基于神威·太湖之光的非结构网格计算加速算法

在国产异构众核平台神威·太湖之光上的非结构网格计算具有稀疏存储、离散访存、数据依赖等特点,严重制约了众核处理器的性能发挥。为解决稀疏存储和离散访存问题,提出一种N阶对角染色算法,以有效平衡主从核计算并利用从核将全局访存转化为LDM访问。针对数据依赖造成的计算竞争问题,采用自适应和无依赖的任务划分方法,避免并行计算时的数据冲突。为对处理器架构和非结构网格计算进行优化,采用主核与从核异步并行的方式,差异化使用主从核以充分利用硬件资源,同时,取消处理器提供的寄存器通信机制,降低从核阵列的同步开销同时便于扩展到新一代神威平台。此外,使用计算访存异步重叠技术来充分隐藏访存延迟。利用SpMV、Integration、calcLudsFcc算子进行实验,结果表明,相比主核实现,组合加速算法在不同算例规模下平均取得了10倍的加速效果,加速比最高可达24倍,N阶对角染色算法相比非染色分块算法取得了超过5.8倍的性能加速,有效提升了数据局部性和计算并行度。该算法对有依赖关系的计算冲突算子同样具有良好的加速性能,验证了自适应和无依赖任务划分方法的有效性。     

球壳状纳米介孔腔内药物释放特性的分子动力学研究

有序纳米介孔材料的有序性、大的比表面积、孔道均匀等特性使其在药物装载、吸附、释放等方面得到广泛的应用。近年来研究者对介孔材料在药物控释方面的研究主要是通过材料制备、表征以及吸附药物后介孔材料的性能测试等几方面实现的。大多数报道都是采用实验的方法进行研究,关于模拟计算方面的研究很少,力场的选择更是模拟计算的一项挑战。依据介孔材料的独特结构构建了球壳状纳米介孔腔内药物分子释放模型,通过分子动力学的方法计算分析了药物分子的释放特性,重点考察了药物分子大小、溶液环境、介孔腔结构特征对其释放特性的影响。     

磷光粉表面包覆对铜基磷光复合材料发光及摩擦性能影响

选用热稳定性好的SiO2为包覆物,采用溶胶-凝胶法,以正硅酸乙酯为硅源,对商用磷光粉SrAl2O4∶Eu2+,Dy3+表面进行包覆,以解决磷光粉在高温下制备复合材料过程中因与金属粒子接触以及高温氧化产生猝灭的问题。实验通过热压烧结制备块体铜基磷光复合材料,考评包覆工艺对高温下制备的复合材料发光及摩擦性能的影响。通过X射线衍射、扫描电镜、荧光分光仪等设备对包覆前后磷光粉的表面形貌和发光性能进行分析和表征,采用摩擦试验机对包覆前后磷光粉与高铝青铜粉末混合制备复合材料烧结试样的摩擦性能进行研究。结果表明磷光粉表面包覆可有效避免其在高温下氧化猝灭和接触猝灭,包覆后磷光粉应用于铜基复合材料中可有效降低复合材料的磨损量,提高材料的耐磨性,当包覆比为10%时复合材料的发光性能、耐磨损性能最佳。     

硝酸羟胺的热稳定性评估及热分解机理研究

为评估氧化剂硝酸羟胺的热稳定性,使用标准液体铝皿于3K/min、4K/min、5K/min加热速率下进行热分析。借助非等温DSC曲线的参数值,应用Kissinger法和Ozawa法求得热分解反应的表观活化能和指前因子,根据Zhang-Hu-Xie-Li公式、Hu-Yang-Liang-Xie公式、Hu-Zhao-Gao公式以及Zhao-Hu-Gao公式,计算硝酸羟胺的自加速分解温度和热爆炸临界温度,并对热分解机理函数进行了研究。设计了7条热分解反应路径,采用密度泛函理论B3LYP/6-311++G(d,p)方法对硝酸羟胺的热分解进行了动力学和热力学计算。计算结果表明,硝酸羟胺热分解的自加速分解温度TSADT=370.05K,热爆炸临界温度Tbe0=388.68K,Tbp0=397.54K,热分解最可几机理函数的微分形式为f(α)=17×(1-α)18/17。硝酸羟胺热分解各路径中,动力学优先支持路径Path 6、Path 5、Path 4和Path 1生成NO和NO_2,其次是Path 2、Path 7和Path 3生成N2和N_2O。温度在373K以下时,Path 1′反应无法自发进行,硝酸羟胺无法进行自发的热分解。从热力学的角度来看,硝酸羟胺在370.05K以下储存是安全的。     

引入扰动补偿的多电机滑模协同控制研究

目的 解决多电机协同控制时容易受到非线性和外界扰动等不定因素的影响。方法 基于多电机偏差耦合控制结构,与引入扰动补偿的混合非奇异终端滑模变结构控制相结合,并与传统PI(Proportional Integral)调节器控制效果做仿真对比。结果 本文所提控制算法通过计算机仿真软件进行验证分析,该算法能够使得电机在启动时效果较好,转速误差在受到扰动时效果优于传统PI控制约8.50%;电机转矩在受到扰动后控制效果更加理想,几乎不存在迟滞时间就能达到新的负载转矩值;在受到负载扰动时转速误差波动较小,优于传统PI控制约8.83%。结论 通过计算机仿真验证得出,引入扰动补偿后的混合非奇异终端滑模变结构控制系统的响应时间和收敛速度、控制性能和鲁棒性都要优于传统PI控制的。     

Effects of shear elasticity on sea bed scattering: numerical examples

It is known that marine sediments can support both compressional and shear waves. However, published work on scattering from irregular elastic media has not examined the influence of shear on sea bed scattering in detail. A perturbation model previously developed by the authors for joint roughness-volume scattering is used to study the effects of elasticity for three sea bed types: sedimentary rock, sand with high shear speed, and sand with "normal" shear wave speed. Both bistatic and monostatic cases are considered. For sedimentary rock it is found that shear elasticity tends to increase the importance of volume scattering and decrease the importance of roughness scattering relative to the fluid case. Shear effects are shown to be small for sands.     

空间矢量脉宽调制的仿真研究及其实现

在分析了空间矢量脉宽调制（SVPWM）理论的基础上，详细地介绍了在Simulink仿真环境下实现SVPWM的方法。对交流永磁同步电动机控制系统进行了仿真研究，给出了电流仿真波形，并对电流波形进行了谐波分析。基于TMS320LF2407A，对SVPWM两种实现方案进行了分析研究。实验结果表明，SVPWM能有效地提高电机的运行性能。     

Teaching hooded crows (Corvus cornix L.) the abstract rule of choice by the matching/oddity of the sample

Six hooded crows (Corvus cornix) were trained in alternative simultaneous matching-to-sample and oddity-from-sample tasks with visual stimuli. Bird's ability to acquire the abstract same/different concept was investigated. For this purpose three stimulus sets of the following categories were used: color (black and white cards), shape (Arabic numerals "1" and "2"), and numerousness (heterogeneous arrays of 1 or 2 elements). These three sets were used for training successively and repeatedly; each time the stimulus set was changed for the next one after the criterion (80% correct or better over 30 successive trials) was reached with the previous one. The training procedure was repeated until the criterion could be reached for each of the three stimulus sets within the initial 30-50 trials. After that, the abstractness of the rule acquired by birds was tested. First, the "partial" transfer tests were conducted, which consisted in presentation of novel stimuli with familiar ones (numerals and arrays in the range from 1 to 4). At the final stage, only sets of novel numerals and arrays in the range from 5 to 8 were presented. The crows demonstrated successful transfer in all of these tests, including the test with absolutely novel stimuli (in the first 24 presentations: min 75.0%, p < 0.02; max 83.3%, p < 0.01). The level of correct choices did not differ from the baseline (p > 0.05). This allows us to conclude that birds are capable for formation of the abstract same/different concept.     

Effect of humidity on the creasability of fabrics based on chemical and flax fibres

A method for assessing the effect of the relative humidity on an important index of flax-containing cloth which characterizes the stability of their shape, their creasability, was improved. It was found that creasing of pure flax samples with maximum atmospheric humidity (=98%) increases their ability to recover the initial shape in comparison to tests in normal conditions (=65%). The kinetics of the recovery angle of the sample after bending with compression are described by an exponential equation which can be used to predict the behavior of cloth after creasing in time. The calculated coefficients of the equation can be used to predict the relaxation processes of recovery of the cloth after creasing.St. Petersburg State University of Design and Technology. Kostroma Technological Institute. Translated from Khimicheskie Volokna, No. 1, pp. 50–53, January–February, 1996.     

Experimental and clinical validation of auto- and allodermoplasty using transverse dermal micrografts in deep burns

A new method of autoallodermoplasty is proposed which is as follows: a patient's skin band is cut out 40 times less than the total area of the wound surface. The wound in the donor area is sutured tightly. The skin flap is dissected to thin transverse rectangular pieces with a special microdermatome or with a razor and then they are laid with their lateral side onto the wound and covered with the allo-skin. Experimental and clinical observations have shown that at remote terms both the anatomical and functional restitution of the integument occurred. The method is indicated for huge dermal defects of the "functionally passive" areas in patients with restricted, not big resources of the donor sites, especially in patients with high operative risk.