Influence of Surface Morphology on the Torsion Fracture of NiTi Endodontic Instruments

This study analyzed the influences of manufacturing process (twisting and machining) and surface finishing on the angular distortion, maximum torque, and toughness of two NiTi endodontic instruments (Race—FKG Dentaire and TF—Twisted Files, SybronEndo). Statistical analysis of results showed that TF instruments (twisted) had higher distortion angle (p < 0.05) and lower maximum torque to fracture (p < 0.05) than Race instruments (machined). SEM analysis of fractured instruments showed a surface morphology characteristic of ductile fracture, with plastic deformation in the helical shafts. The results suggest that both instruments are equally suitable for clinical applications. This study is purely scientific as it evaluates only some material properties, and is not intended to endorse a commercial product.     

Oxygen reduction reaction on a Pt/carbon fuel cell catalyst in the presence of trace quantities of ammonium ions: An RRDE study

The effect of trace quantities of ammonia on oxygen reduction reaction (ORR) on carbon-supported platinum catalysts in perchloric acid solutions is assessed using rotating ring disk electrode (RRDE) technique. The study demonstrates that ammonia has detrimental effects on ORR. The most significant effect takes place in the potential region above 0.7 V vs RHE. The effect is explained by the electrochemical oxidation of ammonia, which blocks Pt active sites and increases the formation of H₂O₂. This leads to losses in the disk currents and increments in the ring currents. The apparent losses in ORR currents may occur in two ways, namely, through the blocking of the active sites for ORR as well as by generating a small anodic current, which is believed to have a lower contribution. In addition, a detrimental effect of sodium cations in the potential range below 0.75 V vs RHE was demonstrated. This effect is most likely due to the co-adsorption of sodium cations and perchlorate anions on the Pt surface.     

A new sheep model with automatized analysis of biomaterial-induced bone tissue regeneration

Presently, several bone graft substitutes are being developed or already available for clinical use. However, the limited number of clinical and in vivo trials for direct comparison between these products may complicate this choice. One of the main reasons for this scarcity it is the use of models that do not readily allow the direct comparison of multiple bone graft substitutes, due especially to the small number of implantation sites. Although sheep cancellous bone models are now well established for these purposes, the limited availability of cancellous bone makes it difficult to find multiple comparable sites within a same animal. These limitations can be overcome by the monocortical model here proposed as it consists in 5–6 holes (5 mm Ø), in the femoral diaphysis, with similar bone structure, overlying soft tissue and loading pattern for all defects. Associated to this model, it is also described a fast histomorphometric analysis method using a computer image segmentation test (Threshold method) to assess bone regeneration parameters. The information compiled through the experimental use of 45 sheep in several studies allowed determining that this ovine model has the potential to demonstrate differences in bone-forming performance between various scaffolds. Additionally, the described histomorphometric method is fast, accurate and reproducible.     

Incorporation of Alpha‐Linolenic Acid and Enhancement of n‐3 Fatty Acids in Nile Tilapia: a Factorial Design

A 2² factorial design (two factors at two levels, in triplicate) was performed to investigate the influence of factors A (time of treatment, 15 and 30 days) and B (chia oil content in a supplemented diet, at 2.1 and 4.2 %) in three responses of interest referring to: (a) the incorporation of alpha‐linolenic acid (LNA) in lipids of Nile tilapia fillet; (b) the enhancement of n‐3 fatty acids; and (c) the decrease in the omega‐6/omega3 (n‐6/n‐3) ratio in fish. Factors A and B were significant in the three regression models obtained and the interaction AB was a significant contributor to the LNA and n‐6/n‐3 ratio. Analysis of variance suggested three significant and predictive mathematical models. Response surfaces analyses from designs indicated higher LNA and n‐3 contents and a lower n‐6/n‐3 ratio using both factors A and B in the higher levels (30 days of treatment and 4.2 % of chia oil in the diet for fish) chosen for this study.     

A New Methodology to Evaluate the Cure of Resin-Impregnated Paper for HPL

This paper presents a study on the curing conditions of several resin-impregnated papers and its impact on the performance of HPL (high-pressure decorative laminate). A new methodology for evaluating the bond strength development between the different layers of a HPL(overlay, decorative, and kraft papers) was developed using ABES (Automated Bonding Evaluation System) equipment. The proposed method can be applied to the study of the curing step of the different impregnated paper and the development of bonds between them (overlay paper on decorative paper, decorative paper on kraft paper, and kraft paper on kraft paper) trying to simulate the hot-pressing of an industrial HPL. This will permit to establish a more adapted temperature gradient in hot-press in order to achieve the same curing rate for all layers and provide a good final overall product quality.     

Analysing green supply chain management practices in Brazil’s electrical/electronics industry using interpretive structural modelling

Industries need to adopt the environmental management concepts in the traditional supply chain management. The green supply chain management (GSCM) is an established concept to ensure environment-friendly activities in industry. This paper identifies the relationship of driving and dependence that exists between GSCM practices with regard to their adoption within Brazilian electrical/electronic industry with the help of interpretive structural modelling (ISM). From the results, we infer that cooperation with customers for eco-design practice is driving other practices, and this practice acts as a vital role among other practices. Commitment to GSCM from senior managers and cooperation with customers for cleaner production occupy the highest level.     

Metformin Reduces Lipogenesis Markers in Obese Mice Fed a Low-Carbohydrate and High-Fat Diet

Lipogenesis is the process by which fatty acids are synthesized. In metabolic syndrome, an insulin resistant state along with high plasma levels of free fatty acids (FFA) and hyperglycemia may contribute to the lipogenic process. The aim of the present study was to investigate the effects of oral administration of metformin on the expression of lipogenic genes and glycemic profile in mice fed with low‐carbohydrate high‐fat diet by evaluating their metabolic profile. SWISS male mice were divided into 4 groups (N = 7) that were fed with standard (ST), standard plus metformin (ST + MET), low‐carbohydrate high‐fat diet (LCHFD) and low‐carbohydrate high‐fat diet plus metformin (LCHFD + MET) (100 mg kg^?1 diet) diets respectively. Food intake, body weight and blood parameters, such as glucose tolerance, insulin sensitivity, glucose, HDL‐c, total cholesterol, triglycerides, ASL and ALT levels were assessed. Histological analyses were performed on hematoxylin and eosin‐stained epididymal adipose tissue histological specimens. The expression levels of peroxisome proliferator‐activated receptor (PPARγ), sterol regulatory element‐binding protein 1 (SREBP1), fatty acid synthase (FAS) and acetyl‐CoA carboxylase (ACC), were assessed by RT‐PCR. This study showed that metformin decreased adipocyte area, body weight and food consumption in obese animals when compared to the standard group. Furthermore, the expression of lipogenic markers in adipose tissue were diminished in obese animals treated with metformin. This data showed that oral administration of metformin improved glucose and lipid metabolic parameters in white adipose tissue by reducing the expression of lipogenesis markers, suggesting an important clinical application of MET in treating obesity‐related diseases in metabolic syndrome.     

In Vitro Activity of Copper(II) Complexes,Loaded or Unloaded into a Nanostructured Lipid System,against Mycobacterium tuberculosis

Tuberculosis (TB) is an infectious disease caused mainly by the bacillus Mycobacterium tuberculosis (Mtb), presenting 9.5 million new cases and 1.5 million deaths in 2014. The aim of this study was to evaluate a nanostructured lipid system (NLS) composed of 10% phase oil (cholesterol), 10% surfactant (soy phosphatidylcholine, sodium oleate), and Eumulgin^® HRE 40 ([castor oil polyoxyl-40-hydrogenated] in a proportion of 3:6:8), and an 80% aqueous phase (phosphate buffer pH = 7.4) as a tactic to enhance the in vitro anti-Mtb activity of the copper(II) complexes [CuCl₂(INH)₂]·H₂O (1), [Cu(NCS)₂(INH)₂]·5H₂O (2) and [Cu(NCO)₂(INH)₂]·4H₂O (3). The Cu(II) complex-loaded NLS displayed sizes ranging from 169.5 ± 0.7095 to 211.1 ± 0.8963 nm, polydispersity index (PDI) varying from 0.135 ± 0.0130 to 0.236 ± 0.00100, and zeta potential ranging from −0.00690 ± 0.0896 to −8.43 ± 1.63 mV. Rheological analysis showed that the formulations behave as non-Newtonian fluids of the pseudoplastic and viscoelastic type. Antimycobacterial activities of the free complexes and NLS-loaded complexes against Mtb H₃₇Rv ATCC 27294 were evaluated by the REMA methodology, and the selectivity index (SI) was calculated using the cytotoxicity index (IC₅₀) against Vero (ATCC^® CCL-81), J774A.1 (ATCC^® TIB-67), and MRC-5 (ATCC^® CCL-171) cell lines. The data suggest that the incorporation of the complexes into NLS improved the inhibitory action against Mtb by 52-, 27-, and 4.7-fold and the SI values by 173-, 43-, and 7-fold for the compounds 1, 2 and 3, respectively. The incorporation of the complexes 1, 2 and 3 into the NLS also resulted in a significant decrease of toxicity towards an alternative model (Artemia salina L.). These findings suggest that the NLS may be considered as a platform for incorporation of metallic complexes aimed at the treatment of TB.     

The Impact of Polyoxyethylene Sorbitan Surfactants in the Microstructure and Rheological Behaviour of Emulsions Made With Melted Fat From Cupuassu (<Emphasis Type="Italic">Theobroma grandiflorum</Emphasis>)

Cupuassu fat is a good candidate for partial substitution of cocoa butter in many products, including emulsions. However, for such use it is necessary to know the characteristics of the products prepared with cupuassu fat. Therefore, the main goal of this work is to characterize emulsions prepared with cupuassu fat using the surfactants Tween^® 60, Tween^® 80 and Tween^® 85 as emulsifiers. The emulsions were prepared at 43 °C with addition of 0.5 or 1.5 % (w/v) of surfactant and compared with an emulsion without surfactant. All emulsions were analysed by conductivity, stability, pH, optical microscopy, rheology and oxidative stability. It was verified that the emulsions prepared with Tween^® 60 and Tween^® 80 have higher stability, smaller droplet size and higher apparent viscosity. Also, these properties are positively influenced by the concentration of the surfactant. On the other hand, emulsions prepared with Tween 85 or without surfactant reached unsatisfactory results. The rheological behaviour of the emulsions was adequately described by both Herschel-Bulkley and Mizhari-Berki models revealing pseudoplastic character. These emulsions also present strong gel behaviour, with storage modulus higher than loss modulus. In conclusion, cupuassu fat can be used as oil phase for emulsions products and this characterization helps to understand their behaviour in order to increase their use in food industry.     

Experimental Design Applied for Cost and Efficiency of Antioxidants in Biodiesel

Oxidation stability is a parameter of great importance for biodiesel quality control to both producers and subsequent consumers. To maintain the quality of biodiesel, currently the most effective and economical method is the addition of antioxidants that prevent or retard the biofuel oxidation reaction. In this study, efficiency and cost of synthetic antioxidants added to B100 biodiesel from soybean oil and pork fat were evaluated, using butylhydroxyanisole (BHA), butylhydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ), in pure form or in mixtures, according to a simplex-centroid mixture experimental design. Results demonstrate an increased induction period (IP) in all trials when compared to the control sample, and TBHQ was the only antioxidant alone that met all the specification standards, while BHT and BHA alone met only the American standard specifications. The antioxidant mixture that presented the highest synergistic effect was that of TBHQ and BHA. Multi-response optimization indicated an optimum formulation containing 75 % TBHQ and 25 % BHA with an IP of 7.27 h at 110 °C and the antioxidant mixture cost of 31.31 USD, to be added for a ton of biodiesel. This simplex-centroid mixture experimental design shows an ability to be applied in the biodiesel, oils and fats industry to evaluate the oxidation stability and the occurrence of synergism between different mixtures of synthetic or natural antioxidants and their costs.