Processing of tomato: impact on in vitro bioaccessibility of lycopene and textural properties

BACKGROUND: Human studies have demonstrated that processing of tomato can greatly increase lycopene bioavailability. However, the difference between processing methods is not widely investigated. In the current study different thermal treatments of tomato were evaluated with regard to their impact on in vitro bioaccessibility and retention of lycopene and β‐carotene as well as textural properties. Thermal treatments used were low (60 °C) and high (90 °C) temperature blanching followed by boiling. RESULTS: Lycopene was relatively stable during thermal treatment, whereas β‐carotene was significantly (P < 0.05) reduced by all heat treatments except for low temperature blanching. In vitro bioaccessibility of lycopene was significantly increased from 5.1 ± 0.2 to 9.2 ± 1.8 and 9.7 ± 0.6 mg kg^?1 for low and high temperature blanching, respectively. An additional boiling step after blanching did not further improve lycopene bioaccessibility for any treatment, but significantly reduced the consistency of low temperature treated samples. CONCLUSION: Choice and order of processing treatments can have a large impact on both lycopene bioavailability and texture of tomato products. Further investigations are needed, but this study provides one of the first steps towards tomato products tailored to optimise nutritional benefits. Copyright © 2010 Society of Chemical Industry     

Evaluation of factors associated with immunoglobulin G,fat, protein,and lactose concentrations in bovine colostrum and colostrum management practices in grassland-based dairy systems in Northern Ireland

The objectives of this study were to investigate colostrum feeding practices and colostrum quality on commercial grassland-based dairy farms, and to identify factors associated with colostrum quality that could help inform the development of colostrum management protocols. Over 1 yr, background information associated with dairy calvings and colostrum management practices were recorded on 21 commercial dairy farms. Colostrum samples (n = 1,239) were analyzed for fat, protein, lactose, and IgG concentration. A subset was analyzed for somatic cell count and total viable bacteria count. Factors associated with nutritional and IgG concentrations were determined using both univariate and multivariate models. This study found that 51% of calves were administered their first feed of colostrum via esophageal tube, and the majority of calves (80%) were fed >2 L of colostrum at their first feed (mean = 2.9 L, SD = 0.79), at a mean time of 3.2 h (SD 4.36) after birth, but this ranged across farms. The mean colostral fat, protein, and lactose percentages and IgG concentrations were 6.4%, 14%, 2.7%, and 55 mg/mL, respectively. The mean somatic cell count and total viable count were 6.3 log₁₀ and 6.1 log₁₀, respectively. Overall, 44% of colostrum samples contained <50 mg/mL IgG, and almost 81% were in excess of industry guidelines (<100,000 cfu/mL) for bacterial contamination. In the multivariate model, IgG concentration was associated with parity and time from parturition to colostrum collection. The nutritional properties of colostrum were associated with parity, prepartum vaccination, season of calving, and dry cow nutrition. The large variation in colostrum quality found in the current study highlights the importance of routine colostrum testing, and now that factors associated with lower-quality colostrum on grassland-based dairy farms have been identified, producers and advisers are better informed and able to develop risk-based colostrum management protocols.     

Persistent UAV Service: An Improved Scheduling Formulation and Prototypes of System Components

The flight duration of unmanned aerial vehicles (UAVs) is limited by their battery or fuel capacity. As a consequence, the duration of missions that can be pursued by UAVs without supporting logistics is restricted. However, a system of UAVs that is supported by automated logistics structures, such as fuel service stations and orchestration algorithms, may pursue missions of conceivably indefinite duration. This may be accomplished by handing off the mission tasks to fully fueled replacement UAVs when the current fleet grows weary. The drained UAVs then seek replenishment from nearby logistics support facilities. To support the vision of a persistent fleet of UAVs pursuing missions across a field of operations, we develop an improved mixed integer linear programming (MILP) model that can serve to support the system’s efforts to orchestrate the operations of numerous UAVs, missions and logistics facilities. Further, we look toward the future implementation of such a persistent fleet outdoors and develop prototype components required for such a system. In particular, we develop and demonstrate the concerted operation of a scheduling model, UAV onboard vision-based guidance system and replenishment stations.     

Tablet PC-based Visual Target-Following System for Quadrotors

This paper proposes a vision-based, closed-loop target-following system for quadrotors. The system consists of a vision-based target detection algorithm that uses the color and image moment of a given target. Flight control commands are directly generated based on the offset of the target from the image frame center. The image processing and control algorithms have been implemented on a latest tablet computer, which is capable of running those algorithms in real time. The proposed system was demonstrated using a commercially available quadrotor platform equipped with a forward-facing camera. Experiments and their analyses showed satisfactory target following performance.     

Analysis of indoor particles and gases and their evolution with natural ventilation

The air composition and reactivity from outdoor and indoor mixing field campaign was conducted to investigate the impacts of natural ventilation (ie, window opening and closing) on indoor air quality. In this study, a thermal desorption aerosol gas chromatograph (TAG) obtained measurements of indoor particle‐ and gas‐phase semi‐ and intermediately volatile organic compounds both inside and outside a single‐family test home. Together with measurements from a suite of instruments, we use TAG data to evaluate changes in indoor particles and gases at three natural ventilation periods. Positive matrix factorization was performed on TAG and adsorbent tube data to explore five distinct chemical and physical processes occurring in the indoor environment. Outdoor‐to‐indoor transport is observed for sulfate, isoprene epoxydiols, polycyclic aromatic hydrocarbons, and heavy alkanes. Dilution of indoor species is observed for volatile, non‐reactive species including methylcyclohexane and decamethylcyclopentasiloxane. Window opening drives enhanced emissions of semi‐ and intermediately volatile species including TXIB, DEET, diethyl phthalate, and carvone from indoor surfaces. Formation via enhanced oxidation was observed for nonanal and 2‐decanone when outdoor oxidants entered the home. Finally, oxidative depletion of gas‐phase terpenes (eg, limonene and α‐pinene) was anticipated but not observed due to limited measurement resolution and dynamically changing conditions.     

Partitioning of PCBs from air to clothing materials in a Danish apartment

Polychlorinated biphenyl (PCB) contamination of buildings continues to pose an exposure threat, even decades after their application in the form of calks and other building materials. In this research, we investigate the ability of clothing to sorb PCBs from contaminated air and thereby influence exposure. The equilibrium concentration of PCB‐28 and PCB‐52 was quantified for nine used clothing fabrics exposed for 56 days to air in a Danish apartment contaminated with PCBs. Fabric materials included pure materials such as cotton and polyester, or blends of polyester, cotton, viscose/rayon, and/or elastane. Air concentrations were fairly stable over the experimental period, with PCB‐28 ranging from 350 to 430 ng/m³ and PCB‐52 ranging from 460 to 550 ng/m³. Mass accumulated in fabric ranged from below detection limits to 4.5 mg/g of fabric. Cotton or materials containing elastane sorbed more than polyester materials on a mass basis. Mass‐normalized partition coefficients above detection limits ranged from 10^5.7 to 10^7.0 L/kg. Clothing acts as a reservoir for PCBs that extends dermal exposure, even when outside or in uncontaminated buildings.     

Fast and scalable rendezvousing

In an asymmetric rendezvous system, such as an unfair synchronous queue or an elimination array, threads of two types, consumers and producers, show up and are matched each with a unique thread of the other type. Here we present new highly scalable, high throughput asymmetric rendezvous systems that outperform prior synchronous queue and elimination array implementations under both symmetric and asymmetric workloads (more operations of one type than the other). Based on this rendezvous system, we also construct a highly scalable and competitive stack implementation.     

Extraction of Lipids from Cereal Starches with Hot Aqueous Alcohols

Cereal starches were extracted at 100°C with various proportions of lower alcohols and water to establish optimum conditions. Lipid yields generally exceeding 90% were obtained with one two-hour extraction of maize starch at 100°C when using not less than 14 ml of 75–85% methanol, 10 ml of 75% ethanol, 12 ml of 74–78% n-propanol, 14 ml of 74–78% isopropanol, or 17 ml of 84% n-butanol per gram of starch. Similar results were obtained with wheat A-starch ( > 8 μm granule diameter), wheat B-starch ( < 8 μm granule diameter) and rice starch using n-propanol-water, and with rice starch using methanol-water. Yields decreased if the proportions of alcohol and water were not kept within well-defined limits, especially with butanol and ethanol. The preferred conditions for complete recovery of lipids were two 2-hour extractions and one 1-hour extraction at 100°C with not less than 16 ml of 75% n-propanol per gram of starch.     

Solvent Extraction of Fatty Acids from Amylose Inclusion Complexes

The extractability of palmitic and other common fatty acids from inclusion complexes with potato amylose was studied using a wide range of common lipid solvents. At ambient temperature negligible yields were obtained with light petroleum or diethyl ether, and yields were low with most other solvents except those containing methanol or water. At 100°C, methanol, ethanol and propanol and all alcohol-water mixtures gave good yields. Complexes of amylose with 1-O-palmitoyllysophosphatidylcholine also gave good yields when extracted with propanol-water (3:1) at 100°C. Since more rigorous conditions are required for extraction of lipids from native cereal starch granules, it seems that the barrier to lipid extraction is the structure of the granule rather than the resistance to lipid extraction of any possible inclusion complexes in the granules.