Design of practical broadband matching networks with commensurate transmission lines

To design broadband matching networks for microwave communication systems, commercially available computer aided design (CAD) tools are always preferred. But these tools need proper matching network topology and element values. Therefore, in this paper, a practical method is proposed to generate distributed-element matching networks with good initial element values. Then, the gain performance of the designed matching network can be optimized employing these tools. The utilization of the proposed method is illustrated by means of the given example. It is shown that proposed method provides very good initials for CAD tools.     

System- and circuit-level optimization of PLL designs for DVB-T/H receivers

This article proposes a framework for the optimization of voltage-controlled oscillator (VCO) designs in frequency synthesizers for digital video broadcasting ?C terrestrial/handheld (DVB-T/H) receivers. Linear time-invariant phase-domain model of a charge-pump phase-locked loop (PLL) is devised and includes both flicker (1/f) and thermal noise contributions from the loop oscillators. By modeling the entire receiver, it is shown that there are combinations of flicker and thermal noise contributions that result in a constant sum of inter-carrier interference (ICI) and adjacent channel interference, and constant symbol error rate as well. Consequently, optimization of the VCO phase noise spectrum is defined while maintaining the standard-specified symbol-error rate. Link-level performance evaluation is carried out to validate the stipulated trade-off. The effect of ICI mitigation schemes is discussed. Circuit-level VCO design approaches utilizing the derived trade-off are finally presented. The proposed optimization procedure is generic and is also applicable to other systems based on Orthogonal Frequency-Division Multiplexing.     

Pass-transistor based implementations of threshold logic gates for WOS filtering

This paper presents a systematic procedure to implement threshold functions by using a pass-transistor network. A main feature of the threshold gates (TGs) produced by this technique is that they do not exhibit the fan-in limitations usual when other implementation techniques are used. Thus, they are especially useful for Weighted Order Statistical (WOS) filters because the binary filters required are threshold functions which usually present a high total sum of weights. A WOS filter with its binary filters implemented as pass-transistor TGs is demonstrated in an standard 0.35 μm CMOS technology at 3.3 V. The filter shows a sample frequency well over 100 MHz at the nominal process condition and it is cheaper, faster and consumes less power than a conventional approach.     

Micrometer‐Scale Porous Buckling Shell Actuators Based on Liquid Crystal Networks

Micrometer‐scale liquid crystal network (LCN) actuators have potential for application areas like biomedical systems, soft robotics, and microfluidics. To fully harness their power, a diversification in production methods is called for, targeting unconventional shapes and complex actuation modes. Crucial for controlling LCN actuation is the combination of macroscopic shape and molecular‐scale alignment in the ground state, the latter becoming particularly challenging when the desired shape is more complex than a flat sheet. Here, one‐step processing of an LCN precursor material in a glass capillary microfluidic set‐up to mold it into thin shells is used, which are stretched by osmosis to reach a diameter of a few hundred micrometers and thickness on the order of a micrometer, before they are UV crosslinked into an LCN. The shells exhibit radial alignment of the director field and the surface is porous, with pore size that is tunable via the osmosis time. The LCN shells actuate reversibly upon heating and cooling. The decrease in order parameter upon heating induces a reduction in thickness and expansion of surface area of the shells that triggers continuous buckling in multiple locations. Such buckling porous shells are interesting as soft cargo carriers with capacity for autonomous cargo release.     

Agent-oriented techniques for network supervision

This paper presents the results of the Réseau futé (smart net) project, the goal of which is to use distributed AI and multi-agent techniques for network management and supervision. More precisely, these techniques have been applied to the partial automation of the dynamic processing (what is known about a network is always incomplete and can change at any time) of alarms and of various event notifications received by network management platforms. The system that we propose is able for example to automatically handle some alarms or to filter events of no-interest for a given operator. To achieve this goal, an assistant, or interface agent according to the model proposed by Patti Maes [MK93], has been realized. The goal of the assistant is first to learn, by observation, the behavior of the network supervision operator and second to reproduce such a behavior when the conditions in which the behavior has been learned are detected again. The learned information are stored using chronicles [Gha94]. A chronicle is a data-structure allowing programmers to represent sequences of events while taking temporal knowledge into account. Our assistant has been implemented and tested within Magenta which is a program, written in Smalltalk, that simulates (in a simplified way) a network management platform. This program respects roughly the gdmo and cmis standards.     

Detection of Carbon Dioxide in Air Using Difference-Frequency Generation Based Infrared Spectrometer

Spectroscopic detection of carbon dioxide (CO₂) in ambient air was performed using a continuous-wave mid-infrared spectrometer based on difference-frequency generation in an AgGaS₂ crystal. Significant improvement in nonlinear optical frequency conversion efficiency was achieved by Gaussian beam optical design consideration. CO₂ concentration was determined from direct-absorption spectral measurement.     

Design of UWB switched gain controlled LNA using 0.18 μm CMOS

A switched gain controlled low noise amplifier (LNA) for the 3.1- 4.8 GHz ultra-wideband system is presented. The LNA is fabricated with the 0.18 mum 1P6M standard CMOS process. Measurement of the LNA was performed using an RF probe station. In gain mode, measured results show a noise figure of 4.68-4.97 dB, gain of 12.5-13.9 dB, and input/output return loss higher than 10/8.2 dB. The input IP3 (IIP3) at 4.1 GHz is 1 dBm, and consumes 14.6 mW of power. In bypass mode, measured results show a gain of-7.0 to -8.7 dB, and input/output return loss higher than 10/6.3 dB. The input IP3 at 4.1 GHz is 9.2 dBm, and consumes 1 muW of power.     

Sequential Decoding of Convolutional Codes for Rayleigh Fading Channels

The performance of sequential decoding of long constraint length convolutional codes is evaluated for Rayleigh fading channels. Sequential decoding is not practical below a certain theoretical signal-to-noise ratio, and these theoretical limits are calculated for a number of modulation methods and code rates. As an example, with BPSK modulation, soft decisions and code rate 1/2, the theoretical signal-to-noise ratio per information bit is 5.7 dB. Above this limit the bit error rate can be made arbitrarily small by increasing the constraint length at no significant complexity cost. Furthermore, it is shown that with carefully chosen quantization steps, 8 level uniform quantization gives a negligible loss also for sequential decoding on a Rayleigh fading channel. Simulation results using 8 level quantization correspond well with the theoretical performance bounds. Also, the performance on a correlated channel with finite interleaving has been obtained. With an interleaver depth of 50×50 and a normalized doppler frequency equal to 0.01 we are only 0.5 dB away from the performance with perfect interleaving. Finally, bit error rate results show this scheme to compete well with Turbo codes.     

Spiral-CT-based assessment of tracheal stenoses using 3-D-skeletonization

PURPOSE: Demonstration of a technique for three-dimensional (3-D) assessment of tracheal-stenoses, regarding site, length and degree, based on spiral computed tomography (S-CT). PATIENTS AND METHODS: S-CT scanning and automated segmentation of the laryngo-tracheal tract (LTT) was followed by the extraction of the LTT medial axis using a skeletonization algorithm. Orthogonal to the medial axis the LTT 3-D cross-sectional profile was computed and presented as line charts, where degree and length was obtained. Values for both parameters were compared between 36 patients and 18 normal controls separately. Accuracy and precision was derived from 17 phantom studies. RESULTS: Average degree and length of tracheal stenoses was found to be 60.5% and 4.32 cm in patients compared with minor caliber changes of 8.8% and 2.31 cm in normal controls (p < 0.0001). For the phantoms an excellent correlation between the true and computed 3-D cross-sectional profile was found (p < 0.005) and an accuracy for length and degree measurements of 2.14 mm and 2.53% respectively could be determined. The corresponding figures for the precision were found to be 0.92 mm and 2.56%. CONCLUSION: LTT 3-D cross-sectional profiles permit objective, accurate and precise assessment of LTT caliber changes. Minor LTT caliber changes can be observed even in normals and, in case of an otherwise normal S-CT study, can be regarded as artifacts.