Effect of vanadium and chromium on the microstructural features of V–Cr–Mn–Ni spheroidal carbide cast irons

The objective of this investigation is to study the influence of vanadium（5.0wt%–10.0wt%） and chromium（0–9.0wt%） on the microstructure and hardness of Cr-V-Mn-Ni white cast irons with spheroidal vanadium carbides. The alloys＇ microstructural features are presented and discussed with regard to the distribution of phase elements. The structural constituents of the alloys are spheroidal VC, proeutectoid cementite, ledeburite eutectic, rosette-shaped carbide eutectic（based on M7C3）, pearlite, martensite, and austenite. Their combinations and area fraction（AF） ratios are reported to be influenced by the alloys＇ chemical composition. Spheroidized VC particles are found to be sites for the nucleation of carbide eutectics. Cr and V are shown to substitute each other in the VC and M7C3 carbides, respectively. Chromium alloying leads to the formation of a eutectic（γ-Fe ＋ М7С3）, preventing the appearance of proeutectoid cementite in the structure. Vanadium and chromium are revealed to increase the total carbide fraction and the amount of austenite in the matrix. Cr is observed to play a key role in controlling the metallic matrix microstructure.     

Yield stress distribution in injection‐moulded glassy polymers

A methodology for structural analysis simulations is presented that incorporates the distribution of mechanical properties along the geometrical dimensions of injection‐moulded amorphous polymer products. It is based on a previously developed modelling approach, where the thermomechanical history experienced during processing was used to determine the yield stress at the end of an injection‐moulding cycle. Comparison between experimental data and simulation results showed an excellent quantitative agreement, both for short‐term tensile tests as well as long‐term creep experiments over a range of strain rates, applied stresses, and testing temperatures. Changes in mould temperature and component wall thickness, which directly affect the cooling profiles and, hence, the mechanical properties, were well captured by the methodology presented. Furthermore, it turns out that the distribution of the yield stress along a tensile bar is one of the triggers for the onset of the (strong) localization generally observed in experiments. © 2015 Society of Chemical Industry     

Determinant elements of customer relationship management in e-business

This study investigates the composition of customer relationship management (CRM) in e-business by examining the possible elements that determine different aspects of the relationship between customers and e-businesses. A web-based CRM survey of 38 items, constructed from SERVQUAL (service quality instrument), SITEQUAL (website service quality instrument) and literature findings, was completed by 200 customer contact professionals. Results of a factor analysis indicated three main customer relationship attributes of e-business, which are: general CRM (accounting for 51% of the total variance); personalization (accounting for 9% of the total variance); and privacy (accounting for 7% of the total variance). Results of a stepwise regression indicated that these customer relationship attributes significantly predict customer attitude (83% of the explained variance). Within the general CRM dimension, website content organization correlated highly with customer attitude (65% of the explained variance). The results of the study indicate that customers perceive three main dimensions of relationship attributes of e-business (general CRM, personalization and privacy) and that all three significantly contribute to customer attitude. These findings support the importance of including relational-type e-business attributes when investigating interactions between customers and e-business. The study concludes with related implications and design guidelines to enhancing customer perception of e-business.     

Ion-beam machining of millimeter scale optics

An ion-beam microcontouring process is developed and implemented for figuring millimeter scale optics. Ion figuring is a noncontact machining technique in which a beam of high-energy ions is directed toward a target substrate to remove material in a predetermined and controlled fashion. Owing to this noncontact mode of material removal, problems associated with tool wear and edge effects, which are common in conventional machining processes, are avoided. Ion-beam figuring is presented as an alternative for the final figuring of small (<1-mm) optical components. The depth of the material removed by an ion beam is a convolution between the ion-beam shape and an ion-beam dwell function, defined over a two-dimensional area of interest. Therefore determination of the beam dwell function from a desired material removal map and a known steady beam shape is a deconvolution process. A wavelet-based algorithm has been developed to model the deconvolution process in which the desired removal contours and ion-beam shapes are synthesized numerically as wavelet expansions. We then mathematically combined these expansions to compute the dwell function or the tool path for controlling the figuring process. Various models have been developed to test the stability of the algorithm and to understand the critical parameters of the figuring process. The figuring system primarily consists of a duo-plasmatron ion source that ionizes argon to generate a focused (~200-mum FWHM) ion beam. This beam is rastered over the removal surface with a perpendicular set of electrostatic plates controlled by a computer guidance system. Experimental confirmation of ion figuring is demonstrated by machining a one-dimensional sinusoidal depth profile in a prepolished silicon substrate. This profile was figured to within a rms error of 25 nm in one iteration.     

Matrix metalloproteases and their inhibitors in the pleura

Vulvovaginal candidiasis is a frequent inflammatory process in women but it has not been widely studied in female sex workers (FSWs). To estimate the frequency of Candida species infection in FSWs and to identify related risk factors and clinical findings, we carried out a retrospective study of 1923 FSWs over 11 years. We also performed a prospective study of 163 consecutive FSWs with a history of candidiasis during a 4-year period. Candida species were isolated in 1967 samples (18.5% of the total). Candida albicans (89.3%) was the most frequent species, followed by Candida glabrata (2.7%), Candida parapsilosis (1.2%) and Saccharomyces cerevisiae (0.4%). In the prospective study of 163 patients, we found vaginal discharge in 76.1% of cases, soreness in 52.1% and vulval pruritus in 32.5%. We identified 12 patients (7.4%) with recurrent vulvovaginal candidiasis. No statistical difference was found between recurrent vulvovaginitis and the use of oral contraceptives, oral sex, tight-fitting clothing and synthetic underwear. FSWs have the same prevalence of candidiasis as other groups of women described in published literature. The proportion of albicans and non-albicans species does not differ between women with recurrent and non-recurrent vulvovaginal candidiasis (VVC).     

Focal nodular hyperplasia of the liver: a rational approach to treatment

Focal nodular hyperplasia of the liver in a 3 year old child has been successfully treated by ligation of the hepatic artery branches supplying the lesion. The prominence of the abnormal vasculature in the lesion and its possible aetiological involvement is stressed. Because of the risks of partial hepatectomy, hepatic artery ligation is suggested as the treatment of choice for focal nodular hyperplasia.     

Temperature-sensitive mutant of Schizosaccharomyces pombe exhibiting enhanced radiation sensitivity

A conditional lethal and radiation-sensitive mutant of Schizosaccharomyces pombe is described in which both characteristics result from a single gene mutation. Confirmation of the pleiotropic nature of this mutant was obtained by tetrad analysis and by testing the radiation sensitivity of a large number of revertants that grew normally at the restrictive temperature. The colony-forming ability of the mutant after ultraviolet radiation, gamma radiation, and ethyl methane sulfonate treatment is considerably altered by the post-treatment incubation temperature, showing higher survival at 25 than at 30degreesC. The radiosensitivity of the mutant is also influenced by the stage of growth. The difference in radiation sensitivity between the wild type and mutant is greater when log-phase cultures are compared. The characteristics of this mutant suggest that it is defective in a step common to both deoxyribonucleic acid replication and repair.