Chemical synthesis of a dual branched malto-decaose: a potential substrate for alpha-amylases

A convergent block strategy for general use in efficient synthesis of complex alpha-(1-->4)- and alpha-(1-->6)-malto-oligosaccharides is demonstrated with the first chemical synthesis of a malto-oligosaccharide, the decasaccharide 6,6'-bis(alpha-maltosyl)-maltohexaose, with two branch points. Using this chemically defined branched oligosaccharide as a substrate, the cleavage pattern of seven different alpha-amylases were investigated. Alpha-amylases from human saliva, porcine pancreas, barley alpha-amylase 2 and recombinant barley alpha-amylase 1 all hydrolysed the decasaccharide selectively. This resulted in a branched hexasaccharide and a branched tetrasaccharide. Alpha-amylases from Asperagillus oryzae, Bacillus licheniformis and Bacillus sp. cleaved the decasaccharide at two distinct sites, either producing two branched pentasaccharides, or a branched hexasaccharide and a branched tetrasaccharide. In addition, the enzymes were tested on the single-branched octasaccharide 6-alpha-maltosyl-maltohexaose, which was prepared from 6,6'-bis(alpha-maltosyl)-maltohexaose by treatment with malt limit dextrinase. A similar cleavage pattern to that found for the corresponding linear malto-oligosaccharide substrate was observed.     

Initial scalar lithospheric magnetic anomaly map of China and surrounding regions derived from CSES satellite data

Science China Technological Sciences - The China Seismo-Electromagnetic Satellite (CSES), China’s first satellite to measure geophysical fields with scientific goals in both space and solid...     

Sequestration of Host Plant Glucosinolates in the Defensive Hemolymph of the Sawfly Athalia rosae

Interactions between insects and glucosinolate-containing plant species have been investigated for a long time. Although the glucosinolate–myrosinase system is believed to act as a defense mechanism against generalist herbivores and fungi, several specialist insects use these secondary metabolites for host plant finding and acceptance and can handle them physiologically. However, sequestration of glucosinolates in specialist herbivores has been less well studied. Larvae of the turnip sawfly Athalia rosae feed on several glucosinolate-containing plant species. When larvae are disturbed by antagonists, they release one or more small droplets of hemolymph from their integument. This reflex bleeding is used as a defense mechanism. Specific glucosinolate analysis, by conversion to desulfoglucosinolates and analysis of these by high-performance liquid chromatography coupled to diode array UV spectroscopy and mass spectrometry, revealed that larvae incorporate and concentrate the plant's characteristic glucosinolates from their hosts. Extracts of larvae that were reared on Sinapis alba contained sinalbin, even when the larvae were first starved for 22 hr and, thus, had empty guts. Hemolymph was analyzed from larvae that were reared on either S. alba, Brassica nigra, or Barbarea stricta. Leaves were analyzed from the same plants the larvae had fed on. Sinalbin (from S. alba), sinigrin (B. nigra), or glucobarbarin and glucobrassicin (B. stricta) were present in leaves in concentrations less than 1 mol/g fresh weight, while the same glucosinolates could be detected in the larvae's hemolymph in concentrations between 10 and 31 mol/g fresh weight, except that glucobrassicin was present only as a trace. In larval feces, only trace amounts of glucosinolates (sinalbin and sinigrin) could be detected. The glucosinolates were likewise found in freshly emerged adults, showing that the sequestered phytochemicals were transferred through the pupal stage.     

Dynamic delayed detached eddy simulation of a multi‐inlet vortex reactor

The multi‐inlet vortex reactor (MIVR) is used for flash nanoprecipitation to manufacture functional nanoparticles. A validated computational fluid dynamics model is needed for the design, scale‐up, and optimization of the MIVR. Unfortunately, available Reynolds‐averaged Navier‐Stokes methods are unable to accurately model the highly swirling flow in the MIVR. Large‐eddy simulations (LES) are also problematic, as excessively fine grids are required to accurately model this flow. These dilemmas led to the application of the dynamic delayed detached eddy simulation (DDES) method to the MIVR. In the dynamic DDES model, the eddy viscosity has a form similar to the Smagorinsky sub‐grid viscosity in LES, which allows the implementation of a dynamic procedure to determine its model coefficient. Simulation results using the dynamic DDES model are found to match well with experimental data in terms of mean velocity and turbulence intensity, suggesting that the dynamic DDES model is a good option for modeling the turbulent swirling flow in the MIVR. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2570–2578, 2016     

Barium titanate‐based nanodielectrics of two chemically recyclable thermosets

In this work was investigated the effect of the addition of barium titanate (BaTiO₃) on electrical properties of two chemically recyclable thermosets, polyhemiaminal (PHA) and polyhexahydro‐s‐triazine (PHT), both fabricated from 4,4′‐oxydianiline (ODA), an ether derivative of aniline and paraformaldehyde. Thermal and mechanical properties as well as chemical recyclability of the two polymers and their nanocomposites/nanodielectrics were also investigated. In addition, a quantitative analysis was conducted of the nanoparticle dispersion in the PHA‐/PHT‐based BaTiO₃‐containing nanocomposites using transmission electron microscopy imaging and the nearest‐neighbor distance index and this index was used to analyze the investigated properties in connection with the proper mechanisms. Regarding the electrical properties for both neat polymers, conductivity values of the order of 10^?8 S m^?1 at 100 Hz were observed and dielectric constant values close to 2.80 for both polymers at 1 kHz. The addition of 0.5 wt% of BaTiO₃ ferroelectric nanoparticles increased by about 44% the dielectric constant (1 kHz) and conductivity (10² Hz) of the PHA‐based nanocomposite. PHA and PHT exhibited glass transition temperature (T_g) values in the range 125–180 °C. An increase of 7 °C in T_g was observed after the incorporation of 0.5 wt% of BaTiO₃ into PHA. Concerning the mechanical properties, values in the range 4.00–4.45 GPa for reduced modulus and 0.30–0.43 GPa for nanohardness for PHA and PHT polymers were observed. Independently of filler content or polymer matrix, both mechanical properties were enhanced after the addition of BaTiO₃. The chemical recycling of PHA/PHT and all nanocomposites in the initial ODA reagent after sulfuric acid treatment was successfully characterized using the NMR and Fourier transform infrared spectroscopic techniques. © 2018 Society of Chemical Industry     

Mechanisms and Kinetics of Liquid Silicon Oxidation During Industrial Refining

During oxidative ladle refining (OLR) of silicon, the metal surface is partly oxidized, resulting in the formation of a condensed silica fume (SiO₂). This fugitive emission of silica represents a potential health hazard to the workers in the silicon and ferrosilicon industry. In the current work, industrial measurement campaigns aimed at recording the fume generation during OLR were performed at the Elkem Salten plant in Norway. The measured amounts of silica produced were 2.5–5.1?kg/h, depending on the gas flow rate in the refining process. The rate of silica production correlates with the total flow rate and amount of air in the purge gas, and increases as the flow rate increases. The results of this work suggest that fume generation during OLR primarily results from oxidation of the exposed metal surface, with oxygen transport from the surrounding atmosphere to the metal surface being the limiting factor. Other identified mechanisms of SiO₂ formation were splashing of the metal and/or oxidation of SiO gas carried with the refining purge gas.     

Active Oxidation of Liquid Silicon: Experimental Investigation of Kinetics

Small scale laboratory experiments on the oxidation of liquid silicon have reproduced important features of the industrial refining of liquid silicon: active oxidation led to the formation of amorphous silica spheres as a reaction product. The boundary condition for active oxidation in terms of maximum oxygen partial pressure in the bulk gas was found to lie between 2·10^?3 and 5·10^?3?atm at T?=?1,500?°C. The active oxidation of liquid silicon had linear kinetics, and the rate was proportional to bulk oxygen partial pressure and the square root of the linear gas flow rate, consistent with viscous flow mass transfer theory. Classical theory for unconstrained flow over a flat plate led to mass transfer rates for SiO_(g) which were 2–3 times slower than observed. However, computational fluid dynamic modeling to take into account the effects of reactor tube walls on flow patterns yielded satisfactory agreement with measured volatilization rates.     

Inorganic precursor peroxides for antifouling coatings

Modern antifouling coatings are generally based on cuprous oxide (Cu₂O) and organic biocides as active ingredients. Cu₂O is prone to bioaccumulation, and should therefore be replaced by more environmentally benign compounds when technically possible. However, cuprous oxide does not only provide antifouling properties, it is also a vital ingredient for the antifouling coating to obtain its polishing and leaching mechanism. In this paper, peroxides of strontium, calcium, magnesium, and zinc are tested as pigments in antifouling coatings. The peroxides react with seawater to create hydrogen peroxide and highly seawater-soluble ions of the metal. The goals have been to establish the antifouling potency of an antifouling coating that releases hydrogen peroxide as biocide, and to investigate the potential use of peroxides as water-soluble polishing and leaching pigments. The investigations have shown that it is possible to identify particulates that, when applied as pigments in antifouling coatings, will provide polishing and leaching rates comparable to those of Cu₂O-based coatings. Furthermore, the combination of polishing and hydrogen peroxide leaching by a coating based on zinc peroxide in a suitable binder matrix provides antifouling properties exceeding those of a similar coating based entirely on zinc oxide.