An on-line grain size measuring system for grain-oriented steels

It is important to monitor grain- oriented steel during production so that regions of small, loss- inducing grains can be detected. These are a rare occurrence, but need to be eliminated to prevent a stripe of small grains from passing unnoticed. On- line full- strip- width power loss measurements may overlook stripes of small grains. A system for detecting small grains is described.     

Grain-boundary segregation and precipitation of boron in 0.2 percent carbon steels

The segregation and precipitation of boron have been studied in two 0.2C−0.6Mn0.−5Mo steels containing (nominally) 10 and 50 ppm B. After heating to 1260 δC, samples were air-cooled to 870 °C and then held for times between 0 and 5000 seconds. Additional samples were heated to 1260 °C, air-cooled to 900 °C, reduced in thickness by 50 pct, and then held for various times at 870 °C, as above. The distributions of boron under these various conditions were investigated qualitatively by an autoradiographic technique. In both steels, segregation and/or precipitation of boron at austenite grain boundaries was detected under all conditions examined. Precipitation of iron borocarbide particles occurred along austenite grain boundaries in the 50 ppm B steel during cooling to the holding temperature of 870 °C, while in the 10 ppm B steel, such precipitation occurred only after long times at 870 °C. Mechanical properties of single-pass-rolled samples were measured after tempering to assess the effects of borocarbide precipitation on notch toughness. Such precipitation lowered the Charpy upper shelf energy and increased the transition temperature.     

Effect of H2O2 addition mode on enzymatic removal of phenol from wastewater in the presence of polyethylene glycol

The effect of batch and semi-batch additions of the stoichiometric amount of H₂O₂ on enzymatic removal of phenol has been studied over the phenol concentration range of 1-10 mmol/L. It is found that the ratio between the maximum H₂O₂ concentration during the reaction and the initial horseradish peroxidase concentration ((H₂O₂)_max/(HRP)_o) controls the rate of phenol removal by horseradish peroxidase in the presence of the additive, polyethylene glycol. An optimum range of this ratio is determined to be between 10 and 25 μmol/U. Empirical models are proposed to predict the values of (H₂O₂)_max/(HRP)_o required to treat given phenol concentrations under different modes for adding H₂O₂.     

Millisecond pulsars: nature's most stable clocks

The author describes the role pulsars might play in time and frequency technology. Millisecond pulsars are rapidly rotating neutron stars: some 20 km in diameter, 1.4 times as massive as the Sun, and spinning as fast as several thousand radians per second. Radio noise generated in a pulsar's magnetosphere by a highly beamed process is detectable over interstellar distances, as a periodic sequence of pulses. High-precision comparisons between pulsar time and terrestrial atomic time show that over intervals of several years, some millisecond pulsars have fractional stabilities comparable to those of the best atomic clocks. The author briefly reviews the physics of pulsars, discusses the techniques of pulsar timing measurements, and summarizes the results of careful studies of pulsar stabilities     

黑龙江省"农业需水"初探

黑龙江省复种指致为1，推算农业需水为400～500mm，而多年平均年降水量多数大于400mm，有发展雨养农业可能；三江平原多年平均年降水量550mm，为此三江平原井灌区现有耕地具有全部发展种植水稻的可能。     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.     

测井自动评价地层方法在苏堤构造带的应用

根据东海西湖凹陷地质特点 ,研制了测井自动评价地层的计算方法 ,该方法在钻遇地层中能自动追索地震反射界面、划分地层 ,识别测井相 ,对钻遇地层中烃源岩有机质丰度和含油气储集层的产能特征进行自动评价。用测井自动评价地层方法对西湖凹陷苏堤构造带的残雪构造的三口井进行了综合评价     

项目经理负责制在设计单位推广初探

论文对我国社会主义市场经济形势下设计单位管理现状进行了分析,对在设计单位推广项目经理负责制的设计组织形式、项目经理的职责及如何发挥项目经理的作用等方面进行了初步探讨。