Magnetic resonance imaging of disseminated sclerosis

Multiple sclerosis is a chronic demyelinating disease. Paraclinical examinations may contribute to the diagnosis of multiple sclerosis. Magnetic resonance imaging (MRI) has a very high sensitivity concerning multiple sclerosis, and has made it possible to visualize multiple sclerosis plaques in vivo, to follow each plaque over the course of time and in this way to obtain information about the pathogenesis. MRI has shown that the size of plaques may vary considerably, and that plaques are dynamic structures with the ability to change in size over few weeks. By using MRI and the contrast agent Gadolinium-DTPA, it is possible to distinguish a newly developed plaque from an older one. Therefore, MRI has become an important examination in therapeutic trials. Just now, MRI with Gadolinium-DTPA is being used to evaluate the efficacy of plasmapheresis and immunoglobulin treatment in a joint study between Rigshospitalet and Hvidovre Hospital.     

Circadian variations in the occurrence of cardiac arrests: initial and repeat episodes

The purpose of this study was to predict diameters of lesions induced by laser-induced thermotherapy (LITT) of benign prostatic hyperplasia (BPH) from MRI signal/tissue temperature correlations during on-line monitoring with a temperature-sensitive fast low-angle shot (FLASH) sequence. Twenty LITT procedures with Nd:YAG (1,064 nm) and diode (830 nm) lasers were monitored on line with a T1-weighted FLASH sequence at 1.5 Tesla. Interstitial prostate temperature (T) was measured on line in 10 LITT procedures and laser energy deposition in 12. Slopes of linear regression curves for signal intensity (SI) over T were applied to determine SI at 60 degrees C to estimate diameters of intraprostatic LITT lesions. Diameters of unperfused LITT lesion cores in contrast-enhanced T1-weighted images served as gold standards. Linear regression curves with an average slope of -.54% SI/degrees C were obtained in 17 LITT procedures. Correlation coefficients were r = .92-.95 for SI/T and SI/energy deposition. Baseline variation of SI at body temperature was +/-3.9%, corresponding to +/-7 degrees C. Prediction of size (13 lesions) from on-line FLASH imaging was correct in 10 of 13, whereas 3 lesions were overestimated. Prediction of LITT lesion diameters from on-line MRI monitoring is possible with a temperature-sensitive FLASH sequence in the prostate. Accuracy may suffice to assign target regions of interest to tissue locations to be protected from coagulation.     

A Golgi localization signal identified in the Menkes recombinant protein

Menkes disease arises from a genetic impairment in copper transport. The gene responsible for the phenotype has been identified as a copper transporting ATPase ( ATP7A ). Recently, the protein encoded by the ATP7A gene has been localized to the Golgi complex. In order to investigate the role of the Menkes disease protein in copper transport, recombinant constructs containing both the full-length open reading frame and an alternatively spliced form have been successfully expressed and localized in mammalian cells. Other studies of a patient with occipital horn syndrome, an allelic variant of Menkes disease, have demonstrated that only this alternatively spliced isoform and not the full-length form is expressed in this patient. The milder form of this patient's phenotype suggests that the alternatively spliced isoform has some functional role in copper transport. In the present study the full-length recombinant Menkes protein was shown by immunofluorescence to localize to the Golgi apparatus and the alternatively spliced form, lacking sequences for transmembrane domains 3 and 4 encoded by exon 10, was shown to localize to the endoplasmic reticulum. Using sequences from exon 10 fused to a non-Golgi reporter molecule, a 38 amino acid sequence containing transmembrane domain 3 of the Menkes protein was found to be sufficient for localization to the Golgi complex. Therefore, the protein sequence encoded by exon 10 may be responsible for this differential localization and both isoforms may be required for comprehensive transport of copper within the cell.     

Radionuclides in the Kara sea bottom sediments

The contents and distribution of natural (214Pb, 214Bi, 228Ac, and 208Tl) and technogenic (90Sr, 137Cs, and 60Co) radionuclides in the Kara Sea bottom sediments was analyzed by using the materials collected by R/V "Pomor" (Murmansk Marine Biological Institute). In 1994, no high (critical) concentrations of technogenic radioisotopes were found in the sea sediments, while the spots (regions) of elevated 137Cs content found in 1984 were not confirmed in 1994. It was proposed that the main sources of entry of technogenic radionuclides in the sea sediments in the last years are the flow of the Ob'-Yenisei waters and container burials of radioactive waste in the sea, which appeared to have been markedly corroded. The latter is confirmed by detection in some places of 60Co, which was not previously found in the sediments.     

Native serotonin 5-HT3 receptors expressed in Xenopus oocytes differ from homopentameric 5-HT3 receptors

Efficacies of the 5-hydroxytryptamine (serotonin) 5-HT3 receptor (5-HT3R) agonists 2-methyl-5-HT, dopamine, and m-chlorophenylbiguanide on 5-HT3R native to N1E-115 cells and on homopentameric 5-HT3R expressed in Xenopus oocytes were determined relative to that of 5-HT. Efficacies of 2-methyl-5-HT and dopamine on 5-HT3R native to differentiated N1E-115 cells are high (54 and 36%) as compared with their efficacies on homopentameric 5-HT3R-A(L) and 5-HT3R-A(S) receptors expressed in oocytes (4-8%). m-Chlorophenylbiguanide does not distinguish between 5-HT3R in N1E-115 cells and in oocytes. The distinct pharmacological profile of 5-HT3R native to differentiated N1E-115 cells is conserved when poly(A)+ mRNA from these cells is expressed in oocytes. The results indicate that, apart from the known 5-HT3R subunits, N1E-115 cells express additional proteins involved in 5-HT3R function.     

Presidential reflections

Two direct methods for the diagnosis of trichinellosis were compared: trichinoscopy and artificial digestion. Muscles from 17 wistar rats, orally infected with 500 Trichinella spiralis encysted larvae were examined. From each of the following muscles: diaphragm, tongue, masseters, intercostals, triceps brachialis and cuadriceps femoralis, 648,440 larvae from 1 g samples were recovered. The linear correlation between trichinoscopy and artificial digestion was very high and significant (r = 0.94, p < 0.0001), showing that both methods for the detection of muscular larvae did not differ significantly. In both methods, significant differences were found in the distribution of larvae per gramme of muscle.     

Effect of vanadium and chromium on the microstructural features of V–Cr–Mn–Ni spheroidal carbide cast irons

The objective of this investigation is to study the influence of vanadium（5.0wt%–10.0wt%） and chromium（0–9.0wt%） on the microstructure and hardness of Cr-V-Mn-Ni white cast irons with spheroidal vanadium carbides. The alloys＇ microstructural features are presented and discussed with regard to the distribution of phase elements. The structural constituents of the alloys are spheroidal VC, proeutectoid cementite, ledeburite eutectic, rosette-shaped carbide eutectic（based on M7C3）, pearlite, martensite, and austenite. Their combinations and area fraction（AF） ratios are reported to be influenced by the alloys＇ chemical composition. Spheroidized VC particles are found to be sites for the nucleation of carbide eutectics. Cr and V are shown to substitute each other in the VC and M7C3 carbides, respectively. Chromium alloying leads to the formation of a eutectic（γ-Fe ＋ М7С3）, preventing the appearance of proeutectoid cementite in the structure. Vanadium and chromium are revealed to increase the total carbide fraction and the amount of austenite in the matrix. Cr is observed to play a key role in controlling the metallic matrix microstructure.     

Yield stress distribution in injection‐moulded glassy polymers

A methodology for structural analysis simulations is presented that incorporates the distribution of mechanical properties along the geometrical dimensions of injection‐moulded amorphous polymer products. It is based on a previously developed modelling approach, where the thermomechanical history experienced during processing was used to determine the yield stress at the end of an injection‐moulding cycle. Comparison between experimental data and simulation results showed an excellent quantitative agreement, both for short‐term tensile tests as well as long‐term creep experiments over a range of strain rates, applied stresses, and testing temperatures. Changes in mould temperature and component wall thickness, which directly affect the cooling profiles and, hence, the mechanical properties, were well captured by the methodology presented. Furthermore, it turns out that the distribution of the yield stress along a tensile bar is one of the triggers for the onset of the (strong) localization generally observed in experiments. © 2015 Society of Chemical Industry     

Postsurgical bile leaks: endoscopic obliteration of the transpapillary pressure gradient is enough

OBJECTIVES: Bile leaks are a well documented complication of biliary surgery, occurring more frequently with laparoscopic procedures. Endoscopic therapy with a long biliary endoprosthesis traversing the site of the leak is effective. We have evaluated the hypothesis that equalizing biliary and duodenal pressures with a short transpapillary stent is an equally effective therapy for bile leaks. METHODS: Thirty one consecutive patients presenting over a 52-month period with postsurgical bile leaks were evaluated. Patients had been treated with long endoprostheses (stents or nasobiliary tubes), sphincterotomy, or short transpapillary stents. The success, complication rate, need for additional therapy, and hospitalization time of each therapeutic approach were determined. RESULTS: Endoscopic therapy was successful in all 25 patients in whom a bile leak could be documented. The clinical success, need for radiological drainage, length of hospitalization, and incidence of pancreatitis were similar for all methods of treatment. CONCLUSIONS: These results confirm that endoscopic therapy is highly successful in the treatment of postoperative bile leaks and suggest that the mechanism of healing is the equalization of bile duct and duodenal pressures, allowing flow of bile into the duodenum. The endoscopic placement of short transpapillary stents without sphincterotomy is a temporary, effective, and technically simple method of pressure equalization. This should be considered as the primary therapy for most postoperative bile leaks.