Radon daughter deposition velocities estimated from field measurements

The surface deposition rate (plateout) of unattached radon daughters was estimated from simple surface activity measurements in a number of occupied buildings, and found to be about one third of the lowest value measured in diffusion tube experiments. This low value was confirmed by surface deposition and activity measurements made in a commercial building with high radon levels, which also showed that the deposition rate was higher on walls than on floors or tables. Predictions of the ratio between airborne and surface-deposited radon daughter activity using the estimated surface deposition rate were close to the ratios observed in occupied homes. Refinements to existing models are required to explain the variability of deposition rate with surface orientation.     

Using GOMS and NASA-TLX to Evaluate Human–Computer Interaction Process in Interactive Segmentation

HCI plays an important role in interactive medical image segmentation. The Goals, Operators, Methods, and Selection rules (GOMS) model and the National Aeronautics and Space Administration Task Load Index (NASA-TLX) questionnaire are different methods that are often used to evaluate the HCI process. In this article, we aim at improving the HCI process of interactive segmentation using both the GOMS model and the NASA-TLX questionnaire to: 1) identify the relations between these two methods and 2) propose HCI design suggestions based on the synthesis of the evaluation results using both methods. For this, we conducted an experiment where three physicians used two interactive segmentation approaches to segment different types of organs at risk for radiotherapy planning. Using the GOMS model, we identified 16 operators and 10 methods. Further analysis discovered strong relations between the use of GOMS operators and the results of the NASA-TLX questionnaire. Finally, HCI design issues were identified, and suggestions were proposed based on the evaluation results and the identified relations.     

Specific recognition of HLA-E, but not classical, HLA class I molecules by soluble CD94/NKG2A and NK cells

The CD94/NKG2 receptors expressed by subpopulations of NK cells and T cells have been implicated as receptors for a broad range of both classical and nonclassical HLA class I molecules. To examine the ligand specificity of CD94/NKG2 proteins, a soluble heterodimeric form of the receptor was produced and used in direct binding studies with cells expressing defined HLA class I/peptide complexes. We confirm that CD94/NKG2A specifically interacts with HLA-E and demonstrate that this interaction is dependent on the association of HLA-E with peptide. Moreover, no interaction between CD94/NKG2A and classical HLA class I molecules was observed, as assayed by direct binding of the soluble receptor or by functional assays using CD94/NKG2A+ NK cells. The role of the peptide associated with HLA-E in the interaction between HLA-E and CD94/NKG2A was also assessed. All class I leader sequence peptides tested bound to HLA-E and were recognized by CD94/NKG2A. However, amino acid variations in class I leader sequences affected the stability of HLA-E. Additionally, not all HLA-E/peptide complexes examined were recognized by CD94/NKG2A. Thus CD94/NKG2A recognition of HLA-E is controlled by peptide at two levels; first, peptide must stabilize HLA-E and promote cell surface expression, and second, the HLA-E/peptide complex must form the ligand for CD94/NKG2A.     

商业车辆变速器的因素——性能,换档平顺性,噪时状况

Ｅｃｏｓｐｌｉｔ３系列的样机现代化表示的重要特征是不改变原来整个设计原理而能大大改进变速器的转矩能力、档平顺性和噪音状况。斜齿行星齿轮装置可使变速 降低１０分贝、在车辆变速败露首次采用了“锥形止推垫圈”技术,可使该行呈齿轮传动中的斜齿轮的轴向力自身消除。     

Herstellung,Verarbeitung und Eigenschaften höherfester Stähle für den Einsatz in Windenergieanlagen

Production, processing and properties of higher‐strength steel plates for application in wind energy plants. The mechanical and technological demands on steels for offshore wind energy plants are high. Advanced technologies in steel production make normalized or thermomechanically rolled plates with minimum yield strengths up to 460 MPa as well as quenched and tempered steels with minimum yield strengths from 520 up to 1100 MPa available for construction. Plates with up to 460 MPa are well established for building wind energy plants. Material properties and processing of these steel grades are well known. High‐strength steels offer further possibilities for construction. These steels are characterised by high yield strength and at the same time high toughness and excellent processing behaviour. By modern fracture mechanical safety concepts, it could be shown, that even under critical service conditions there can be guaranteed a high level of safety against brittle failure.     

PET短纤维和长丝：生产工艺的发展趋势

聚酯短纤维和长丝的消费不断增长，这给商业增长提供了巨大的机会，但同时，世界范围的竞争日趋激烈。今天为了保持市场竞争力，作出正确决定变得越来越重要。本文的目的是从技术角度剖析赢得经济挑战的一些基本因素。     

The mechanism of intergranular corrosion of dilute zinc-aluminium alloys in hot water

On the basis of polarization studies, grain boundary corrosion rate measurements and metallographic results, a corrosion mechanism is advanced which allows for a full explanation of the corrosion behaviour of zin—aluminium alloys. Explanations are provided for the well-known detrimental effects of lead additions, and the beneficial effects of copper and magnesium additions to these alloys.     

Female x male interactions in Drosophila sperm competition

In several organisms, the success of a male's sperm in multiply inseminated females depends on the male's genotype. In Drosophila, the female also plays a role in determining which sperm are successful. Pairwise tests among six isogenic lines of Drosophila melanogaster were performed to determine whether there is a genotype-specific interaction in the success of sperm. The success of a particular male's sperm was found to depend on the genotype of the female with which he mates, providing evidence for an interaction with profound evolutionary consequences.