Renewable linear alpha olefins by selective ethenolysis of decarboxylated unsaturated fatty acids

A two‐step concept for the production of linear alpha olefins from biomass is reported. As a starting material an internally unsaturated C17 alkene was used, which was obtained by the decarboxylation of oleic acid. Here, we report on the ethenolysis of this bio‐based product, using commercially available metathesis catalysts. The desired alpha olefin products, 1‐nonene and 1‐decene, were obtained in excellent yield (96%) and selectivity (96%). Practical applications: The two‐step conversion described in this contribution, starting from unsaturated fatty acids, provides a method for the production of industrially important linear alpha olefins. These valuable products are widely used as starting materials for the production of surfactants and polymers such as linear low density polyethylene (LLDPE).     

Synthesis of digital optimal reduced-order compensators for asynchronously sampled systems

The synthesis of finite-horizon digital optimal reduced-order compensators is presented, for asynchronous and aperiodically sampled continuous-time systems. The dimensions of the compensator state are a priori fixed and may be time varying. Asynchronous and aperiodic sampling refers to a deterministic sampling scheme where an arbitrary, but a priori known, number of control variables is updated, and/or an arbitrary, but a priori known, number of outputs is sampled, at arbitrary, but a priori known, time instants. This sampling scheme generalizes most deterministic sampling schemes considered in the control literature. Through the use of an integral criterion the intersample behaviour is explicitly considered in the design. As a result, frequent, synchronous and periodic sampling is no longer necessary, which can be highly relevant in practice. Also the synthesis enables comparison of the optimal performance of reduced-order compensators as a function of their dimensions and the sampling scheme. The synthesis is illustrated with a numerical example.     

Experimental Evidence of the Effect of Alloying Additions on the Stagnant Stage Length During Cyclic Partial Phase Transformations

Cyclic phase transformation experiments are performed in a series of Fe-C-xMn, Fe-C-Mn-xNi, and Fe-C-Mn-xCo alloys to study the effect of alloying elements on the length of the stagnant stage during a cyclic partial phase transformation in the austenite–ferrite two-phase region. The length of stagnant stage increases linearly with the increasing Mn or Ni concentration, while Co has no effect. It was experimentally proven that the effects of alloying elements on the length of stagnant stage are additive, and the experimental results matched the predictions of the local equilibrium model very well.     

流动城市

这是一个在商业公园、港口和机场之间开发的项目,要求不能违背大加那利群岛的地理特质。我们的目标是提高这些本地条件,注入明确的城市规划和景观规划方案。我们计划建立3个超级区域网络:东西向的地景河床     

Use of the Cone Calorimeter and ConeTools software for development of innovative intumescing graphite systems

The Cone Calorimeter test method has been one of the most used small‐scale fire test method for years now and is at present widely spread over the world. In contrast to many other fire test methods, the Cone Calorimeter provides a range of data with sound scientific basis, which allows a wide range of applications. It can be used for modelling and also for enhanced product development. This paper describes the use of the Cone Calorimeter for the development of new innovative materials in combination with a mathematical model. As example, the cost effective development of an innovative intumescing graphite system for protecting particle board is explained. The performance goal of the project is to obtain the threshold values for a B class in the Single Burning Item (SBI) test method used for the newly developed Euroclass system. The focus of this paper is on the development tools and not on the chemical development of the protective system. During the research it was necessary to develop a new sample holder for the Cone Calorimeter. The results from the project show that the industry can save development time and resources by using the Cone Calorimeter in combination with a simple mathematical model. Copyright © 2010 John Wiley & Sons, Ltd.     

Correlating the effects of ash elements and their association in the fuel matrix with the ash release during pulverized fuel combustion

During pulverized fuel combustion, inorganic elements such as alkalis, sulfur, chlorine, calcium and magnesium, as well as a range of minor elements are partly released into the gas phase. These gas-borne species can nucleate, coagulate and condense to form either aerosol particles or sticky layers on ash particles, leading to ash deposition and corrosion problems in power utilities. Furthermore, the fine aerosols can lead to harmful gaseous and particulate emissions. It is well documented that the mode of occurrence and the chemical speciation of ash forming elements in the coal/biomass structure are important for the release behavior of mineral components. In the presented work, this is investigated by performing quantitative elemental investigations of ash releases for two different coals (a Polish and a UK coal) and six diverse biomass fuels (Wood bark, Wood chips, Waste wood, Olive residue, Saw dust and Straw). The tests are performed within the Lab-scale Combustion Simulator (LCS) of the Energy Research Centre of the Netherlands (ECN). The operating conditions applied were that of a typical pulverized fuel (PF) fired boiler i.e. atmospheric pressure, high temperatures of 1400-1650 °C, and high heating rate of 10⁵ K/s. Gas phase elemental release of alkalis, sulfur, chlorine, calcium and magnesium has been quantified at relevant high carbon conversion levels. With the performed set of experiments several of the past observations from the literature are reconfirmed. In addition to this, based on the extensive data pool at hand, a simple but reliable (R² > 0.95) set of linear correlations have been proposed to predict the elemental release of potassium, sodium, chlorine and sulfur. It is also concluded that such linear expressions can be particularly effective for the prediction of elemental release from the fuels of similar characteristics, such as woody biomass.     

Characteristics of traditionally processed shea kernels and butter

The traditional production of shea butter requires a heat treatment of the nuts. This study compared the end products derived by two commonly used heat treatments, namely smoking and boiling followed by sun‐drying. Neither treatment influenced the moisture content of the kernels (8–10%), but the boiling treatment resulted in more free fatty acids (FFA) (6%) and a higher fat content (41%) of kernels. A sensory panel preferred shea butter from boiled kernels because of its soft texture and intense smell. This butter also had the highest values for moisture content (2%), unsaponifiable matter (7%), tocopherol compounds (125 mg g^?1), peroxide value (8 meq O₂ kg^?1), iodine value (53 mg I₂ 100 g^?1) and FFA (2%). Minor variations were noticed in the fatty acid profile. Aside from the use of butter from both boiled and smoked kernels in cosmetics, the butter from smoked kernels will be more suitable for food purposes.