Application of retrodirective beams to achieve low sidelobe levelsin small phased arrays

Synthesis of beams with low sidelobe levels is a difficult problem for the case of small phased arrays with few elements. Mutual coupling between elements means that conventional weighting algorithms are not applicable. A technique is presented that calculates a complex weight vector for a five element linear array, giving a reduced sidelobe beam pattern. Sidelobes are reduced by the addition of retrodirective beams to the quiescent beam pattern. No knowledge of the coupling coefficients or element radiation patterns is required     

一种单片机虚拟实验室的建立方法

为了解决传统基于硬件的单片机实验室诸多弊端,建立基于PC和软件的虚拟实验室,即在Proteus中建立单片机硬件系统,通过Keil和Proteus的连接实现单片机系统的软硬件调试,通过虚拟串口实现上下位机的联合仿真调试.与现有基于Proteus的虚拟实验室相比,不仅实现了下位机的仿真调试,更实现了包括上位机在内的联合调试的虚拟环境.实验证明,该方法可用于单片机学习和单片机项目开发的前期工作,具有一定的实用性和工程应用价值.     

A Transcutaneous Implanted Battery Recharging and Biotelemeter Power Switching System

A system has been developed for extending the lifetime of an implantable biotelemeter (or potentially a variety of implantable electronic devices), first by recharging implanted nickel cadmium (NiCd) batteries via radio frequency power transmitted from an external portable source, and second by providing on/off electronic power switching which, when activated externally, allows for shutdown of the biotelemeter when not required and subsequent powering up when needed. The battery pack, which has been successfully evaluated in the dog, uses four sealed NiCd 100 mA ·h, 1.25 V dc cells which can be "quick charged" at 40 mA in 2.5 h. Higher or lower charge rates are available and the charging rate is telemetered for continuous battery status indication. The system has been designed to charge the implanted batteries through 13 mm tissue thickness, using 50 mm diameter transmitting and receiving coils. The on/off operation of the system is limited to a maximum 100 mm coil spacing. The switching circuitry has been implemented on a 28 ×43 mm ceramic substrate with reflow soldered integrated circuit leadless inverted devices (LID's?) and resistor and capacitor chips. It is expected that the reflow soldering can be duplicated easily by other investigators on either ceramic or glass-epoxy boards. The power transmitter and its battery pack are intended for placement in an animal jacket. The transmitter has a 2.5 W dc power input and will operate from a 1.2 A ·h, 12 V dc battery pack for the required recharging period.     

Farbication of Optically Transparent Lead Magnesium Niobate Polycrystalline Ceramics Using Hot Isostatic Pressing

The physical, dielectric, and optical properties of hot isostatically pressed lead magnesium niobate polycrystalline ceramics modified with 1/2 mol% La₂O₃, Pb_{1–3/2 x} La _x □ _{x /2}-(Mg_1/3Nb_2/3)O₃, have been investigated. Methods used to characterize the ceramics included determination of the dielectric permittivity, optical transmittance, and refractive index dispersion. The materials exhibited relaxor ferroelectric type behavior with a peak dielectric constant K > 14000 and average T _c ∼−35°C. Various sintering, hot isostatic pressing, and annealing conditions were examined to produce highly dense and optically transparent materials. Through the use of hot isostatic pressing, densities more than 99.5% theoretical and transmittance greater than 50% at 633-nm wavelength were obtained. Hot isostatic pressing technique appears to be a good alternative to hot uniaxial pressing without the associated problem of PbO volatility, reactivity with the pressure vessel, and geometrical constraints.     

Reconstruction and quantification of the carotid artery bifurcation from 3-D ultrasound images

Three-dimensional (3-D) ultrasound is a relatively new technique, which is well suited to imaging superficial blood vessels, and potentially provides a useful, noninvasive method for generating anatomically realistic 3-D models of the peripheral vasculature. Such models are essential for accurate simulation of blood flow using computational fluid dynamics (CFD), but may also be used to quantify atherosclerotic plaque more comprehensively than routine clinical methods. In this paper, we present a spline-based method for reconstructing the normal and diseased carotid artery bifurcation from images acquired using a freehand 3-D ultrasound system. The vessel wall (intima-media interface) and lumen surfaces are represented by a geometric model defined using smoothing splines. Using this coupled wall-lumen model, we demonstrate how plaque may be analyzed automatically to provide a comprehensive set of quantitative measures of size and shape, including established clinical measures, such as degree of (diameter) stenosis. The geometric accuracy of 3-D ultrasound reconstruction is assessed using pulsatile phantoms of the carotid bifurcation, and we conclude by demonstrating the in vivo application of the algorithms outlined to 3-D ultrasound scans from a series of patient carotid arteries.     

Operator dependence of 3-D ultrasound-based computational fluid dynamics for the carotid bifurcation

The association between vascular wall shear stress (WSS) and the local development of atherosclerotic plaque makes estimation of in vivo WSS of considerable interest. Three-dimensional ultrasound (3DUS) combined with computational fluid dynamics (CFD) provides a potentially valuable tool for acquiring subject-specific WSS, but the interoperator and intraoperator variability associated with WSS calculations using this method is not known. Here, the accuracy, reproducibility and operator dependence of 3DUS-based computational fluid dynamics were examined through a phantom and in vivo studies. A carotid phantom was scanned and reconstructed by two operators. In the in vivo study, four operators scanned a healthy subject a total of 11 times, and their scan data were processed by three individuals. The study showed that with some basic training, operators could acquire accurate carotid geometry for flow reconstructions. The variability of measured cross-sectional area and predicted shear stress was 8.17% and 0.193 N/m/sup 2/ respectively for the in vivo study. It was shown that the variability of the examined parameters was more dependent on the scan operators than the image processing operator. The range of variability of geometrical and flow parameters reported here can be used as a reference for future in vivo studies using the 3DUS-based CFD approach.     

Implementation of an Aerostat Positioning System With Cable Control

The capabilities of a multi-tethered aerostat positioning system are investigated using experimental and simulation results. The system consists of a platform supported by a helium-filled aerostat and attached to three anchored ground tethers actuated using computer-controlled winches. The experimental system was designed to perform a proof-of-concept study of a novel large-scale radio telescope requiring a receiver to be positioned accurately at an altitude of up to 500 m. Results from a series of flight tests are presented with a comparison between the passive response of the system and the response using proportional, integral, and derivative (PID) controllers with a position feedback. The motion of the platform is smaller for all cases using the feedback control. To improve on the PID results, a dynamics model of the system is used to develop and simulate optimal and feedforward (FF) control strategies. The optimal linear quadratic Gaussian (LQG) controller offers a 50% improvement over the PID controller, and both the LQG and the PID feedback controllers were shown to benefit considerably from the addition of a FF control term that exploits the measurements of the system's main disturbance force     

A multiple objective selection methodology for strategic industryselection analysis

An application of mathematical programming in the industry selection step of strategic acquisition analysis is presented. Specifically, the management information uses of multiple-objective programming in the strategic planning of organization acquisitions are described. The modeling approach has application to all forms of organization-acquisition analysis (i.e. acquisitions, mergers, joint ventures, etc.). An illustrative application of the modeling approach is presented using data from a regional conglomerate's actual acquisition study. The benefits of the use of the multiple-objective modeling approach include improvements in the efficacy and specificity of information on which acquisition decision making is based, and types of information that are not methodology     

基于星敏感器指向的船载雷达轴系误差分离模型

针对现有船载雷达动态标校方法的不足,提出了一种基于星敏感器的船载雷达轴系误差标校方法。该方法以精确的星敏感器地平指向为比对基准,解算船载雷达的轴系误差。设计了基于星敏感器的船载雷达动态标校方案,分析了船摇测量误差对雷达测角精度的影响,推导了天线座垂向变形引起的雷达测角误差修正模型。根据测量目标的不同,分别建立了联合测星与跟踪目标时的船载雷达轴系误差分离模型。最后通过联合测星试验对轴系误差分离模型进行了验证。试验结果表明,利用动态标校成果修正后的船载雷达方位、俯仰系统残差分别为3”和9”,随机残差分别为40”和45”,满足雷达轴系误差标定要求,具有较高的实用价值。