Four-channel polarization-insensitive optically transparent wavelength converter

Multichannel wavelength converters may be important components in the cross-connects in future wavelength-division multiplexed (WDM) transport networks. We demonstrate a multichannel, polarization-insensitive, optically transparent wavelength converter, based on four-wave mixing in two semiconductor optical amplifiers in a polarization-diversity arrangement. Bit-error-rate (BER) measurements with four input 2.5-Gb/s WDM channels, spaced by 2 nm, show penalties for wavelength conversion less than 2.6 dB at 10/sup -9/ BER. Changes in the state of polarization of the input signals cause the output power to change by less than 1.2 dB, and the corresponding power penalties change by less than 0.9 dB.     

Wavelength selection for low-saturation pulse oximetry

Conventional pulse oximeters are accurate at high oxygen saturation under a variety of physiological conditions but show worsening accuracy at lower saturation (below 70%). Numerical modeling suggests that sensors fabricated with 735 and 890 nm emitters should read more accurately at low saturation under a variety of conditions than sensors made with conventionally used 660 and 900 nm band emitters. Recent animal testing confirms this expectation. It is postulated that the most repeatable and stable accuracy of the pulse oximeter occurs when the fractional change in photon path lengths due to perturbations in the tissue (relative to the conditions present during system calibration) is equivalent at the two wavelengths. Additionally, the penetration depth (and/or breadth) of the probing light needs to be well matched at the two wavelengths in order to minimize the effects of tissue heterogeneity. At high saturation these conditions are optimally met with 660 and 900 nm band emitters, while at low saturation 735 and 890 nm provide better performance     

Development of severe secondary hypertension in a patient with systemic entomophthoromycosis

The sudden onset of hypertension mandates investigation for secondary causes. We report the case of a young man with a very rare systemic fungal disease that included massive unilateral perirenal adenopathy. Treatment was associated with the abrupt onset of severe hypertension. Imaging studies suggested progressive constriction of one kidney with treatment, presumably as a result of healing adenopathy. We suggest that this case is a new example of hypertension secondary to constrictive perinephritis (Page kidney).     

Behavioural effects induced by nitrous oxide in rats performing a vigilance task

Nitrous oxide (N2O) effects were evaluated, as a behavioural model of inert gas narcosis, in rats performing a vigilance task in which they were required to respond to a slight luminous increment of the house-light. A dose-related decrease of correct responses was produced by the tested range of concentrations of N2O (from 30 to 70% N2O), with a parallel increase of anticipatory responses up to 60% N2O and a dramatic increase of omissions at 70% N2O. The influence of preparatory period duration on hits delays suggested a 'conditional probability effect' conserved under N2O. Pretreatment of animals with flumazenil (a central benzodiazepine receptor antagonist) did not improve performance under 40% N2O. Naltrexone, an opiate receptor antagonist, however, increased the N2O-induced deficits. These results suggest that benzodiazepine receptors are not involved in N2O-induced impairments in this attentional task, but opiate mechanisms may be implicated.     

Automatic tuning of decentralized PID controllers for MIMO processes

An automatic tuning algorithm for decentralized PID control in multiple-input multiple-output (MIMO) plants is presented. This algorithm generalizes the authors' recent auto-tuner for two-input two-output systems to any number of inputs and outputs. The algorithm consists of two stages. In the first, the desired critical point, which consists of the critical gains of all the loops and a critical frequency, is identified. The auto-tuner identifies the desired critical point with almost no a priori information about the process. During the identification phase all controllers are replaced by relays, thus generating limit cycles with the same period in all loops. It is shown that each limit cycle corresponds to a single critical point of the process. By varying the relays parameters different points can be determined. The auto-tuner contains a procedure which converges rapidly to the desired critical point while maintaining the amplitudes of the process variables as well as of the manipulated variables within prespecified ranges. In the second stage, the data of the desired critical point is used to tune the PID controllers by the Ziegler-Nichols rules or their modifications. This paper focuses on the first stage. The steady-state process gains, which are required for the appropriate choice of the desired critical point, are determined by the auto-tuner in closed-loop fashion simultaneously with the identification of the critical point. The identification of the process gains is achieved at no extra plant time. Based upon a large number of simulated cases, the proposed auto-tuner seems to be efficient and robust. The paper discusses the underlying principles of the auto-tuner and its properties and capabilities are demonstrated via examples.     

Detection of an anatoxin-a(s)-like anticholinesterase in natural blooms and cultures of cyanobacteria/blue-green algae from Danish lakes and in the stomach contents of poisoned birds

Ten natural bloom samples of cyanobacteria from the Danish lakes Knud s? (5), Ravn s? (4), and Salten Langs? (1) collected during 1993-1995 were assayed for toxicity by mouse bioassay, for acetylcholinesterase inhibiting activity by a colorimetric method, and for microcystins by enzyme-linked immunosorbent assay. In the mouse bioassay, seven samples were neurotoxic, two were non-toxic and one gave a protracted toxic response. One of the non-toxic and the single protracted toxic sample both contained anticholinesterase activity equivalent to 4 micrograms anatoxin-a(s) g-1. The neurotoxic samples contained equivalents to 20-3300 micrograms anatoxin-a(s) g-1. The highest anticholinesterase activities (equivalent to 2300 and 3300 micrograms anatoxin-a(s) g-1, respectively) were found in samples collected from Lake Knud s? in connection with bird-kills in 1993 and 1994. Small amounts of microcystins (0.1-0.9 microgram g-1) were detected in all samples but one. All Lake Knud s? and Lake Ravn s? samples were dominated by Anabaena lemmermannii, and the Lake Salten Langs? sample by several species of Anabaena. Gel filtration profiles indicated similarity between the toxic component from the Lake Knud s? 1994 bloom with registered bird-kills and anatoxin-a(s) isolated from Anabaena flos-aquae NRC-525-17. Anticholinesterase-producing cultures of A. lemmermannii were isolated from the Lake Knud s? 1993 bloom. These laboratory cultures produced anatoxin-a(s) equivalents of 29-743 micrograms g-1. Other cultures of A. lemmermannii isolated from Lake Knud s? and Lake Ravn s? were hepatotoxic or non-toxic. Dead birds collected from Lake Knud s? during the neurotoxic 1993 Anabaena bloom possibly died from cyanobacterial toxicosis. The stomach contents contained colonies and single trichomes of Anabaena, and anticholinesterase activities equivalent to 2.1-89.7 micrograms anatoxin-a(s) kg-1 body weight and microcystins (53-95 ng kg-1) were also detected.     

Electrical linewidth test structures fabricated in monocrystallinefilms for reference-material applications

The physical widths of reference features incorporated into electrical linewidth test structures patterned in films of monocrystalline silicon have been determined from Kelvin voltage measurements. The films in which the test structures are patterned are electrically insulated from the bulk-silicon substrate by a layer of silicon dioxide provided by SIMOX (Separation by the IMplantation of OXygen) processing. The motivation is to facilitate the development of linewidth reference materials for critical-dimension (CD) metrology-instrument calibration. The selection of the (110) orientation of the starting silicon and the orientation of the structures' features relative to the crystal lattice enable a lattice-plane-selective etch to generate reference-feature properties of rectangular cross section and atomically planar sidewalls. These properties are highly desirable for CD applications in which feature widths are certified with nanometer-level uncertainty for use by a diverse range of CD instruments. End applications include the development and calibration of new generations of CD instruments directed at controlling processes for manufacturing devices having sub-quarter-micrometer features     

A unified diode model for circuit simulation

A new commercially available diode model is described. This unified model is capable of simulating the widest range of diode technologies of any presently available. The emphasis of this paper is on describing the model's extensive features and flexibility in the different domains of operation and is of particular interest in power applications