薄板坯连铸工艺液芯压下的有限元分析

简要介绍世界几种主要薄板坯连铸工艺。着重叙述应用大型通用商业软件MSC.MARC。模拟液芯压下时铸坯的变形，确定最佳压下方案的有限元分析，液芯压下应该在结晶器出口处及二冷区扇形段开始部分进行，这样能减小铸坯的应变。     

液压系统广义可靠性设计

介绍了广义可靠性和有效度的基本概念，简要论述了对液压系统进行广义可靠性设计的重要性，并从可靠性设计和维修性设计两方面提出了提高液压系统有效度的具体措施。／     

LDPC-based space-time coded OFDM systems over correlated fadingchannels: Performance analysis and receiver design

We consider a space-time coded (STC) orthogonal frequency-division multiplexing (OFDM) system with multiple transmitter and receiver antennas over correlated frequency- and time-selective fading channels. It is shown that the product of the time-selectivity order and the frequency-selectivity order is a key parameter to characterize the outage capacity of the correlated fading channel. It is also observed that STCs with large effective lengths and ideal built-in interleavers are more effective in exploiting the natural diversity in multiple-antenna correlated fading channels. We then propose a low-density parity-check (LDPC)-code-based STC-OFDM system. Compared with the conventional space-time trellis code (STTC), the LDPC-based STC can significantly improve the system performance by exploiting both the spatial diversity and the selective-fading diversity in wireless channels. Compared with the previously proposed turbo-code-based STC scheme, LDPC-based STC exhibits lower receiver complexity and more flexible scalability. We also consider receiver design for LDPC-based STC-OFDM systems in unknown fast fading channels and propose a novel turbo receiver employing a maximum a posteriori expectation-maximization (MAP-EM) demodulator and a soft LDPC decoder, which can significantly reduce the error floor in fast fading channels with a modest computational complexity. With such a turbo receiver, the proposed LDPC-based STC-OFDM system is a promising solution to highly efficient data transmission over selective-fading mobile wireless channels     

人骨骼中~(228)Th、~(230)Th和~(232)Th含量的同时测定

本文介绍了用α谱仪同时测定人骨骼中~(228)Th、~(230)Th和~(232)Th含量的方法。样品用浓 HNO_3和 H_2O_3湿灰化,草酸钙共沉淀载带、CL-5208萃淋树脂和743阳离子交换树脂联合分离后,电沉积制源,在低温半导体α谱仪上测量。该方法对~(234)Th的全程回收率为95.0±1.7%,对铀和镭的去污系数分别为6.3×10~4和1.5×10~3,对~(228)Th、~(230)Th、~(232)Th 的探测下限分别为0.432、0.135和0.108Bq/kg(鲜重)。     

Magnetic field dependence of shielding current density in Y-Ba-Cu-O rings at 77 K

A method for contactless measurement of the shielding critical current density and its dependence on the external magnetic field is described and analyzed. The obtained values are compared with those measured resistively on two different samples. It is shown that the shielding critical current densityJ _cs and the intergranular transport current densityJ _cr are identical if the measurement conditions are similar. A degradation ofJ _cs measured in the external field with AC ripple has been observed.     

The corrosion behavior of sputter-deposited aluminum-tungsten alloys

Thin films on aluminum-tungsten alloys were prepared by co-deposition of pure aluminum and pure tungsten, each sputtered by an independently controlled magnetron source, on glass and sapphire substrates. Completely amorphous films were obtained in the Al₈₀W₂₀-Al₆₇W₃₃ composition range. Passivity and corrosion behavior of amorphous Al-W alloys were investigated in 1 M deaerated hydrochloric acid solution using polarization and impedance spectroscopy measurements and have been correlated with the properties of pure alloy components. Tungsten and sputter-deposited Al-W thin films are inherently passive materials while aluminum undergoes pitting corrosion in hydrochloric acid solution. The passive film formed at the OCP on each alloy possesses excellent electric and dielectric properties comparable to those of the isolating film on tungsten. The absolute impedance increases with increasing tungsten content in the alloy. According to electrochemical polarization measurements, alloying Al with W in solid solution significantly enhances the material's resistance to pitting corrosion by shifting the breakdown potential above 2000 mV (Al₆₇W₃₃) and lowering the corrosion rate at the OCP by more than two orders of magnitude. The most likely mechanism explaining the passivity of amorphous Al-W alloys, the Solute Vacancy Interaction Model (SVIM), involves the formation of complexes between highly oxidized solute atoms (W⁺⁶) and mobile cation vacancies, which restrict the transport of Cl⁻ through the oxide film and inhibit its breakdown in hydrochloric acid solution. The role that film stress relaxation effects and microscopic defects in amorphous Al-W films, of the some composition, and deposited on various substrates play in their corrosion resistance is discussed.     

WLAN网管系统的现状和发展

2001年以来，全球WLAN（无线局域网）市场应用的瓶颈被打破，中国也迎来了WLAN商业化运作和服务的春天，WLAN为我们带来了一种全新的、灵活的工作方式，同时也带来了新的挑战，本文将对WLAN网络管理的主要内容和具体指标进行阐述，并对各大厂商的WLAN网管产品进行简单介绍和比较。     

Utilities in the sky?: Comparison of space-based and terrestrial solar power systems

Could huge arrays of space-based solar power systems one day supply utility scale electricity to the electric power grid on earth? How realistic a possibility is this option for alternative energy supply at the moment? Finley R. Shapiro, USA compares space-based and terrestrial solar power systems.     

有机锡催化、无中和水洗合成DOP

以有机锡(Fascat4102)作催化剂,苯酐和辛醇(2-乙基己醇)酯化反应生成邻苯二甲酸二辛酯(DOP),其最佳工艺条件为:酯化温度215～225℃,催化剂加入量2.0‰,过量醇含量17%,脱醇真空为20KPa(绝压),脱醇温度为155℃,活性炭加入量为1‰,省却中和水洗和汽提工序,产品质量可以达到优级品.