Engineering plastics from lignin. XV. Polyurethane films from chain-extended hydroxypropyl lignin

A series of polyurethane (PU) films was prepared from chain-extended hydroxypropyl lignins (CEHPL). In appearance, these films ranged from brittle and dark brown to rubbery and bronze. The thermal, mechanical, and network properties of these PUs were investigated by DMTA and DSC analysis. All films exhibited single T_g's which varied between ?53° and 101°C, depending on lignin content. From swelling experiments, molecular weight between crosslinks (M _c) was determined and found to vary over 2.5 orders of magnitude. The M _c's were related to the change in T_g that accompanied network formation. Stress–strain experiments showed a variation in Young's modulus between 7 and 1300 MPa. Most of the variation in material properties was related to lignin content and to a lesser extent to diisocyanate type, hexamethylene diisocyanate, or toluene diisocyanate. The source of the CEHPL had no effect on the observed properties. From these results it was concluded that the properties of PUs can be controlled and engineered for a wide variety of practical uses.     

The structure and properties of drawn blends of polyethylene and polypropylene

A series of highly oriented tapes has been prepared from a blend consisting of equal proportions of polyethylene and polypropylene. The mechanical properties and the structure and morphology of the samples have been investigated using DSC, optical microscopy, and wide angle and small angle diffraction, including measurements of crystal strain on samples under stress. It has been confirmed that the blend is incompatible, and a structural model has been proposed which is consistent with the observation that the polyethylene and polypropylene components act essentially independently in their response to external macroscopic stress.     

Antimicrobial activity of statistical polymethacrylic sulfopropylbetaines against gram‐positive and gram‐negative bacteria

A series of statistical copolymers derived from 2‐(dimethylamino)ethyl methacrylate with four different hydrophobic comonomers (ethyl, butyl, cyclohexyl, and octyl methacrylates) have been prepared via conventional free radical copolymerization under bulk conditions. The copolymers have been subsequently modified, with 1,3‐propanesultone to yield the corresponding polysulfoproylbetaine derivatives. Those copolymers exhibiting the requisite aqueous solubility have been screened with respect to their antimicrobial activity against two common and notorious pathogens, namely Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). We show that certain copolymers do indeed exhibit antimicrobial activity. The extent of activity is related to the molecular characteristics of the materials such as the molar composition and structure of the hydrophobic comonomer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1036–1041, 2006     

LoVis: Local Pattern Visualization for Model Refinement

Linear models are commonly used to identify trends in data. While it is an easy task to build linear models using pre‐selected variables, it is challenging to select the best variables from a large number of alternatives. Most metrics for selecting variables are global in nature, and thus not useful for identifying local patterns. In this work, we present an integrated framework with visual representations that allows the user to incrementally build and verify models in three model spaces that support local pattern discovery and summarization: model complementarity, model diversity, and model representivity. Visual representations are designed and implemented for each of the model spaces. Our visualizations enable the discovery of complementary variables, i.e., those that perform well in modeling different subsets of data points. They also support the isolation of local models based on a diversity measure. Furthermore, the system integrates a hierarchical representation to identify the outlier local trends and the local trends that share similar directions in the model space. A case study on financial risk analysis is discussed, followed by a user study.     

Hot compaction of woven nylon 6,6 multifilaments

We describe a study of the hot compaction of woven nylon 6,6 multifilaments produced by a patented procedure, developed at the University of Leeds, for creating novel single‐polymer composites. In this process, an assembly of oriented elements, often in the form of a woven cloth, is held under pressure and taken to a critical temperature so that a small fraction of the surface of each oriented element is melted, which on cooling recrystallizes to form the matrix of the single‐polymer composite. This process is therefore a way of producing novel high‐volume‐fraction polymer/polymer composites in which the two phases are chemically the same material. Nylon is an obvious candidate material for this process because oriented nylon multifilaments are available on a commercial scale. The aim of this study was first to establish the conditions of temperature and pressure for the successful hot compaction of oriented nylon 6,6 fibers and second to assess the mechanical properties of the manufactured hot‐compacted nylon sheets. A crucial aspect of this work, not previously examined in hot‐compaction studies of other oriented polymers, was the sensitivity of the properties to absorbed water, with a significant change in the properties measured immediately after hot‐compaction processing and 2 weeks later when 2% water had been absorbed by the compacted nylon sheets. As expected, the water uptake had a greater effect on those properties that depended on local chain interactions (e.g., the modulus and yield strength) and less effect on those properties that depended on the large‐scale properties of the molecular network (e.g., strength). The only negative aspect of the properties of the hot‐compacted nylon sheets was the elevated‐temperature performance of the wet sample, with the modulus falling to a very low value at a temperature of 80°C. However, apart from the elevated‐temperature performance, the majority of the measured properties of the hot‐compacted nylon sheets were comparable to those of hot‐compacted polypropylene and poly(ethylene terephthalate). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 991–997, 2006     

Effect of silica fume and fly ash on heat of hydration of Portland cement

Results of calorimeter tests on Portland cement-silica fume-fly ash mixtures are presented. Data indicate that silica fume accelerates cement hydration at high water/cementitious ratios and retards hydration at low water/cementitious ratios. On the other hand, fly ash retards cement hydration more significantly at high water/cementitious ratios. When silica fume and fly ash are added together with cement, the reactivity of the silica fume is hampered and the hydration of the cementitious system is significantly retarded.     

Effects of large mammalian herbivores and ant symbionts on condensed tannins of Acacia drepanolobium in Kenya

Condensed tannins have been considered to be important inducible defenses against mammalian herbivory. We tested for differences in condensed tannin defenses in Acacia drepanolobium in Kenya over two years among different large mammalian herbivore treatments [total exclusion, antelope only, and megaherbivore (elephants and giraffes) + antelope] and with four different ant symbiont species on the trees. We predicted that (1) condensed tannin concentrations would be lowest in the mammal treatment with the lowest level of herbivory (total exclusion), (2) trees occupied by mutualist ants that protect the trees most aggressively would have lower levels of tannins, and (3) if chemical defense production is costly, there would be a trade-off between tannin concentrations, growth, and mechanical defenses. Mean tannin concentrations increased from total exclusion treatments to wildlife-only treatments to megaherbivore + antelope treatments. In 1997, condensed tannin concentrations were significantly lower in trees occupied by the ant Crematogaster nigriceps, the only ant species that actively removed axillary buds. Contrary to our prediction, trees occupied by ant species that protect the trees more aggressively against mammalian herbivores did not have lower overall levels of condensed tannins. There was no consistent evidence of a trade-off between tannin concentrations and growth rate, but there was a positive correlation between mean thorn length and mean tannin concentrations across species of ant inhabitants and across herbivore treatments in 1997. Contrary to our expectation, trees had higher tannin concentrations in the upper parts of the canopy where there is little herbivory by mammals.     

Synthesis method comparison of compositionally complex rare earth-based Ruddlesden–Popper n = 1 T′-type cuprates

The multicomponent approach has been successfully expanded to the Ruddlesden–Popper structure with the synthesis of two different high-entropy cuprate compositions: (La_0.2Nd_0.2Gd_0.2Tb_0.2Dy_0.2)₂CuO₄ and (La_0.2Pr_0.2Nd_0.2Sm_0.2Eu_0.2)₂CuO₄. The effect of synthesis method is explored using both solid-state reaction and polymeric steric entrapment (PSE) methods. It is found that PSE leads to more randomly distributed cation species, providing an advantageous method of synthesis for the growing field of high entropy oxides. In situ high-temperature x-ray diffraction tracks the amorphous to crystalline phase transformation in (La_0.2Nd_0.2Gd_0.2Tb_0.2Dy_0.2)₂CuO₄ powder, synthesized using the PSE method. Using the High-Temperature XRD data, a method for gaining information on the kinetic behavior is also applied. Magnetometry of both compositions indicates ferrimagnetic behavior at low temperatures.     

Numerical simulation on magnetic flux leakage evaluation at high speed

High-speed non-destructive inspection (NDI) systems using magnetic flux leakage method (MFL) is in great demand in online metal inspection and defect characterisation, especially in pipeline and rail track inspection. For MFL systems at high speed measurement, in addition to magnetic flux, eddy currents exist in metal specimen because of the relative movement between the probe and specimen. These currents alter the profile of electromagnetic field, which increases difficulty in signal interpretation and defect characterization. In this paper, eddy currents generated by high speed movement and their characterisation in high-speed MFL inspection systems were investigated by using numerical simulations. Besides, the MFL signals from high speed MFL measurement against defect depth were examined.