Hard wood‐composites made of rice straw and recycled polystyrene foam wastes

The submitted work discussed the possibility of using two of the most problematic wastes to formulate an added‐value hard wood‐composite (HWC). The lignocellulosic rice straws (RS) fibers (as reinforced filler) and recycled expanded polystyrene foam (PS) wastes (as dispersed polymer matrix), were used to formulated the hard wood product applying the hot press technique. The air dried RS was added to the molten PS at increasing ratios (30–70% mass:mass), and the reached HWC sheet was subjected to tensile strength, water absorption and acoustic resistance characterizations. Based on the experimental data, it was found that increasing the RS contents accompanied with a diminish in the tensile strength value by about 50% at 70% RS compare to that at 30% RS. To improve the adhesion between the hydrophilic filler RS and the hydrophobic PS matrix, maleated PS graft (PS‐g‐MA) was prepared and added at the expanse of the PS content, to formulate an additional wood‐composite (HWCg) aiming to have better mechanical and dimensional stability features. Results obtained indicated that increasing the coupling agent content, keeping the RS added constant, enhance the tensile strength feature in addition, reduced the water absorption for the final products by more than 45%. The data obtained suggested that, it can create added‐value hard wood composites entirely from the two nominated problematic wastes. In addition to the value gained by the environment, the reached hard wood products record acceptable mechanical characterization, dimensional stability and sound resistance properties that qualified it to replace the natural wood in many daily applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44770.     

Gene Expression Analyses Support Fallopian Tube Epithelium as the Cell of Origin of Epithelial Ovarian Cancer

Folate receptor alpha (FOLR1/FRA) is reported to be overexpressed in epithelial ovarian cancers (EOC), especially the serous histotype. Further, while dysregulation of the folate-dependent 1-carbon cycle has been implicated in tumorogenesis, little is known relative to the potential mechanism of action of FOLR1 expression in these processes. We therefore investigated the expression of FOLR1, other folate receptors, and genes within the 1-carbon cycle in samples of EOC, normal ovary and fallopian tube on a custom TaqMan Low Density Array. Also included on this array were known markers of EOC such as MSLN, MUC16 and HE4. While few differences were observed in the expression profiles of genes in the 1-carbon cycle, genes previously considered to be overexpressed in EOC (e.g., FOLR1, MSLN, MUC16 and HE4) showed significantly increased expression when comparing EOC to normal ovary. However, when the comparator was changed to normal fallopian tube, these differences were abolished, supporting the hypothesis that EOC derives from fallopian fimbriae and, further, that markers previously considered to be upregulated or overexpressed in EOC are most likely not of ovarian origin, but fallopian in derivation. Our findings therefore support the hypothesis that the cell of origin of EOC is tubal epithelium.     

Influence of shear flow on the preparation of polymer layered silicate nanocomposites

In this paper the influence of melt-processing on the final polymer/layered silicate nanocomposite morphology is discussed. In particular the role of shear forces on the transformation of the original large clay agglomerates is of interest. Several polymer nanocomposites were prepared by melt-extrusion, involving polycaprolactone, poly(ethylene oxide), polyamide-12 or polyamide-6 as the matrix polymer. The nanocomposite morphology was characterised by X-ray diffraction and transmission electron microscopy and the clay tactoid morphology with polarised optical microscopy and scanning electron microscopy. The development of the tactoid and nanocomposite morphology during melt-mixing under shear was studied time-resolved by optical microscopy in conjunction with a rheometer and synchrotron X-ray scattering together with a Couette type flow cell. The shear forces in the melt-preparation of polymer layered mineral nanocomposites facilitate the break-up of large-sized agglomerates, whereas the extent of further exfoliation of the mineral layers is determined by the compatibility between the polymer matrix and the mineral layers rather than by shear forces.     

Use of the frequency dependence of the impedance to monitor viscosity during cure

The ability to conveniently and continuously measure the processing properties of polymer resins is important both to the resin supplier and to the fabricator. Frequency dependent electromagnetic sensors (FDEMS) provide an in-situ technique for continuous measurement of the resin's rheological changes both in a laboratory press and in manufacturing tools in an autoclave. In this paper the frequency dependence of ?*(w) is used to quantitatively monitor the viscosity for a tetraglycidyl 4,4′-diaminodiphenyl methane (TGDDM) amine epoxy, to quantitatively monitor the viscosity during processing In a styrene-polyester resin, and to monitor the cure process in an autoclave during cure of a high temperature polyimide-graphite prepreg. In addition, the technique is used to measure the viscosity at various ply positions in a thick TGDDM graphite epoxy laminate during processing in an autoclave.     

Fracture and Subcritical Crack-Growth Behavior of Y-Si-Al-O-N Glasses and Si3N4 Ceramics

Fracture and environmentally assisted subcritical crack-growth processes are examined in bulk Y-Si-Al-O-N oxynitride glasses with compositions typical of the grain boundary phase of silicon nitride ceramics. Both long-crack (in compact tension specimens) as well as short-crack behavior (using indentation techniques) were investigated to establish a reliable fracture toughness and to elucidate the anomalous densification behavior of the oxynitride glass. Environmentally assisted subcritical crack-growth processes were studied in inert, moist, and wet environments under both cyclic and static loading conditions. Behavior is discussed in terms of the interaction of the environment with the crack tip. Likely mechanisms for environmentally assisted crack growth are discussed and related to the subcritical crack-growth behavior of silicon nitride ceramics.     

Dietary intake of Senegalese adults

The aim of this work is to identify major food sources and dietary constituents of Senegalese adults. We conducted a cross-sectional study, using a single 24-hour dietary recall interview. Foods were classified into food groups based on similarities in nutrient content or use. Food groups included foods consumed individually, or as part of food mixtures such as stews, soups, or sandwiches. Median consumption (amount/day) of each food was determined and examined by relevant subgroups. Participants were 50 healthy Senegalese men, aged 20-62 years recruited at the Hôpital Général de Grand Yoff in Dakar, Senegal and from Sendou village, a rural area outside Dakar. A total of 90 foods and beverages were identified and classified into 11 groups. Sixty-five percent of foods identified could be classified as meats, grains, or fruits/vegetables. Fruits and vegetables comprised 42% (38/90) of all foods; meats 12% (11/90); and grains 11% (10/90). Sauces (6%, 5/90), sweets (4%, 4/90), and desserts (4%, 4/90) were also reported. The most common fruits/vegetables reported were potato, carrot, mango, and lettuce; commonly reported grains were bread and rice; and commonly reported meats were fish, beef, and ox. There were no differences in reported daily intake of each food by age, ethnicity, education, or residence. Most foods reported were traditional to the Senegalese diet, despite the increasing availability of Western foods in Senegal.     

Shock initiation of TATB/FEFO formulations

Abstract

The shock initiation properties of transferable insensitive explosive (TIE) formulations based on the solid high explosive, triaminotrinitrobenzene (TATB), and the liquid explosive, bis(2-fluoro-2,2-dinitroethyl) formal (FEFO), are measured by wedge test, embedded particle velocity gauge and embedded manganin pressure gauge techniques and calculated using the Ignition and Growth reactive flow model. These extrudable formulations are demonstrated to be slightly more shock sensitive than the TATB/inert binder explosive, LX-17. However, the TIE formulations are much less sensitive than HMX-based explosives and still qualify as insensitive explosives in safety and hazard tests. The wedge tests showed a very steep dependence of run distance to detonation on the input shock pressure. Embedded gauge and reactive flow modeling results imply that shock initiation begins when a small amount of the solid TATB decomposes rapidly enough to heat the surrounding FEFO to decomposition temperature. The FEFO then reacts rapidly, raising the pressure and temperature sufficiently to cause surface decomposition of the TATB particles at rates comparable to those measured in other TATB-based explosives. An Ignition and Growth reactive flow model for TIE based on these assumptions yields reasonable agreement with the experimental shock initiation data.     

The association of form of gambling with problem gambling among American youth.

A random telephone survey was conducted with 2,274 United States residents aged 14 to 21. Analyses were performed to assess the relationship between the specific gambling games played and the extent of problem gambling symptoms. The forms of gambling that were most associated with gambling problems were card games, casino gambling, “other” gambling on routine activities, and betting on games of skill such as basketball, pool, or golf. The form of gambling that made the largest contribution to gambling problems per 14 days of play was casino gambling. The hypothesis that rapid forms of gambling, such as slot machines, would be the most problematic forms of gambling was not upheld. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Background Limited Performance of Long Wavelength Infrared Focal Plane Arrays Fabricated From M-Structure InAs–GaSb Superlattices

The recent introduction of a M-structure design improved both the dark current and R₀ A performances of type-II InAs-GaSb photodiodes. A focal plane array fabricated with this design was characterized at 81 K. The dark current of individual pixels was measured between 1.1 and 1.6 nA, 7 times lower than previous superlattice FPAs. This led to a higher dynamic range and longer integration times. The quantum efficiency of detectors without antireflective coating was 74%. The noise equivalent temperature difference reached 23 mK, limited only by the performance of the testing system and the read out integrated circuit. Background limited performances were demonstrated at 81 K for a 300 K background.