrawn wire and conductive coating and electrooptic modulation demonstration

One hundred twenty meters of fiber with an internal codrawn wire and electrically conductive coating was successfully fabricated for the first time. The integration of the conductive coating and wire was all performed during the fiber draw stage, in a process that enabled arbitrarily long lengths of fiber to be made. The wire combined with the conductive coating enables a strong electric field to be formed across the optical core. Such a fiber is ideal for thermally poling long lengths and for nonlinear device applications such as optical switches and modulators.     

Comparisons of computed mobile phone induced SAR in the SAM phantom to that in anatomically correct models of the human head

The specific absorption rates (SAR) determined computationally in the specific anthropomorphic mannequin (SAM) and anatomically correct models of the human head when exposed to a mobile phone model are compared as part of a study organized by IEEE Standards Coordinating Committee 34, Sub-Committee 2, and Working Group 2, and carried out by an international task force comprising 14 government, academic, and industrial research institutions. The detailed study protocol defined the computational head and mobile phone models. The participants used different finite-difference time-domain software and independently positioned the mobile phone and head models in accordance with the protocol. The results show that when the pinna SAR is calculated separately from the head SAR, SAM produced a higher SAR in the head than the anatomically correct head models. Also the larger (adult) head produced a statistically significant higher peak SAR for both the 1- and 10-g averages than did the smaller (child) head for all conditions of frequency and position.