Effect of crystallization and interface formation mechanism on mechanical properties of film‐insert injection‐molded poly(propylene) (PP) film/PP substrate

A previous study has shown that the adhesion between the film and substrate of film‐insert injection‐molded poly(propylene) (PP) film/PP substrate was evident with the increases in barrel temperature and injection holding pressure. In this second part of the research work, the crystallinity at the interfacial region (i.e., region between the film and the injected substrate) was extensively studied using FTIR imaging, polarized light microscopy, and DSC in an attempt to determine the level of influence that crystallinity has on the interface and bulk mechanical properties. Consequently, a more thorough and clearer picture of the influence of the inserted film on the interfacial crystallinity and subsequently the substrate mechanical properties, such as peel strength and impact strength, has been revealed. The initial proposition that crystallinity could enhance film–substrate interfacial bonding has been confirmed, judging from the higher peel strength with increasing crystallinity at the interfacial region. Nevertheless, the change in crystallinity was not only confined to the interfacial region. With the film acting as heat‐transfer inhibitor between the injected resin and the mold wall, the total crystal structure of the substrate was substantially altered, which subsequently affected the bulk mechanical properties. The lower impact strength of film‐insert injection‐molded samples compared to that of samples without film inserts provided evidence of how the film could impart inferior properties to the substrate. The difference in cooling rate between the substrate and film might also cause other defects such as warpage and/or residual stress build‐up within the product. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 294–301, 2005     

Backscattered electron imaging of the undersurface of resin-embedded cells by field-emission scanning electron microscopy

In this study backscattered electron (BSE) imaging was used to display cellular structures stained with heavy metals within an unstained resin by atomic number contrast in successively deeper layers. Balb/c 3T3 fibroblasts were cultured on either 13-mm discs of plastic Thermanox, commercially pure titanium or steel. The cells were fixed, stained and embedded in resin and the disc removed. The resin block containing the cells was sputter coated and examined in a field-emission scanning electron microscope. The technique allowed for the direct visualization of the cell undersurface and immediately overlying areas of cytoplasm through the surrounding embedding resin, with good resolution and contrast to a significant depth of about 2 μm, without the requirement for cutting sections. The fixation protocol was optimized in order to increase heavy metal staining for maximal backscattered electron production. The operation of the microscope was optimized to maximize the number of backscattered electrons produced and to minimize the spot size. BSE images were collected over a wide range of accelerating voltages (keV), from low values to high values to give ‘sections' of information from increasing depths within the sample. At 3–4 keV only structures a very short distance into the material were observed, essentially the areas of cell attachment to the removed substrate. At higher accelerating voltages information on cell morphology, including in particular stress fibres and cell nuclei, where heavy metals were intensely bound became more evident. The technique allowed stepwise ‘sectional’ information to be acquired. The technique should be useful for studies on cell morphology, cycle and adhesion with greater resolution than can be obtained with any light-microscope-based system.     

MicroRNAs as Potential Biomarkers in the Differential Diagnosis of Lipomatous Tumors and Their Mimics

Adipocytic tumors are the most common subtype of soft tissue tumors. In current clinical practice, distinguishing benign lipomas from well-differentiated liposarcomas (WDLPS), as well as dedifferentiated liposarcomas (DDLPS) from their morphologic mimics, remains a significant diagnostic challenge. This is especially so when examining small biopsy samples and without the aid of additional ancillary tests. Recognizing the important role that microRNAs (miRNAs) play in tumorigenesis and their potential utility in tumor classification, we analyzed routine clinical tissue samples of benign and malignant lipomatous tumors, as well as other sarcoma mimics, to identify distinguishing miRNA-based signatures that can aid in the differential diagnosis of these entities. We discovered a 6-miRNA signature that separated lipomas from WDLPS with high confidence (AUC of 0.963), as well as a separate 6-miRNA signature that distinguished DDLPS from their more aggressive histologic mimics (AUC of 0.740). Functional enrichment analysis unveiled possible mechanistic involvement of these predictive miRNAs in adipocytic cancer-related biological processes and pathways such as PI3K/AKT/mTOR and MAPK signaling, further supporting the relevance of these miRNAs as biomarkers for adipocytic tumors. Our results demonstrate that miRNA expression profiling may potentially be used as an adjunctive tool for the diagnosis of benign and malignant adipocytic tumors. Further validation studies are warranted.     

Canadian Field Soils I. Mineral Composition by XRD/XRF Measurements

Forty Canadian soils were laboratory tested for the presence of quartz and other minerals using X-ray diffraction/X-ray fluorescence techniques. On average, the highest quartz content was observed in soil samples from sites in Nova Scotia followed by Prince Edward Island sites, whereas soil sample from British Columbia sites had the lowest quartz content. The second most abundant mineral was albite that mainly occurred in soil samples from Ontario and Quebec sites. Illite was the third most abundant and prevailed in soils mainly from British Columbia and New Brunswick sites. Soil samples from British Columbia sites had the highest combined clay and silt content and were composed of illite, albite, kaolinite, and chlorite. The lowest clay content was found in the samples from the Quebec sites. The highest microcline (a potassium feldspar) content was observed in Quebec, Ontario, and Prince Edward Island sites. In contrast to other provinces, samples from Quebec and Ontario sites also included amphibole. Soil samples from Saskatchewan and Manitoba sites also comprised carbonates, i.e., calcite and dolomite. Iron oxides (e.g., goethite) were present in all soils, except the Quebec sites, but their occurrence was rather insignificant.     

Improving the electrical and mechanical behavior of electrically conductive paint by partial replacement of silver by carbon black

Partial replacement of silver particles by carbon black (low cost) in electrically conductive paint was found to decrease the electrical resistivity and increase the scratch resistance of the resulting thick film, which is for use in electrical interconnections. An effective carbon black content is 0.055 of the total filler volume. By using a total solid volume fraction of 0.1969 and a silane-propanol (1:1 by weight) solution as the vehicle, a paint that gives a thick film with resistivity 2 × 10⁻³ Ω·cm has been attained.     

A two-year measurement of rainfall attenuation of CW microwaves inSingapore

The authors present two-year statistics on the rainfall attenuation of 21.225 GHz vertically polarized CW microwave signals in Singapore. The CCIR recommendation is found to underestimate the microwave specific attenuation (dB/km) per path average rain rate (mm/h) as well as the accumulated time of attenuation exceeding preset levels. A negative exponential raindrop size distribution based on spherical droplets is constructed from the measured data     

A microcoded elliptic curve processor using FPGA technology

The implementation of a microcoded elliptic curve processor using field-programmable gate array technology is described. This processor implements optimal normal basis field operations in F(2/sup n/). The design is synthesized by a parameterized module generator, which can accommodate arbitrary n and also produce field multipliers with different speed/area tradeoffs. The control part of the processor is microcoded, enabling curve operations to be incorporated into the processor and hence reducing the chip's I/O requirements. The microcoded approach also facilitates rapid development and algorithmic optimization: for example, projective and affine coordinates were supported using different microcode. The design was successfully tested on a Xilinx Virtex XCV1000-6 device and could perform an elliptic curve multiplication over the field F(2/sup n/) using affine and projective coordinates for n=113,155, and 173.     

Lightweight,Superelastic Boron Nitride/Polydimethylsiloxane Foam as Air Dielectric Substitute for Multifunctional Capacitive Sensor Applications

Porous polymeric foams as dielectric layer for highly sensitive capacitive based pressure sensors have been extensively explored owing to their excellent flexibility and elasticity. Despite intensive efforts, most of previously reported porous polymer foams still suffer from difficulty in further lowering the attainable density limit of ≈0.1 g cm^?3 while retaining high sensitivity and compressibility due to the limitations on existing fabrication techniques and materials. Herein, utilizing 3D interconnected networks of few‐layer hexagonal boron nitride foams (h‐BNFs) as supporting frameworks, lightweight and highly porous BN/polydimethylsiloxane composite foams (BNF@PDMS) with densities reaching as low as 15 mg cm^?3 and permittivity close to that of air are fabricated. This is the lightest PDMS‐based foam reported to date. Owing to the synergistic effects between BN and PDMS, these lightweight composite foams possess excellent mechanical resilience, extremely high compressibility (up to 95% strain), good cyclic performance, and superelasticity. Being electrically nonconductive, the potential application of BNF@PDMS as a dielectric layer for capacitive sensors is further demonstrated. Remarkably, the as‐fabricated device can perform multiple sensing functions such as noncontact touch sensor, environmental monitoring sensor, and high sensitivity pressure sensor that can detect extremely low pressures of below 1 Pa.