Beneficiation routes for upgrading iron ore tailings with a teetered bed separator

The aim of this study was to investigate the possibility of producing sinter/pellet grade concentrate from iron ore tails. Two different wet flow sheets were considered. The first consists of a teetered bed separator (TBS) followed by a gravity concentration resulting in a product quality with 65.54% Fe, 4.96% SiO₂ and 1.50% Al₂O₃ content ensuring 68.52% iron recovery. In the second option, the iron ore tail is treated in a similar approach, but the gravity concentration replaced by magnetic separation results in a product quality with 65.34% Fe, 3.70% SiO₂ and 1.00% Al₂O₃ with 70.91% of iron recovery.     

Properties of biodegradable PVA/sepiolite‐based nanocomposite fiber mats

In this study, poly(vinyl alcohol) (PVA) nanocomposite fiber mats with sepiolite were prepared via electrospinning technique. The measurements of fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), contact angle, scanning electron microscopy (SEM), and atomic force microscopy (AFM) were used for the characterization. The effect of polymer/sepiolite ratio and heat treatment on the properties of samples was investigated. The heat treatment which decreased the solubility of nanofibers and the addition of sepiolite resulted in a decrease in nanofiber diameter, contact angle with water, and water drop spreading rate on the material, and also resulted in an increase in water drop spreading rate inside the material. POLYM. COMPOS., 36:2334–2342, 2015. © 2014 Society of Plastics Engineers     

Heat transfer enhancement in a slot channel via a transversely oscillating adiabatic circular cylinder

Heat transfer enhancement in a uniformly heated slot channel due to vortices shed from a transversely oscillating adiabatic circular cylinder is investigated. Effects of the cylinder motion and vortex shedding on heat transfer are systematically assessed by varying the cylinder oscillation frequency from 75% to 125% of the natural vortex shedding frequency of a fixed cylinder within the same domain. Numerical simulations at Re = 100 and 0.1 ? Pr ? 10 are performed using spectral element discretization of Navier-Stokes and energy equations in a moving domain based on an arbitrary Lagrangian-Eulerian formulation. Results within the thermally developing flow region show heat transfer enhancement due to the placement of a stationary cylinder compared to the straight channel case. Transverse oscillations of the cylinder further increase the wall heat transfer coefficient. Pumping power in the channel and the power necessary to oscillate the cylinder is also provided for comparisons. Cylinder oscillations with 75% of the natural vortex shedding frequency is shown to yield the best results with only 10% more power to pump the fluid, compared with the fixed cylinder case.     

A statistical analysis of wind power density based on the Weibull and Rayleigh models at the southern region of Turkey

The electric generating capacity of Turkey must be tripled by 2010 to meet Turkey’s electric power consumption, if the annual 8% growth in electric power consumption continues. Turkey has to make use of its renewable energy resources, such as wind and solar, not only to meet the increasing energy demand, but also for environmental reasons. Studies show that Iskenderun (36°35′N; 36°10′E) located on the Mediterranean coast of Turkey is amongst the possible wind energy generation regions. In the present study, the wind energy potential of the region is statistically analyzed based on 1-year measured hourly time-series wind speed data. The probability density distributions are derived from time-series data and distributional parameters are identified. Two probability density functions are fitted to the measured probability distributions on a monthly basis. The wind energy potential of the location is studied based on the Weibull and the Rayleigh models.     

Fatty acid composition and sensory properties of Wels catfish (Silurus glanis) hot smoked with different sawdust materials

This study aims to compare chemical, physical and sensorial parameters of the Wels catfish (Silurus glanis), hot smoked using vine, poplar, lemon tree and oak sawdust as well as corncob. Significant differences (P < 0.05) in proximate composition were found between fresh and smoked samples; however, the changes in fatty acid composition were less significant. In the fatty acid composition of control group, monounsaturated fatty acids (41.60%) had the highest share in fatty acids, which was followed by saturated fatty acids (29.95%) and polyunsaturated fatty acids (28.34%). The major fatty acids were observed to be C16:0, C18:0; C16:1 n‐7, C18:1 n‐9c, C18:1 n‐9t and C18:2 n6c. There were significant differences (P < 0.05) between the groups considering their colour measurement results. General preference criteria such as appearance, odour, texture, colour and taste were chosen for the sensorial analysis, which were rated by the panellists. According to the results of overall appearance, the fillet pieces smoked with lemon tree (9.00), poplar (8.66), corncob (8.00), oak (7.33) and vine (5.33) sawdust were determined as the most preferred, in order.     

An integrated decision aid extension to material selection problem

Choice of an adequate material in design process is one of the critical tasks for the relevant decision-makers. At this insight, the consistency of the decisions is extremely depending on the relevance of adapted techniques to the nature of different problem cases. This paper proposed an integrated decision aid (IDEA) to match the suitable techniques with different problem cases based on the following six dimensions: (i) the type of the decision problem, (ii) the size of the problem, (iii) selection of the preference techniques by decision-makers, (iv) decision-makers’ preference structure, (v) the necessity for the use of relative importance, (vi) the nature of performance values. Furthermore, the implementation procedure of the proposed IDEA for a material selection problem is demonstrated with the previously cited applications from material science literature. Hereafter, it is expected that the IDEA provides great advantages and encouragements to researchers/practitioners in order to prevent excessive time consuming, probable misapplications, and the other challenging issues in multiple criteria analysis of material selection problems.     

The sizes of peptides generated from protein by mammalian 26 and 20 S proteasomes. Implications for understanding the degradative mechanism and antigen presentation

Knowledge about the sizes of peptides generated by proteasomes during protein degradation is essential to fully understand their degradative mechanisms and the subsequent steps in protein turnover and generation of major histocompatibility complex class I antigenic peptides. We demonstrate here that 26 S and activated 20 S proteasomes from rabbit muscle degrade denatured, nonubiquitinated proteins in a highly processive fashion but generate different patterns of peptides (despite their containing identical proteolytic sites). With both enzymes, products range in length from 3 to 22 residues, and their abundance decreases with increasing length according to a log-normal distribution. Less than 15% of the products are the length of class I presented peptides (8 or 9 residues), and two-thirds are too short to function in antigen presentation. Surprisingly, these mammalian proteasomes, which contain two "chymotryptic," two "tryptic," and two "post-acidic" active sites, generate peptides with a similar size distribution as do archaeal 20 S proteasomes, which have 14 identical sites. Furthermore, inactivation of the "tryptic" sites altered the peptides produced without significantly affecting their size distribution. Therefore, this distribution is not determined by the number, specificity, or arrangement of the active sites (as proposed by the "molecular ruler" model); instead, we propose that proteolysis continues until products are small enough to diffuse out of the proteasomes.     

The effectiveness of early endoscopy for upper gastrointestinal hemorrhage: a community-based analysis

OBJECTIVES: The effectiveness of upper endoscopy in unselected patients with upper gastrointestinal hemorrhage has not been well studied. This study was undertaken to identify factors associated with the performance of early endoscopy (ie, within 1 day of hospitalization) and, after adjusting for these factors, to determine associations between early endoscopy and in-hospital mortality, length of stay, and performance of surgery. METHODS: Subjects in this observational cohort study were 3,801 consecutive admissions with upper gastrointestinal hemorrhage to 30 hospitals in a large metropolitan region. Demographic and clinical data were abstracted from hospital records. A multivariable model based on factors that potentially could relate to the decision to perform endoscopy was developed to determine the propensity (0 to 100%) for early endoscopy in each patient. RESULTS: Early endoscopy was performed in 2,240 patients (59%), and although it was not associated with mortality after adjusting for severity of illness among all patients, it was associated with a higher risk of death for patients in the lowest propensity group. Early endoscopy was associated with a lower likelihood of upper gastrointestinal surgery in all patients and in the two highest propensity groups and with a shorter length of stay in the entire cohort and in all subgroups. CONCLUSIONS: In the absence of specific contraindications, early endoscopy should be considered because of associated reductions in length of stay and surgical intervention. Further studies are needed to identify subgroups in whom the procedure may be associated with adverse effects on survival.