Effect of curing and heat treatment history on the dynamic mechanical response and the pore structure of hardened cement paste

Results for the dynamic mechanical response of hcp (hardened cement paste) specimens as a function of the curing-heat treatment history are reported. The temperature range investigated is from ?160°C to +100°C. In the temperature range from +25°C to +100°C, specimens cured at room temperature (R-cured) show a partially irreversible transition (reduction) in E. There are two low temperature transitions: the “adsorbate transition” between ?160°C and ?6-°C, and the “capillary transition” between ?50°C and 0°C. Both of these transitions are significantly affected by the curing-heat treatment history. Furthermore, both the E-modulus and the BET (water) surface area decrease as the severity of heat treatment increases.     

Models of human reaction to vehicle environments

Models for predicting human comfort responses to environmental variables are presented for diverse vehicles. Air mode studies reveal that comfort is a function of vertical and transverse accelerations, noise levels and seat factors, as well as manoeuvre conditions. Comfort models for ground-based vehicles involve roll rates and noise levels.     

Application of ion-etching of grooves into quartz for surface acoustic wave devices

The application of r.f.-sputter etching techniques to the fabrication of grooves in the surface of quartz is reported. This process has been used for the construction of devices which employ the interaction of surface acoustic waves with arrays of well-defined parallel grooves. Devices have been produced with grooves up to 2.5 m deep, which have substantially rectangular profiles and controllable mark-to-space ratios. The groove geometries have been characterized using Talysurf, optical microscopy, SEM and TEM techniques.     

Coronary Artery Ectasia: Review of the Non-Atherosclerotic Molecular and Pathophysiologic Concepts

Coronary artery ectasia (CAE) is frequently encountered in clinical practice, conjointly with atherosclerotic CAD (CAD). Given the overlapping cardiovascular risk factors for patients with concomitant CAE and atherosclerotic CAD, a common underlying pathophysiology is often postulated. However, coronary artery ectasia may arise independently, as isolated (pure) CAE, thereby raising suspicions of an alternative mechanism. Herein, we review the existing evidence for the pathophysiology of CAE in order to help direct management strategies towards enhanced detection and treatment.     

Overcoming the poor short wavelength spectral response of CdS/CdTe photovoltaic modules via luminescence down‐shifting: ray‐tracing simulations

The short‐wavelength response of cadmium sulfide/cadmium telluride (CdS/CdTe) photovoltaic (PV) modules can be improved by the application of a luminescent down‐shifting (LDS) layer to the PV module. The LDS layer contains a mixture of fluorescent organic dyes that are able to absorb short‐wavelength light of λ < 540 nm, for which the PV module exhibited low external quantum efficiency (EQE), and re‐emit it at a longer wavelength (λ > 540 nm), where the solar cell EQE is high. Ray‐tracing simulations indicate that a mixed LDS layer containing three dyes could lead to an increase in the short‐circuit current density from J_sc = 19.8 mA/cm² to J_sc = 22.9 mA/cm² for a CdS/CdTe PV module. This corresponds to an increase in conversion efficiency from 9.6% to 11.2%. This indicates that a relative increase in the performance of a production CdS/CdTe PV module of nearly 17% can be expected via the application of LDS layers, possibly without any making any alterations to the solar cell itself. Copyright © 2006 John Wiley & Sons, Ltd.     

A modal radar cross section of thin-wire targets via thesingularity expansion method

A modal radar cross section (RCS) of arbitrary wire scatterers is constructed in terms of singularity expansion method parameters. Numerical results are presented for both straight and L-shaped wire targets and are compared to computations performed in the frequency domain using the method of moments     

PMD and PDL monitoring of traffic-carrying transatlantic fibre-optic system

For the first time the direct monitoring of polarisation mode dispersion (PMD) and polarisation-dependent loss (PDL) in a traffic-carrying transatlantic fibre-optic system without the requirement of loopingback is reported. The impact of transmitter polarisation scrambling in the measured results is analysed and verified by the measured results.     

An all-optical implementation of a 3-D crossover switching network

One of the more promising interconnection schemes proposed for use in photonic switching networks is the crossover interconnection network; however, reported implementations of the crossover have been limited in size and complexity. A large-scale cascadable implementation of the optical crossover network that capitalizes on planar symmetric self electrooptic effect device (S-SEED) arrays is discussed. A fully functional experimental prototype with 32 inputs and 32 outputs that was operated at a maximum rate of 55.7 kb/s is also discussed. It is also shown that S-SEED arrays can be operated as simple two-input two-output nodes (called 2-modules) within a controllable network     

A Light‐Blue Phosphorescent Dendrimer for Efficient Solution‐Processed Light‐Emitting Diodes

We describe the preparation of a dendrimer that is solution‐processible and contains 2‐ethylhexyloxy surface groups, biphenyl‐based dendrons, and a fac‐tris[2‐(2,4‐difluorophenyl)pyridyl]iridium(III ) core. The homoleptic complex is highly luminescent and the color of emission is similar to the heteroleptic iridium(III ) complex, bis[2‐(2,4‐difluorophenyl)pyridyl]picolinate iridium(III ) (FIrpic). To avoid the change in emission color that would arise from attaching a conjugated dendron to the ligand, the conjugation between the dendron and the ligand is decoupled by separating them with an ethane linkage. Bilayer devices containing a light‐emitting layer comprised of a 30 wt.‐% blend of the dendrimer in 1,3‐bis(N‐carbazolyl)benzene (mCP) and a 1,3,5‐tris(2‐N‐phenylbenzimidazolyl)benzene electron‐transport layer have external quantum and power efficiencies, respectively, of 10.4 % and 11 lm W^–1 at 100 cd m^–2 and 6.4 V. These efficiencies are higher than those reported for more complex device structures prepared via evaporation that contain FIrpic blended with mCP as the emitting layer, showing the advantage of using a dendritic structure to control processing and intermolecular interactions. The external quantum efficiency of 10.4 % corresponds to the maximum achievable efficiency based on the photoluminescence quantum yield of the emissive film and the standard out‐coupling of light from the device.     

EXPLORING FOR FAN AND DELTA SANDSTONES IN THE OFFSHORE FALKLANDS BASINS

Four basins surround the Falkland Islands, but only the North Falkland Basin has been drilled; six wells were drilled there in 1998. Although all six wells encountered good quality sandstones, none of them targeted the basin margins, on what are now thought to be the optimum migration pathways associated with the basin's thick lacustrine source rocks. Subsequently, a 3D seismic survey acquired in 2004 was designed to identify potential basin-margin -derived sandstones entering the basin along transfer zones. From this survey, a number of basin-margin -attached fans have been identified; these prograded into lacustrine waters of varying depths. These Early Cretaceous alluvial/fan delta/deep-lacustrine fan systems are interpreted to provide excellent potential reservoir facies as they are intimately associated with thick, mature source rocks. They will provide the focus for the next planned phase of exploration in the North Falkland Basin.
A phase of drilling is also planned for the basins to the south of the Islands, where large deltaic and fan systems, slightly younger than those imaged in the North Falkland Basin, are seen on seismic to prograde from the same Palaeozoic hinterland that produced the older, North Falkland Basin fans.
This paper attempts to show how sedimentary models derived from targeted seismic programmes following initial exploration can be utilised to plan and improve new drilling campaigns in a frontier basin. It presents an analysis of sediment dispersal patterns in basins of marine and lacustrine origin linked to a single hinterland area, and highlights the nature of the relationship between relay ramp/transfer zone development and sediment dispersal patterns in the subsurface.