Calibrating screens for continuous colour displays

This paper focuses on two issues that are important to those who use colour monitors for research in vision. One is concerned with the measurement and calibration of colour screens. To this end the luminance and chromaticity readings of a tri-filter colorimeter and a spectroradiometer are compared (both commonly used to calibrate screens). The second is concerned with screen interactions, whereby colours can be distorted from their expected or calculated values by the colours displayed in neighbouring areas. This issue is crucial for those who use measurements of the light emitted from the red, green and blue phosphors of a monitor in isolation to specify other colours on screen, particularly in the research areas of colour contrast and colour constancy, since the specified colours may not actually be displayed. Finally, an alternative calibration method is described that uses an iterative measurement procedure to obtain screen specifications that are accurate regardless of the display complexity, so that researchers can be confident that the required colours are actually displayed on the screen.     

Porphyromonas (Bacteroides) endodontalis: its role in endodontal infections

Porphyromonas endodontalis (formerly Bacteroides endodontalis) is a black-pigmented anaerobic Gram-negative rod which is associated with endodontal infections. It has been isolated from infected dental root canals and submucous abscesses of endodontal origin. The presence of P. endodontalis in infected dental root canals has been correlated with symptoms of an acute infection. It is occasionally found on oral mucous membranes and periodontal pockets. P. endodontalis has shown relatively low virulence in experimental monoinfections. In anaerobic mixed infections it can play an essential role. Differences in virulence between strains have been related to capsular material. On the basis of different types of capsules, three serotypes have been described. P. endodontalis is sensitive to a wide range of antibiotics, including the penicillins, the tetracyclines, and metronidazole.     

FOS is induced by singing in distinct neuronal populations in a motor network

The acute and subacute effects of intracerebroventricularly (ICV) administered nerve growth factor (NGF) or brain-derived neurotrophic factor (BDNF) on locomotor activity were evaluated in awake adult rats. Immediately after ICV injection through an implanted cannula, locomotor activity was measured by a computerized system using infrared photocells, which allowed us to record locomotion, motility, and rearing simultaneously. A single dose of 5 microg mouse beta-NGF produced significant increases in horizontal ambulatory components of locomotor activity (locomotion and motility), but not vertical movement (rearing) 30-45 min after ICV administration. These increases lasted for at least 3-4 h. Systemic injection of 2.0 mg/kg mecamylamine, a central nicotinic receptor antagonist, inhibited the hyperactivity induced by NGF. Systemic injection of 0.5 mg/kg scopolamine, a muscarinic receptor antagonist, did not interfere with the NGF effects. Thus, while scopolamine induced marked increases in all three measures of behavior in both NGF and cytochrome-c-treated animals, locomotion and motility remained significantly higher in the NGF group. Immunohistochemistry demonstrated that NGF diffused readily from the ventricular space into brain parenchyma on the injected side and could be visualized 1 h after ICV injection. These results suggest that ICV administration of NGF increases locomotor activity by inducing acetylcholine release, and that nicotinic receptors are involved in the hyperactivity induced by NGF. ICV administration of 5 microg recombinant human BDNF had no significant effect on locomotor activity during the 0- to 4-h period after ICV injection. However, it produced significant decreases in locomotion, motility, and rearing 24-26 h later. Hence ICV administration of BDNF has entirely different effects on animal behavior from those evoked by NGF. While NGF elicits increases in ambulatory behavior within hours, BDNF causes delayed decreases in ambulatory behavior.     

Correlations between calving ease and calf survival

Multitrait restricted maximum likelihood methods were used for estimation of heritabilities and genetic and phenotypic correlations between calving ease and calf survival. These analyses examined both direct and maternal effects. Genetic correlation for direct effects between calving ease and calf survival was approximately -.8 in both heifers and cows, indicating favorable associations, whereas phenotypic correlations were -.32 and -.22.     

Non-contact flood discharge measurements using an X-band pulse radar (I) theory

This article describes a non-contact method for measuring surface velocity and discharge in a natural channel. The X-band pulse (9.36 GHz) radar, developed by the Applied Physics Laboratory of the University of Washington, was used to scan instantaneously the lateral distribution of surface velocity across a river section, according to Bragg scattering from short waves produced by turbulent boils on the surface of the river. Based on the assumption that the vertical velocity distribution follows a universal power or logarithmic law, the discharges were estimated.     

Experimental study of phase equilibria in the PbO-ZnO-“Fe2O3”-CaO-SiO2 system in air for high lead smelting slags (CaO/SiO2=0.35 and PbO/(CaO + SiO2)=5.0 by weight)

Experimental studies on phase equilibria in the multicomponent system PbO-ZnO-CaO-SiO₂-FeO-Fe₂O₃ in air have been conducted to characterize the phase relations of a complex slag system used in commercial lead oxidation smelting. The liquidus in the pseudo-ternary section ZnO-“Fe₂O₃”-(PbO + CaO + SiO₂) with the CaO/SiO₂ weight ratio of 0.35 and the PbO/(CaO + SiO₂) weight ratio of 5.0 has been constructed using results of over 100 high-temperature equilibration and quenching experiments followed by electron probe X-ray microanalysis. The liquidus in this pseudoternary section contains primary phase fields of spinel (zinc ferrite) Zn _x Fe_3−x O_4+y , zincite Zn _u Fe_1−u O, melilite Pb _v Ca_2−v Zn _w Fe_1−w Si₂O₇, hematite Fe₂O₃, magneto-plumbite PbFe₁₀O₁₆, and dicalcium silicate Ca_2−t Pb _t SiO₄. The laboratory results are compared with the slags obtained from an industrial reactor.     

The impact of pre-clerking clinics on surgical operation cancellations: a prospective audit

Pre-clerking of all patients undergoing elective general surgical operations was introduced at our hospital in an attempt to reduce an unacceptably high operation cancellation rate. A prospective audit has been performed on the effect of this policy on the cancellation rate. Before the introduction of pre-clerking there was a marked seasonal variation in the number of patients who failed to attend for surgery, which could be explained by absence on holiday. This seasonal variation disappeared after the start of pre-clerking clinics, but there has been no reduction in the number of cancellations for medical reasons.     

The optimisation of higher order resampling methods in a multiprocessor environment

The processing of images obtained from satellites often involves highly repetitive calculations on very large amounts of data. This processing is extremely time consuming when these calculations are performed on sequential machines. Parallel computers are well suited to handling computationally expensive operations such as higher order interpolations on large data sets. This paper decribes work undertaken to develop parallel implementations of a set of resampling procedures on an Alliant VFX/4. Each resampling procedure implemented has been optimised in three stages. First, the algorithm has been restructured, where two-dimensional resampling is performed by two one-dimensional resampling operations. Second, each procedure has been reprogrammed in such a way that the autoparallelisation provided by the FX/Fortran compiler has been exploited. Thirdly, data dependent analysis of each procedure has been performed in order to achieve full optimization of each procedure; each procedure has been restructured where appropriate to circumvent vectorisation and concurrency inhibiting data dependencies. The nature and extent of the code optimization achieved for each procedure is presented in this paper. The original code for the most computationally expensive procedure, as targeted at a sequential machine, was found to have an execution time of 4900 seconds on the Alliant VFX/4 when compiled with regular compiler optimization options. Following algorithmic redesigning and reprogramming of the code, as indicated in stage 1 and stage 2, the execution time was reduced to 248 seconds. Restructuring of the code following data dependency analysis indicated in stage 3 in order to avoid data dependencies and allow concurrency and vectorisation, further reduced execution time to 162 seconds. The consequence of this work is that higher-order resampling methods which had not previous been practical are now routinely performed on the Alliant VFX/4 at the University of Dundee.     

Long-term testing and applications of high-stress MV EPR cables

High-stress design 35-kV ethylene propylene rubber (EPR)-insulated cables with 1.14-mm (45-mil) wall reduction have been in service for more than ten years. In the mid 1990s, an extensive cable testing program was initiated to demonstrate that high-stress designs up to 4 kV/mm (101.6 V/mil) exhibit a significant electrical and mechanical safety margin to operate on typical utility network systems. Investigations were also undertaken to demonstrate the suitability of accessories for high-stress designs. This paper will present the results of six-year, long-term wet electrical testing conducted to demonstrate that with proper design, the aging performance of standard wall and high-stress design cables provide satisfactory results and suitable performance for the intended application. Additionally, utility field experience is presented on 35- and 15-kV cables operating at high stress. The experience for these 15-kV medium-voltage EPR cable designs employ the highest recommended stress for cables of this class, as well as taking into account the complete system performance.