Use of highly overcoupled couplers to detect shifts in Braggwavelength [strain sensors]

The authors present a technique for detecting Bragg wavelength shifts using highly overcoupled couplers (HOCC). An HOCC of 60%/nm was fabricated with 626 cycles. With our HOCC, a 5 μW LED and a 95% reflective Bragg grating we were able to detect 10 μstrain (Δλ=0.01 nm)     

2DEG base hot electron transistors fabricated using MBE and in situion beam lithography

A vertical hot electron transistor incorporating a two-dimensional electron gas (2DEG) base has been fabricated in the GaAs-AlGaAs materials system. The difficulties caused by the need to form selective ohmic contacts to the different conducting layers have been overcome using a combination of in situ focused ion beam (FIB) isolation and molecular beam epitaxial (MBE) regrowth. This has allowed a high yield of working devices to be achieved with a typical common emitter current gain of h_FE=6 at low temperatures     

Object tracking with particle filtering in fluorescence microscopy images: application to the motion of neurofilaments in axons

Neurofilaments are long flexible cytoplasmic protein polymers that are transported rapidly but intermittently along the axonal processes of nerve cells. Current methods for studying this movement involve manual tracking of fluorescently tagged neurofilament polymers in videos acquired by time-lapse fluorescence microscopy. Here, we describe an automated tracking method that uses particle filtering to implement a recursive Bayesian estimation of the filament location in successive frames of video sequences. To increase the efficiency of this approach, we take advantage of the fact that neurofilament movement is confined within the boundaries of the axon. We use piecewise cubic spline interpolation to model the path of the axon and then we use this model to limit both the orientation and location of the neurofilament in the particle tracking algorithm. Based on these two spatial constraints, we develop a prior dynamic state model that generates significantly fewer particles than generic particle filtering, and we select an adequate observation model to produce a robust tracking method. We demonstrate the efficacy and efficiency of our method by performing tracking experiments on real time-lapse image sequences of neurofilament movement, and we show that the method performs well compared to manual tracking by an experienced user. This spatially constrained particle filtering approach should also be applicable to the movement of other axonally transported cargoes.     

Steve Irwin's Influence on Wildlife Conservation

The present study assesses audience involvement with popular television personality Steve Irwin, who died tragically at the peak of his career. A survey of 1,800 media consumers revealed that Irwin was perceived to be a hero and role model for wildlife conservation. News of his death spread quickly and globally, promoting interpersonal dialoguing and Internet searching. Those more highly involved with Irwin talked with more people and longer about his death, and, as hypothesized, were more likely to increase their support of wildlife conservation. The effects of involvement with Irwin spanned age groups, educational levels, ethnic groups, and gender. Implications of these findings on the international influence of popular celebrities are discussed.     

Investigation of reliability issues in high power laser diode bar packages

As applications continue to demand increasingly higher optical output power and longer lifetime, thermo-mechanical stresses on dissimilar materials interfaced for packaging pose an ever-growing challenge for the realization of a durable system. Particularly important for an epitaxy-down configuration is the die-attachment interface, which is desired to be defect free and stress managed for reliable optical alignment. A knowledge of the changes in the physical defect density and magnitude of the thermo-mechanical stress present in the active region as a function of the fabrication process and aging is crucial to an understanding of the influence of the process parameters and operating conditions on device performance and reliability. In this study, we investigated high power laser diode array packages aged under various conditions. Microscopic defect analyses of the die attachment interface and device stress were carried out using primarily metallography, scanning electron microscopy, scanning acoustic microscopy, microhardness, and micro-Raman spectroscopy. It was noted that the intermetallic compounds and microscopic physical defects at the die attach interface are detrimental to transient heat transfer, and thus, overall package reliability. Using micro-Raman spectroscopy, we found that tensile stress near the bar-package interface increases with aging for the first few hundred hours and then decreases with further aging.     

Preservation of refrigerated meats with controlled atmospheres: Treatment and post-treatment effects of carbon dioxide on pork and beef

Whole pork loins were divided into roasts and subjected to air control and carbon dioxide enriched atmospheres at 1°C for up to 21 days. Quintuplicate samples of both control and carbon dioxide treated loins were transferred to air storage at 0,4,7, 14 and 21 days and further held for 0, 3(4), 7 and 10 days at 4°C. Microbiological counts were taken at all time permutations. The results indicated a strong inhibiting effect of the carbon dioxide atmosphere on microbial growth as well as a marked residual effect during post-treatment storage in air. Satisfactory colour and odour were maintained on the loins for extended storage times, with visual and olfactory deterioration preceding microbial spoilage. Beef round wedges were treated in a similar manner. Although bacterial spoilage inhibition was comparable, colour degeneration was rapid and severe, making the method unsuitable for treatment of finished beef cuts.     

PROPOSALS FOR THE EFFICIENT AND ECONOMICAL USE OF HOPS IN BREWING

The hop lupulin glands, which contain the essential oils and resin acids, can be separated effectively from the bulky and worthless bracts and residues in a mechanical process which avoids solvent contamination. The separation is accomplished in an air stream through a centrifugal sifter after the lupulin has been rubbed off in a disc pin mill. The separated lupulin can be broken open by grinding in a colloid mill and used to obtain a dry hop aroma in beers by an ‘instant’ process. The lupulin can be used to bitter beers either directly in the copper or in a pre-boiling process. It can also be used in an aqueous extraction process to yield, nearly quantatively, pure and separate extracts of the α- and β-acids. The α-acids can then be isomerized almost quantitatively and the β-acids can be oxidized to give a 50% yield of hulupones. The hop residues, when boiled with wort, give an approximately 50% utilization of the remaining α-acids. These isohumulones can then be enhanced by those obtained from the extracted α-acids and the bitterness can be supplemented by the hulupones obtained from the β-acids. Overall, this process is calculated to give a bitterness utilization equivalent to 87% calculated on the original α-acids.     

SMOS Calibration

The calibration of the Soil Moisture and Ocean Salinity (SMOS) payload instrument, known as Microwave Imaging Radiometer by Aperture Synthesis (MIRAS), is based on characterization measurements which are performed initially on-ground prior to launch and, subsequently, in-flight. A good calibration is a prerequisite to ensure the quality of the geophysical data. The calibration scheme encompasses both the spaceborne instrument and the ground data processing. Once the system has been calibrated, the instrument performance can be verified, and the higher level geophysical variables, soil moisture and ocean salinity, can be validated. In this paper, the overall calibration approach is presented, focusing on the main aspects relevant to the SMOS instrument design and mission requirements. The distributed instrument, comprising 72 receivers, leads to a distributed internal calibration approach supported by specific external calibration measurements. The relationship between the calibration data and the routine ground processing is summarized, demonstrating the inherent link between them. Finally, the approach to the in-flight commissioning activities is discussed.     

Effect of Al Composition and Gate Recess on Power Performance of AlGaN/GaN High-Electron Mobility Transistors

AlGaN/GaN high-electron mobility transistors with different Al compositions and barrier thicknesses were compared. The samples with higher Al composition and similar 2D electron gas density showed higher gate leakage, utilizing a slant field plate gate process. By applying a gate recess etch and a slant field plate gate process, gate leakage was improved to a similar level for all the devices, and the power density and PAE were much improved.     

亚太地区卫星正在启用新型业务

对于直接到户(DTH)业务的提供商和其它企业家来说,亚太地区存在着新的机会:高清晰度电视(HDTV)慢慢地进入了这一地区,蜂窝电话回传、因特网协议(IP)宽带和企业领域应用正在加速。所有这些让人明白,亚太地区的各种商业机会将在未来数年里稳步增长。泰国Shin卫星公司新宽带卫星iP