Synthesis and film properties of epoxy esters modified with amino resins from glycolysis products of postconsumer PET bottles

Glycolysis of waste polyethylene terephthalate (PET) flakes obtained from grinding postconsumer bottles was carried out at 225–250°C and molar ratios of PET/ethylene glycol were taken as 1/1, 1/1.5, 1/5, and 1/10. Reaction product was extracted by hot water for three times and water‐soluble crystallizable fraction and water‐insoluble fraction were obtained. These fractions were characterized by acid and hydroxyl value determinations, differential scanning calorimeter analysis, and ¹H‐NMR analysis. Glycolysis product was used for synthesis of PET‐based epoxy resin. This epoxy resin was used to prepare epoxy ester resins having 40% and 50% oil content. Epoxy ester resin having 40% oil content was modified with urea‐formaldehyde and melamine‐formaldehyde resins for synthesis of epoxy ester–amino resin. Physical and chemical film properties of epoxy ester and modified epoxy ester resins were investigated. All the epoxy ester and modified epoxy ester films were having excellent adhesion, water, and salt water resistance properties. Modification of PET‐based epoxy ester resins with amino resin has significantly improved hardness, impact resistance, and alkaline and acid resistance of resin films. As a result, PET oligomers obtained from glycolysis of postconsumer PET bottles are suitable for manufacturing of amino‐resin‐modified epoxy ester resins that have improved physical and chemical surface coating properties. POLYM. ENG. SCI., 55:2519–2525, 2015. © 2015 Society of Plastics Engineers     

Transport properties of natural gas through polyethylene nanocomposites at high temperature and pressure

Four titanium(IV) alkoxides, namely: Ti(IV) n-propoxide (1), Ti(IV) n-butoxide (2), Ti(IV) tert-butoxide (3), and Ti(IV) 2-ethylhexoxide (4), have been used as initiators in the bulk ring-opening polymerization (ROP) of ??-caprolactone (??-CL). The influence of the alkoxide group on the course of the ROP of ??-CL was investigated by means of ¹H-NMR and differential scanning calorimetry (DSC). The ¹H-NMR spectra confirmed that the ROP reaction of ??-CL proceeded via the widely accepted coordination-insertion mechanism for each of the four initiators. Isoconversional methods have been used to evaluate non-isothermal DSC data via the equations of Friedman, Kissinger-Akahira-Sunose (KAS) and Ozawa-Flynn-Wall (OFW). The kinetic studies showed that the polymerization rate for the four initiators (1-4) was in the order of 1?>?2????4?>?3. The lowest activation energies (40?C47, 42?C44, and 49?C52?kJ/mol for the Friedman, KAS and OFW methods respectively) were found in the polymerizations using Ti(IV) n-propoxide (1), while the highest activation energies (84?C107, 77?C87, and 80?C91?kJ/mol for the Friedman, KAS and OFW methods respectively) were obtained using Ti(IV) tert-butoxide (3). Differences in the rates of polymerization and the activation energies amongst the four initiators appeared to be governed mainly by the different degrees of steric hindrance in the initiator structure. These results represent important findings regarding the steric influence of the alkoxide groups on the kinetics of the ROP of ??-CL initiated by titanium(IV) alkoxides.     

Industrial experience in the scale-up of reactive distillation with examples from C4-chemistry

The objective of this paper is to illustrate process design from the industrial point of view for a heterogeneous reactive distillation exemplified by the decomposition of MTBE. Based on thermodynamics a plausible column concept is suggested. Open questions concerning scale-up of structured catalytic packings are discussed on the basis of experiments in the lab and pilot plant scale. Lab scale experiments were modelled satisfactorily with an equilibrium stage approach. In order to perform the scale-up from lab to pilot scale with the equilibrium stage approach the reaction rate constant had to be reduced significantly. Incomplete catalyst wetting due to maldistribution effects or mass transfer phenomena might be possible reasons.     

Gasification reactivity of charcoal with CO2. Part I: Conversion and structural phenomena

The gasification reaction of fir charcoal with CO₂ was studied by isothermal thermogravimetric analysis under kinetic control. The derived reaction rate (r=dX/dt) as a function of the converted carbon mass (X) was compared with random pore model predictions and found to be much higher at elevated conversion levels than predicted by theory. Similar enhanced reaction rate behaviour was evidenced after removing the natural alkali catalyst from the charcoal by acid washing, suggesting that with untreated charcoal the late reaction rate contribution stems from both, catalytic and additional structure effects. Literature attributes the unpredicted late reaction rate behaviour to the disintegration of the porous char particle into small fragments, which, in line with percolation theory predictions, seems to occur only after a critical conversion level has been reached. However, our gasification data reveal a gradual rise in the charcoal reactivity thereafter, suggesting a breaking up (embrittlement) of the solid phase accompanied by the exposure of fresh surface area from fracturing. The original random pore model derivation given by Bhatia and Perlmutter is extended to account also for these peculiarities and the resulting kinetic relation described our reaction rate data well over the entire conversion range.     

Butyltin(IV) Benzoates: Inhibition of Thioredoxin Reductase,Tumor Cell Growth Inhibition,and Interactions with Proteins

Thioredoxin reductase (TrxR) is overexpressed in cancer cells and is therefore a putative cancer target. Inhibition of this enzyme is considered an important strategy for the development of new chemotherapeutic agents with a specific mechanism of action. Organotin compounds have been described as experimental antitumor agents, yet their mechanism of action remains largely unknown. Based on the outcome of a virtual screening study, various di‐ and tri‐n‐butyltin(IV) carboxylates were synthesized, and their biological properties were evaluated. All synthesized compounds were able to inhibit TrxR selectively within the micromolar range and showed potent antitumor activity against HT‐29 and MCF‐7 cancer cell lines. Moreover, tin(IV) organometallics were found to strongly induce apoptosis in the BJAB lymphoma cell line. Mass spectrometry and atomic absorption spectroscopy experiments revealed metal binding to proteins, and efficient cellular uptake was observed using a di‐n‐butyltin(IV) complex as an example.     

Comparison of microleakage of a multi-mode adhesive system with contemporary adhesives in class II resin restorations

Aim: The aim was to compare the microleakage of resin composite bonded with different adhesive systems in class-II cavities at enamel or dentine margins. Material and methods: 60 extracted human molar teeth received slot cavity preparations on mesial and distal surfaces (mesial cervical margin was prepared in enamel and distal in dentine). They were randomly divided into five groups (n?=?12) according to the adhesive system: Group-A: Silorane Bond (S), Group-B: Adper Single Bond 2 (SB), Group-C: Clearfil SE Bond (CSE), Group-D: Single Bond Universal (USel) (selective etch-and-rinse), Group-E: Single Bond Universal (USE) (all-in-one). The preparations were restored using the same resin composite (Filtek Ultimate) except Group A which was restored by Silorane composite. The teeth were thermocycled, immersed in dye, sectioned, and dye penetration was evaluated quantitatively using image analysis. The data were analyzed using the two-way analysis of variance and Bonferroni test. Results: In all groups, there was no statistically significant difference between enamel margins at occlusal and gingival sites (p?>?0.05). The statistical difference between Group-A (S) and Group-B (SB) was significant at all margins. Group-B (SB) presented the greatest microleakage amounts at all margins and the highest scores were obtained in the dentine. Likewise, SB demonstrated statistically significant differences between dentine and enamel margins (occlusal and gingival)(p?<?0.05). Conclusion: All adhesive systems showed similar microleakage values between enamel margins in occlusal and gingival regions. However, when the gingival margin is located in the dentine, etch&rinse adhesive systems may not be a choice in terms of microleakage prevention.