Stabilised p53 facilitates aneuploid clonal divergence in colorectal cancer

Mutations in the p53 tumour suppressor gene are amongst the most frequent genetic abnormalities acquired in tumours. Recent studies in vitro suggest that mutant p53 destabilises the genome and facilitates development of aneuploidy. Here, in a study of 83 colorectal carcinomas, we demonstrate that alterations in p53 (detected by immunocytochemical stabilisation) precede and apparently facilitate divergence of aneuploid sub-clones. Aneuploidy in these tumours (but not those with normal p53) is predominantly in the subtetraploid range, suggesting that endoreduplication is important in its origin. This association with a specific phase of carcinoma progression is not shared by other commonly acquired genetic abnormalities in these tumours. These observations highlight the critical role of p53 in the regulation of abnormal chromosome replication and afford an explanation for the association between p53 abnormalities, aneuploidy and biological aggression in cancer.     

Induction of hapten-specific tolerance by interleukin 10 in vivo

Interleukin 10 (IL-10) is released during the induction phase of contact sensitivity and was shown in prior functional studies to convert epidermal Langerhans cells (LC) from potent inducers of primary immune responses to specifically tolerizing cells in vitro. To investigate whether IL-10 also subserves the function of a tolerizing agent in vivo ears of BALB/c or C3H mice were injected intradermally with 1-2 micrograms of recombinant mouse (rm)IL-10 8 h before epicutaneous application of 3% trinitrochlorobenzene (TNCB; a contact allergen). As a control, mice were injected with phosphate-buffered saline or IL-10 plus neutralizing amounts of anti-IL-10 mAb. 5 d later, mice were challenged with 1% TNCB on contralateral ears and ear swelling response was measured 24 h later. Whereas control-treated mice showed a normal ear swelling response to epicutaneous challenge (delta mm-2 = 25 +/- 5), ear swelling response of IL-10-treated animals was significantly inhibited (delta mm-2 = 3 +/- 2). Coinjection of IL-10-specific mAb together with rmIL-10 completely abrogated this effect. To differentiate between a state of nonresponsiveness and induction of tolerance by IL-10, mice initially treated with IL-10 and TNCB were resensitized with 3% TNCB in the absence of any treatment after 14 d of rest (group 1). Again mice were challenged 5 d later and ear swelling responses were tested. Whereas control mice treated with allergen alone (group 2) showed a good swelling response (delta mm-2 = 28 +/- 6), IL-10-treated mice (group 1) showed a minimal response towards application of allergen (delta mm-2 = 4 +/- 2). To show that anergy induction by IL-10 was antigen-specific, mice initially treated with IL-10 plus TNCB were exposed to 0.5% dinitrofluorobenzene (DNFB) 14 d later (group 1). After challenge with 0.1% DNFB, IL-10-treated mice showed an ear swelling response (delta mm-2 = 13 +/- 3; group 1) similar to that of control mice only sensitized with DNFB (delta mm-2 = 14 +/- 3; group 3). In an attempt to show the induction of antigen-specific tolerance in these mice in vitro, regional lymph nodes of mice initially treated with TNCB plus IL-10 (group 1) and control-treated mice (groups 2 and 3) were prepared and cultured in the presence of TNBS, dinitrobenzene sulfonate (DNBS), or medium to measure antigen-specific proliferation.(ABSTRACT TRUNCATED AT 400 WORDS)     

The relationship between preparation convergence and retention of extracoronal retainers

PURPOSE: Although traditional ideal convergence (the sum of taper of the opposite sides) for crown preparation has been arbitrarily set at 4 degrees to 10 degrees, some believe absolute parallelism yields the highest retention. This study examined the relationship between the degree of convergence of a machined metal die and the retention of its casting. MATERIALS AND METHODS: The method used was that of cementing cast metal crowns onto full crown preparations on brass dies with varying convergence angles, and then recording the force required to remove the crowns from the dies in a vertical direction using a Tate-Emery Testing Machine and Load Indicator. RESULTS: It was found that retention (i.e., the force needed to remove the cemented castings from the die in their common long axis) increases from 0 degree convergence to peak between 6 degrees to 12 degrees convergence. It also seems that a critical film thickness does exist for optimum retention, and that film thicknesses smaller than the critical thickness may be responsible for the phenomenon that we have observed and directly related to the convergence angle itself. CONCLUSIONS: There seems to be experimental data supporting the use of traditionally taught convergence. Our study found that convergence angles between 6 degrees and 12 degrees seem to be optimum for tooth crown preparation when one plans to use zinc phosphate cement. Convergence angles of less than 6 degrees may not be desirable even if they can be clinically achieved. The results of our study indicate that a relationship exists between the convergence angle and the critical cement thickness that is necessary to realize the maximum strength properties of zinc phosphate cement.     

Fabrication of low-loss IR-transmitting Ge30As10Se30Te30 glass fibers

Improved purification and processing techniques have been utilized to fabricate Ge₃₀As₁₀Se₃₀Te₃₀ glass fibers with a minimum loss of O.11 dB/m at 6.6 μm. This is the lowest loss reported for any telluride glass fiber in the infrared region. Furthermore, the fibers exhibit less than 1 dB/m loss between 5.25 and 9.5 μm     

Reperfusion injury delays healing of intestinal anastomosis in a rat

This SAEM position paper clarifies the role of emergency medicine in health care delivery. It builds upon the working definition of emergency medicine developed by the American College of Emergency Physicians in 1994 by describing the health care role of emergency physicians (EPs). EPs are first-contact providers who care for all patients regardless of age, gender, time of presentation, or ability to pay. They remain the only continuously accessible specialty for patients seeking help and solace in the health care system. They are an essential link in the health care continuum between primary care physicians, specialists, the out-of-hospital system, the patient, inpatient services, and communication services. The EP's role is in organizing and monitoring the emergency care delivery system. Part of this role is to better align the health care provider training and ability with the specific medical needs of a patient. The emergency health care system remains the essential medical safety net for all individuals needing care in this country.     

Fabrication of Arsenic Sulfide Optical Fiber with Low Hydrogen Impurities

Arsenic sulfide glass optical fibers typically possess extrinsic absorption bands in the infrared wavelength region associated with residual hydrogen and oxygen related impurities, despite using purified precursors. We report a purification process based on the addition of tellurium tetrachloride (TeCl₄) to the glass. During melting, the chlorine from TeCl₄ reacts with the hydrogen impurities to produce volatile products (e.g., HCl) that can be removed by subsequent dynamic distillation. The processing conditions have been modified accordingly to produce optical fibers with significantly reduced loss due to hydrogen sulfide impurity content (1.5 dB/m).     

An integrated air-gap-capacitor pressure sensor and digital readoutwith sub-100 attofarad resolution

The fabrication and characterization of an integrated air-gap-capacitor pressure sensor are presented. The capacitor fabrication process uses standard IC processing to create NMOS circuits, and an added polysilicon layer to create poly-to-n⁺ capacitors with a 0.6-μm-thick dielectric using deposited oxide. Subsequent processing is used to produce deformable, parallel-plate, air-gap capacitors on the front side alongside MOS circuits. Sensor chips are fabricated using 100-μm×100-μm, 100-fF air-gap capacitors with on-chip circuitry. The sensor chip is a part of a capacitive measurement system that uses a charge-redistribution sense technique to achieve very high capacitance resolution. The behavior of the pressure sensor chips was studied as a function of applied pressure in the 0-240-kPa (0-35-psi) range. Measurements indicate a sensitivity of 0.93 mV/kPa (6.40 mV/psi) with a deflection of 10 nm/kPa (70 nm/psi) at 0-69 kPa (0-10 psi). Standard deviations indicate a static pressure resolution of 0.54 kPa (0.078 psi), which translates to 30 attofarads at a sampling frequency of 11 kHz     

On the optimum design of unitary cyclic group space-time codes

In this letter, based on the exact pairwise-error probability, we derive the union bound on the symbol-error probability (SEP) of the differential unitary space-time (DUST) modulation employing group codes. Instead of using the rank-and-determinant or Euclidean distance criteria, we optimize the cyclic group codes such that the union bound on the SEP is minimized for a predetermined scenario, taking into account the number of transmit and receive antennas and the operating signal-to-noise ratio (SNR). Our simulation results show that for a wide range of SNRs, the codes with the minimum union bound for a particular SNR outperform the codes designed based on rank-and-determinant or Euclidean distance criteria.